Filter interviews by
Clear (1)
I applied via Campus Placement and was interviewed before Oct 2022. There were 4 interview rounds.
Good
Top trending discussions
I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.
I was interviewed in Aug 2023.
NGR (Next Generation Routing) is a networking technology that dynamically routes traffic based on real-time network conditions.
NGR uses machine learning algorithms to analyze network data and make routing decisions.
It can optimize traffic flow by selecting the best path based on factors like latency, bandwidth, and congestion.
NGR can adapt to changing network conditions in real-time, improving performance and reliabili...
Ngr stands for Next Generation Routing. It is a routing protocol used in networking to determine the best path for data packets to travel.
Ngr uses advanced algorithms to calculate the most efficient route for data packets.
It takes into account factors such as network congestion, latency, and available bandwidth.
Ngr helps in optimizing network performance and reducing packet loss.
Examples of Ngr protocols include OSPF (...
posted on 17 Aug 2023
I applied via Naukri.com and was interviewed in Jul 2023. There were 3 interview rounds.
Heat treatment is a process used to alter the physical and sometimes chemical properties of a material through controlled heating and cooling.
Heat treatment involves heating a material to a specific temperature, holding it at that temperature for a certain amount of time, and then cooling it at a controlled rate.
The purpose of heat treatment is to improve the material's hardness, strength, toughness, ductility, and oth...
Magnetic particle test is a non-destructive testing method used to detect surface and near-surface flaws in ferromagnetic materials.
The test involves magnetizing the component, applying magnetic particles to the surface, and inspecting for indications of defects.
Defects such as cracks, laps, seams, and inclusions can be detected using this method.
The test can be performed using either dry magnetic powder or wet fluores...
posted on 26 Jul 2023
I applied via Campus Placement and was interviewed before Jul 2022. There were 3 interview rounds.
Questions related - Thermodynamics, & Strength of materials
Discuss one a topic - suggested
posted on 27 Sep 2021
I applied via Campus Placement and was interviewed in Mar 2021. There were 3 interview rounds.
Slider crank mechanism is a simple mechanism used to convert rotary motion into reciprocating motion.
Consists of a slider, crank, connecting rod and a shaft
Used in engines, pumps, compressors, etc.
The slider moves back and forth in a straight line
The crank rotates in a circular motion
The connecting rod connects the slider and the crank
The shaft provides the rotary motion
The mechanism is used to convert the reciprocatin...
Degree of freedom refers to the number of independent variables that can be varied in a system without changing its state.
Degree of freedom is important in engineering and physics.
It helps in understanding the behavior of a system.
It is calculated as the difference between the number of variables and the number of constraints.
For example, a ball rolling on a flat surface has two degrees of freedom - forward/backward an...
Laws governing energy and its transformations in physical systems.
First law: Energy cannot be created or destroyed, only transferred or converted.
Second law: Entropy of an isolated system always increases over time.
Third law: Absolute zero cannot be reached by any finite number of processes.
Applications in engineering, physics, chemistry, and biology.
Examples include heat engines, refrigeration, and combustion processe
Enthalpy is a thermodynamic property that represents the total heat content of a system.
Enthalpy is denoted by the symbol H.
It is defined as the sum of the internal energy of a system and the product of its pressure and volume.
The formula for enthalpy is H = U + PV, where U is the internal energy, P is the pressure, and V is the volume.
Enthalpy is often used in chemical reactions to measure the heat exchanged with the ...
Entropy is a measure of disorder or randomness in a system.
Entropy is denoted by the symbol S.
The formula for entropy is S = k ln W, where k is the Boltzmann constant and W is the number of possible microstates.
Entropy increases with an increase in the number of microstates.
Entropy is a state function and is independent of the path taken to reach a particular state.
Entropy has units of J/K (joules per kelvin).
Bernoulli's theorem states that as the speed of a fluid increases, its pressure decreases.
The theorem is based on the conservation of energy in a fluid system.
It is commonly used in fluid dynamics to calculate the pressure and velocity of fluids in motion.
The theorem is applicable to both incompressible and compressible fluids.
An example of Bernoulli's theorem in action is the lift generated by an airplane wing.
The the...
posted on 12 Apr 2024
I applied via Campus Placement and was interviewed in Mar 2024. There was 1 interview round.
AC motors are classified into two main types: induction motors and synchronous motors.
Induction motors: most commonly used type, works on the principle of electromagnetic induction, no external power supply needed for rotor
Synchronous motors: rotor rotates at the same speed as the rotating magnetic field, requires external power supply for rotor
Examples: Induction motors - squirrel cage motor, wound rotor motor; Synchr...
Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, and inversely proportional to its resistance.
Ohm's law is represented by the formula V = IR, where V is voltage, I is current, and R is resistance.
It helps in calculating the current flowing through a circuit when the voltage and resistance are known.
It also helps in determining the resistance of a component...
posted on 3 May 2024
I applied via Campus Placement and was interviewed in Apr 2024. There was 1 interview round.
posted on 18 May 2020
I applied via Naukri.com and was interviewed in Nov 2019. There were 3 interview rounds.
Control valve calibration involves adjusting the valve to ensure it operates within specified parameters.
Determine the valve's operating range and desired set points
Use a calibration bench or in-line calibration equipment to adjust the valve's position and response time
Verify the valve's performance using a flow meter or pressure gauge
Document the calibration process and results for future reference
posted on 4 Nov 2023
I applied via Campus Placement
Aptitude, Reasoning, Branch Subjects, Graphs
I am a dedicated and hardworking individual with a passion for engineering. My strengths include problem-solving and attention to detail, while my weakness is sometimes being too critical of my own work. My favorite subject is mechanical engineering.
Strengths: problem-solving skills, attention to detail
Weakness: being too critical of my own work
Favorite Subject: mechanical engineering
based on 1 interview
Interview experience
Assistant Manager
102
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
46
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
45
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
38
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
Vedanta Limited