Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by TVS Sundram Fasteners Team. If you also belong to the team, you can get access from here

TVS Sundram Fasteners Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

TVS Sundram Fasteners QA QC Engineer Interview Questions and Answers

Updated 30 Mar 2022

TVS Sundram Fasteners QA QC Engineer Interview Experiences

1 interview found

I applied via Walk-in and was interviewed before Mar 2021. There was 1 interview round.

Round 1 - HR 

(6 Questions)

  • Q1. What is your family background?
  • Q2. What are your salary expectations?
  • Q3. Share details of your previous job.
  • Q4. Where do you see yourself in 5 years?
  • Q5. Tell me about yourself.
  • Q6. Hi sir quality assurance department work

Interview Preparation Tips

Topics to prepare for TVS Sundram Fasteners QA QC Engineer interview:
  • QAD
  • Production
Interview preparation tips for other job seekers - I am ashokkumar working TVS SUNDARAM FASTNESS HOSUR ,5 year working experience in QAD line inspection so instruments handling and 7qc tools,5core tools,8D ,poka yoke, kaizen important,next job quality supervisor or junior executive

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Oct 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Quality in process like this PPAP, QC
  • Ans. PPAP :- ( Part production Approvel process) this is Quality in-process any one components,pist report, CMM report,Sop , process sheet, poka yoke sheet, spot integrity report, process parameters report, Quality control, etc. Submit to costumer end
  • Answered Anonymously
  • Q2. Different between rework and repear ?
  • Ans. Rework is a extra material remove on components like this spot burr , Rusty, threading taping,etc.. Repear is a diffective components in extra material add that is ready for ok components
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Thank you ? for give me this opportunity

Regards
Shivendra patel

I applied via Company Website and was interviewed before Mar 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

Technical questions and reasoning

Round 2 - Technical 

(1 Question)

  • Q1. Related to Mechenical engineering
Round 3 - HR 

(4 Questions)

  • Q1. What is your family background?
  • Q2. Why should we hire you?
  • Q3. What are your strengths and weaknesses?
  • Q4. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Link provided for job seekers and apply this link and exam will cracked and next technical interview and hr interview then documentation and offer letter send to mail and join thi company

I applied via Referral and was interviewed in Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Tell me about your self
  • Q2. About me which is not in resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Fully confidence and feel free during interview and please Don't be nervous.

I applied via Walk-in and was interviewed before Sep 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Self introduction and basics of industrial culture, about the previous company experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Be frank and explain what did u know
And choose the industry and department based on your experience and knowledge.

Quality Engineer Interview Questions & Answers

Spark Minda user image Aman Suresh Shingade

posted on 10 Jan 2022

I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is TBO In coupler
  • Ans. 

    TBO stands for Time Between Overhaul in coupler, which is the time interval between two overhauls of a coupler.

    • TBO is a maintenance term used in the aviation industry.

    • It refers to the time interval between two overhauls of a coupler.

    • During an overhaul, the coupler is disassembled, inspected, repaired, and reassembled.

    • The TBO for a coupler depends on the manufacturer's recommendations and the coupler's usage.

    • Exceeding t...

  • Answered by AI
  • Q2. It is terminal backout

Interview Preparation Tips

Interview preparation tips for other job seekers - calm down during interview

Interview Questionnaire 

5 Questions

  • Q1. Definition of quality
  • Ans. 

    Quality is meeting or exceeding customer expectations and requirements.

    • Quality is a measure of how well a product or service meets customer needs and expectations.

    • It involves meeting or exceeding customer requirements and specifications.

    • Quality can be measured through various metrics such as defect rates, customer satisfaction, and reliability.

    • Quality is a continuous process that involves identifying and addressing are...

  • Answered by AI
  • Q2. Define poka yoke
  • Ans. 

    Poka yoke is a quality control technique used to prevent errors or defects in a process.

    • Poka yoke aims to eliminate mistakes by designing processes or systems that make errors impossible or immediately detectable.

    • It involves implementing foolproof mechanisms, such as sensors, alarms, or physical barriers, to prevent or correct errors.

    • For example, a poka yoke in a manufacturing line could be a sensor that detects if a c...

  • Answered by AI
  • Q3. Type of quality tool
  • Ans. 

    Statistical Process Control (SPC) is a quality tool used to monitor and control processes to ensure they are within acceptable limits.

    • SPC involves collecting and analyzing data to identify and eliminate sources of variation in a process.

    • Control charts are commonly used in SPC to visually display process data and identify any trends or patterns.

    • Examples of SPC tools include histograms, Pareto charts, scatter diagrams, a

  • Answered by AI
  • Q4. Define Cp Cpk
  • Ans. 

    Cp and Cpk are statistical tools used to measure process capability and determine if a process is capable of producing products within specification limits.

    • Cp measures the potential capability of a process to meet specifications

    • Cpk measures the actual capability of a process to meet specifications

    • Both Cp and Cpk are calculated using the process mean and standard deviation, as well as the upper and lower specification l...

  • Answered by AI
  • Q5. What is spc
  • Ans. 

    SPC stands for Statistical Process Control. It is a method used to monitor and control processes to ensure they are operating within acceptable limits.

    • SPC involves collecting and analyzing data to identify and reduce process variation.

    • It helps in detecting and preventing defects or errors in a process.

    • Control charts are commonly used in SPC to visually display process data and identify any trends or patterns.

    • SPC can be...

  • Answered by AI

Skills evaluated in this interview

I applied via Walk-in and was interviewed in Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. 7QC tools ,process audit ,product audit ,ppm,kaizen ,pokayoke ,8D
  • Q2. Quality related

Interview Preparation Tips

Interview preparation tips for other job seekers - Medium

I applied via Walk-in and was interviewed before Sep 2020. There was 1 interview round.

Interview Questionnaire 

8 Questions

  • Q1. Tell me about yourself.
  • Ans. 

    I am a production engineer with experience in optimizing manufacturing processes and ensuring efficient production.

    • Experienced production engineer

    • Skilled in optimizing manufacturing processes

    • Ensuring efficient production

    • Strong knowledge of production equipment and technologies

    • Proficient in analyzing data and implementing improvements

    • Collaborative team player

  • Answered by AI
  • Q2. What is your position in previous company ?
  • Ans. 

    I was a Senior Production Engineer in my previous company.

    • I held the position of Senior Production Engineer.

    • I was responsible for overseeing production processes and ensuring efficiency.

    • I worked closely with the production team to identify and resolve any issues.

    • I implemented improvements to optimize production output and reduce costs.

    • I collaborated with other departments to coordinate production schedules and meet dea...

  • Answered by AI
  • Q3. What is your role in it ?
  • Ans. 

    As a Production Engineer, my role is to oversee the manufacturing process, optimize production efficiency, and ensure quality control.

    • Overseeing the manufacturing process

    • Optimizing production efficiency

    • Ensuring quality control

    • Identifying and resolving production issues

    • Implementing process improvements

    • Collaborating with cross-functional teams

    • Monitoring production metrics and analyzing data

    • Creating and maintaining produc

  • Answered by AI
  • Q4. As a Jr. Quality Engineer. I have checked raw materials inspection, Dimensional inspection of job with respect to revised drawings, Leak test of job, Blasting & painting , And quality related issues with t...
  • Q5. What is the full form of DFT in painting ?
  • Ans. 

    DFT in painting stands for Dry Film Thickness.

    • DFT is the thickness of the paint film after it has dried.

    • It is measured using a coating thickness gauge.

    • The DFT is important for ensuring proper protection and appearance of the painted surface.

    • For example, a coating may require a minimum DFT of 2 mils to provide adequate corrosion protection.

    • DFT can also affect the drying time and curing of the paint.

  • Answered by AI
  • Q6. Dry Film Thickness.
  • Ans. 

    Dry film thickness refers to the thickness of a coating after it has dried and cured.

    • It is measured using a coating thickness gauge.

    • It is important to ensure that the dry film thickness meets the specifications for the coating.

    • The dry film thickness can affect the performance and durability of the coating.

    • Examples of coatings that require specific dry film thickness include paint, powder coating, and plating.

    • Dry film t...

  • Answered by AI
  • Q7. What if the DFT is more than requirement ?
  • Ans. 

    Excess DFT can lead to increased cost and longer production time.

    • Excess DFT can lead to increased material usage and waste.

    • It can also lead to longer production time and increased cost.

    • The excess DFT may also affect the performance and durability of the product.

    • It is important to ensure that the DFT is within the specified range to avoid these issues.

  • Answered by AI
  • Q8. There is a peel off and rundown in the job as DFT is more than requirement.

Interview Preparation Tips

Interview preparation tips for other job seekers - As per my opinion. Prepare your previous job experiene and basic knowledge of your respective department.

I applied via Recruitment Consultant and was interviewed before Feb 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. 1. Tell me about yourself?
  • Q2.  2. Explain about your project and what was your role in it?

Interview Preparation Tips

Interview preparation tips for other job seekers - I attended interview through job consultancy. I attended only HR round which was first round and I didn't attend technical round as the Quality engineer vacancy was actually for diploma people.

TVS Sundram Fasteners Interview FAQs

How many rounds are there in TVS Sundram Fasteners QA QC Engineer interview?
TVS Sundram Fasteners interview process usually has 1 rounds. The most common rounds in the TVS Sundram Fasteners interview process are HR.

Tell us how to improve this page.

TVS Sundram Fasteners QA QC Engineer Salary
based on 6 salaries
₹1.8 L/yr - ₹4.2 L/yr
49% less than the average QA QC Engineer Salary in India
View more details

TVS Sundram Fasteners QA QC Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

4.0

Salary

4.0

Job security

5.0

Company culture

5.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Assistant Manager
266 salaries
unlock blur

₹5.1 L/yr - ₹12.5 L/yr

Trainee
235 salaries
unlock blur

₹1 L/yr - ₹3 L/yr

Senior Executive
234 salaries
unlock blur

₹3.5 L/yr - ₹8.1 L/yr

Executive
217 salaries
unlock blur

₹2.3 L/yr - ₹6 L/yr

Quality Inspector
202 salaries
unlock blur

₹0.9 L/yr - ₹3 L/yr

Explore more salaries
Compare TVS Sundram Fasteners with

JBM Group

4.0
Compare

Subros

3.8
Compare

Ceat Tyres

4.0
Compare

UNO Minda

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview