TVS Sundram Fasteners Machine Operator Trainee Interview Questions and Answers

Q1. What is difference between G code and M code
Ans. 
G code is used to control the movement of the machine, while M code is used to control machine functions.
• G code is used for specifying the movements of the machine, such as cutting speed and tool path.

• M code is used for controlling machine functions like turning on/off coolant or spindle.

• G codes are preparatory functions, while M codes are auxiliary functions.

• Example: G01 is a G code for linear interpolation, M06 is an
Answered by AI
Add your answer
Q2. What is m01 and how is it work
Ans. 
m01 is a program stop command used in CNC machining to pause the machine at a specific point in the program.
• m01 is a code used in G-code programming to temporarily stop the CNC machine

• It is often used for tool changes, inspection, or to manually adjust the workpiece

• The machine will remain paused until the operator manually resumes the program
Answered by AI
Add your answer

Q1. What is g code
Ans. 
G code is a programming language used to control CNC machines.
• G code is a standardized language used to instruct CNC machines on how to perform specific tasks.

• It consists of letters and numbers that represent different commands and parameters.

• For example, G00 is a rapid move command that tells the machine to move quickly to a specified position.

• G01 is a linear interpolation command that tells the machine to move in a s...read more
Answered by AI
Add your answer
Q2. What is m code
Ans. 
M code is a standard set of machine codes used to control CNC machines.
• M codes are used to activate or deactivate certain functions on a CNC machine.

• They are typically used for tool changes, coolant control, spindle speed, and other machine functions.

• Examples of M codes include M06 for tool change and M08 for coolant on.
Answered by AI
Add your answer

Q1. Haw to give offset
Ans. 
To give offset in CNC machining, adjust the tool position relative to the workpiece.
• Access the offset settings on the CNC machine control panel.

• Enter the desired offset values for length, width, and height adjustments.

• Verify the offset adjustments by running a test program on scrap material.

• Make fine adjustments as needed to achieve the desired machining results.
Answered by AI
Add your answer
Q2. Haw to start cnc
Ans. 
To start a CNC machine, power on the machine, load the program, set the workpiece, and press the start button.
• Power on the CNC machine by flipping the switch

• Load the program into the machine's control panel

• Set the workpiece securely in place on the machine bed

• Press the start button to begin the machining process
Answered by AI
Add your answer

Q1. Knowledge and skills
View 4 more answers
Q2. Salary over timeining
View 1 more answer
Q3. You have technical knowledge sir
Add your answer
Q4. You have any questions
Add your answer
Q5. You have a any ethics and good skills
Add your answer
Q6. You give a job I improve the company
Add your answer
Q7. I gave no loss only company
Add your answer
Q8. How much around are going
Add your answer
Q9. You attend the all around intview sir
Add your answer
Q10. I want to be company ower
Add your answer
Q11. I have gave 100 prectage results sir
Add your answer
Q12. What is your company name
View 1 more answer
Q13. I am impressed I want company now
Add your answer
Q14. How many percentage you gave me sir
Add your answer
Q15. What is your ambition sir
Add your answer
Q16. How round are going sir
Add your answer
Q17. I have no qeustion and no ideas
Add your answer
Q18. What is your name sir
Add your answer
Q19. What is Mee by coding test
Ans. 
Coding test refers to a test designed to evaluate a candidate's programming skills and knowledge.
• Coding tests are commonly used in the hiring process for software development roles.

• They may involve solving programming problems or writing code to meet specific requirements.

• Coding tests can be administered online or in-person, and may be timed or untimed.

• Examples of coding tests include HackerRank, Codility, and LeetCode
Answered by AI
Add your answer
Q20. What is going on sir
Add your answer
Q21. What is mean by quality test 100 percentage give you sir
Ans. 
Quality test 100% refers to conducting tests on every product to ensure it meets the required standards.
• Quality test 100% means that every product is tested to ensure it meets the required standards.

• It involves conducting tests on each product in a batch or production run.

• This ensures that no defective or substandard products are released to the market.

• Quality test 100% helps maintain customer satisfaction and brand re...read more
Answered by AI
View 3 more answers
Q22. I have job sir no sir
Add your answer
Q23. This is 20 question sir
Add your answer
Q24. Thanks you sir good night sir
Add your answer
Q25. How much is your working sir
Add your answer
Q26. What is mean by mandircter
Ans. 
Mandircter is not a recognized term. It may be a misspelling or a made-up word.
• Mandircter is not a known term in the English language

• It is possible that the interviewer misspoke or meant to ask a different question

• Without more context or information, it is difficult to provide a meaningful answer
Answered by AI
Add your answer
Q27. What is mean your company sir
Add your answer
Q28. I am going to sleep sir
Add your answer
Q29. This is not my phone this is my phone sir
Add your answer
Q30. I have no money sir ok
Add your answer
Q31. My bike is dry iam also dry
Add your answer
Q32. I attend many intview no use sir
Add your answer
Q33. 2 years no byd talk to me I was in alone
Add your answer
Q34. 29 year 3 only job going
Add your answer
Q35. End IAM also end job
Add your answer
Q36. 3 year in leg injury full plate
Ans. 
I'm sorry, I don't understand the question.
• Please provide more context or rephrase the question.

• It is unclear how this relates to the job of a machine operator.

• Without additional information, I cannot provide a relevant answer.
Answered by AI
Add your answer

Good producting

Q1. I have good skills to arosch your company
Add your answer
Q2. I have only 10 th how many questions
Add your answer

Q1. What are your strengths and weaknesses?
Add your answer
Q2. What is your salary I want become you
Add your answer
Q3. How much year are working you sir
Add your answer
Q4. What is your asiment
Ans. 
I'm sorry, I don't understand the question. Could you please rephrase it?
• Ask for clarification on the question

• Request for more information

• Seek to understand the context of the question
Answered by AI
Add your answer

Q1. If you come to work what will you need checking before start the work?
View 1 more answer

Covid-19

Q1. Self Introduction and Project work details
Add your answer

Q1. Working department related
Add your answer
Q2. Company related question
Add your answer
Q3. Personal related question's
Add your answer
Q4. General knowledge question
Add your answer
Q5. Company working job related
Add your answer

Q1. First of all they ask our study's and family background Then they ask, what are skills you have
Add your answer

Q1. The technical person ask the question in this area They ask the question about cnc machine,basic of cnc programs,and what are the ability to decide in the sudden critical situation And they mainly ask the...read more
Add your answer

Q1. Family background
Add your answer
Q2. Certificate verification
Add your answer
Q3. Training for 15 days
Add your answer