Upload Button Icon Add office photos

Sundaram Clayton

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Sundaram Clayton Senior Production Engineer Interview Questions and Answers

Updated 7 Dec 2021

Sundaram Clayton Senior Production Engineer Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Types of QC tools
  • Ans. 

    QC tools are used to ensure product quality. Types include statistical process control, Pareto charts, and fishbone diagrams.

    • Statistical process control

    • Pareto charts

    • Fishbone diagrams

    • Control charts

    • Histograms

    • Scatter diagrams

    • Check sheets

    • Flowcharts

    • Cause-and-effect diagrams

  • Answered by AI
  • Q2. Problem solving techniques
  • Ans. 

    Problem solving techniques involve identifying the root cause of an issue and developing a plan to address it.

    • Gather information and data to fully understand the problem

    • Break down the problem into smaller, more manageable parts

    • Brainstorm potential solutions and evaluate their feasibility

    • Implement the chosen solution and monitor its effectiveness

    • Continuously assess and adjust the solution as needed

  • Answered by AI
  • Q3. CNC programmingand methodology
  • Q4. Troubleshooting of CNC programming
  • Ans. 

    Troubleshooting CNC programming involves identifying and resolving errors in the code.

    • Check for syntax errors in the code

    • Verify that the correct tool paths are being used

    • Ensure that the machine is properly calibrated

    • Inspect the tooling for wear or damage

    • Monitor the machine during operation for any abnormalities

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Well prepared and on time answer for each questions

Skills evaluated in this interview

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Open pump house and Tunnels
  • Q2. Road and

Interview Preparation Tips

Interview preparation tips for other job seekers - Navayaga engineering company Ltd

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Open pump house and Tunnels
  • Q2. Road and

Interview Preparation Tips

Interview preparation tips for other job seekers - Navayaga engineering company Ltd

I applied via Campus Placement and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Basics about the education and knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - They hire in rnd very easily ...not a big task..
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. About your work
Round 2 - Technical 

(1 Question)

  • Q1. Previous experience

I applied via Referral and was interviewed in Aug 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Difficulty is moderate. Asked question as per resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Go through your resume and prepare as per that
Interview experience
4
Good
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I was interviewed before Jan 2024.

Round 1 - HR 

(2 Questions)

  • Q1. How many last ctc
  • Ans. 

    The question is asking about the candidate's last drawn salary (CTC).

    • CTC stands for Cost to Company and refers to the total salary package of an employee including all benefits and perks.

    • The candidate should provide the exact amount or range of their last drawn CTC.

    • It is important to be honest and transparent about the last CTC to negotiate effectively for the new role.

  • Answered by AI
  • Q2. Your CTC pakage

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare before technical interview
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2022. There were 3 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What is your Experience
  • Q2. What is your expected CTC
  • Ans. 

    My expected CTC is in line with industry standards for a Sr. Engineer role.

    • Research industry standards for Sr. Engineer roles in the current market

    • Consider my years of experience, skills, and qualifications when determining my expected CTC

    • Be open to negotiation based on the overall compensation package offered

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Make Star-Delta electrical wiring diagram.
  • Ans. 

    Star-Delta wiring diagram involves connecting a motor in two different configurations for starting and running.

    • Star connection involves connecting all three terminals of the motor windings together to form a star shape.

    • Delta connection involves connecting the terminals in a triangular shape.

    • Switching between star and delta configurations is done using a special motor starter.

    • Star-Delta wiring is commonly used for reduc...

  • Answered by AI
  • Q2. Make star-delta ladder logic.
  • Ans. 

    Star-delta ladder logic is used to control the starting method of a three-phase induction motor.

    • Use two sets of contactors to switch between star and delta connections.

    • Implement a timer to delay the transition from star to delta.

    • Include overload protection for the motor.

    • Ensure proper interlocking to prevent simultaneous connection of star and delta.

    • Test the ladder logic thoroughly before implementation.

  • Answered by AI
Round 3 - Disscussion Round withPlant Head 

(1 Question)

  • Q1. Energy Saving questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident about your technical skills.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Casting & forging
  • Q2. Casting forging subject any questions
  • Q3. Casting pouring

Interview Preparation Tips

Interview preparation tips for other job seekers - Sourcing
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Technicals about powertrain design
  • Q2. Basic questions about function of parts
  • Q3. Basic questions about how to address field concerns
Round 2 - HR 

(1 Question)

  • Q1. Why do you want to join
Contribute & help others!
anonymous
You can choose to be anonymous

Sundaram Clayton Interview FAQs

How to prepare for Sundaram Clayton Senior Production Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Sundaram Clayton. The most common topics and skills that interviewers at Sundaram Clayton expect are Die Casting, HPDC and LPDC.
What are the top questions asked in Sundaram Clayton Senior Production Engineer interview?

Some of the top questions asked at the Sundaram Clayton Senior Production Engineer interview -

  1. Troubleshooting of CNC programmi...read more
  2. Types of QC too...read more
  3. Problem solving techniqu...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

INTERVIEWS

L&T Construction

No Interviews

INTERVIEWS

Akamai Technologies

No Interviews

INTERVIEWS

L&T Construction

No Interviews

INTERVIEWS

Sundaram Clayton

No Interviews

INTERVIEWS

Akamai Technologies

No Interviews

INTERVIEWS

Sundaram Clayton

No Interviews

INTERVIEWS

Sundaram Clayton

No Interviews

INTERVIEWS

Sundaram Clayton

No Interviews

Tell us how to improve this page.

Sundaram Clayton Senior Production Engineer Salary
based on 80 salaries
₹5 L/yr - ₹10.5 L/yr
17% more than the average Senior Production Engineer Salary in India
View more details

Sundaram Clayton Senior Production Engineer Reviews and Ratings

based on 9 reviews

3.4/5

Rating in categories

2.4

Skill development

1.6

Work-life balance

4.1

Salary

2.3

Job security

2.4

Company culture

2.8

Promotions

2.6

Work satisfaction

Explore 9 Reviews and Ratings
Assistant Manager
154 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
124 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Inspector
110 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Production Engineer
80 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
72 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Sundaram Clayton with

Bharat Forge

3.9
Compare

Mahindra & Mahindra

4.1
Compare

Ashok Leyland

4.1
Compare

Tata Motors

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent