Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Feb 2022. There were 3 interview rounds.
Introduction
Name
study
workplace
family members
from where you belongs
are some of the things which I remember and what's are the things you do after reaching the company is the last question asked on day one which I remember
Controlled extraction is a process where the extraction rate is regulated, while uncontrolled extraction is a process where the extraction rate is not regulated.
Controlled extraction involves regulating the rate of extraction to achieve a desired outcome
Uncontrolled extraction involves allowing the extraction to occur without any regulation or control
Examples of controlled extraction include brewing coffee or tea, whil...
SSC increases when load is reduced due to increased reactive power. Decreasing vacuum may indicate a leak or malfunction. Turbine bearing temperatures and alarms/trippings values depend on specific turbine model and operating conditions.
SSC (Synchronous Condenser Capacity) increases when load is reduced due to increased reactive power.
Decreasing vacuum may indicate a leak or malfunction in the system. As a DCS engineer...
I was interviewed in Feb 2025.
I was interviewed in Dec 2024.
Utkarsh small finance bank teller officer 1years experience
Body language and otherwise something problem yet
I applied via Recruitment Consulltant and was interviewed in Aug 2024. There were 2 interview rounds.
Experienced SAP PM Consultant with a strong background in implementing and optimizing SAP solutions for various industries.
Over 5 years of experience in SAP PM implementation and customization
Proficient in configuring and optimizing SAP PM modules to meet client requirements
Strong understanding of maintenance planning, scheduling, and execution processes
Successfully led multiple SAP PM projects from initiation to compl...
Yes, I am comfortable to relocate to Noida.
I am open to new opportunities and challenges in Noida.
I have experience relocating for previous job roles.
I have researched the area and feel comfortable with the move.
Seeking new challenges and growth opportunities in a different environment.
Looking for new challenges and opportunities for growth
Interested in expanding my skill set and knowledge
Seeking a more dynamic work environment
Want to work with a different team and learn from new colleagues
Experienced SAP PM Consultant with a strong background in implementing and optimizing SAP solutions for various industries.
Over 5 years of experience in SAP PM implementation and customization
Proficient in analyzing business requirements and translating them into technical solutions
Skilled in conducting workshops, training sessions, and providing post-implementation support
Successfully led multiple SAP PM projects for ...
Tables in SAP are database objects that store data in a structured format.
Tables in SAP are used to store data in a structured format.
They consist of fields and records.
Tables can be customized or standard in SAP.
Examples of SAP tables include MARA (Material Master), KNA1 (Customer Master), and VBAK (Sales Document Header).
On average, I receive around 20 tickets per week through the support portal.
I typically receive a mix of tickets related to system errors, user issues, and enhancement requests.
Some examples of tickets include resolving authorization errors, troubleshooting equipment breakdowns, and implementing new functionality.
I prioritize tickets based on urgency and impact on business operations.
I faced challenges in coordinating with multiple stakeholders and managing conflicting priorities.
Balancing the needs and expectations of different departments within the organization
Dealing with conflicting priorities and deadlines
Managing communication and expectations with clients and team members
Adapting to changing project requirements and timelines
Various types of reports can be made in SAP PM, such as work order reports, maintenance history reports, and equipment status reports.
Work order reports provide details on work orders created, completed, or in progress.
Maintenance history reports show the maintenance activities performed on equipment or assets.
Equipment status reports display the current status of equipment, such as operational, under maintenance, or o
Triveni Engineering & Industries interview questions for popular designations
Engine transmission is the mechanism that transmits power from the engine to the wheels of a vehicle while it is running.
Engine transmission transfers power from the engine to the wheels
It consists of components like gears, shafts, and clutches
Proper maintenance and lubrication are essential for smooth operation
The 'All Running Defcult' problem refers to a situation where all equipment or machinery is experiencing difficulties while in operation.
Check for common issues such as lack of maintenance or improper calibration
Inspect each equipment individually to identify specific problems
Consult with other technicians or engineers for troubleshooting assistance
Get interview-ready with Top Triveni Engineering & Industries Interview Questions
I applied via Approached by Company and was interviewed in Apr 2024. There was 1 interview round.
A boiler is a closed vessel in which water or other fluid is heated.
Boilers are used to generate steam or hot water for heating, processing, or power generation
They can be fueled by natural gas, oil, coal, or electricity
Boilers have pressure and temperature controls to ensure safe operation
Silica in DM water can cause scaling and corrosion in boiler systems.
Silica in DM water can lead to scaling on boiler tubes and heat exchangers.
High levels of silica can also cause corrosion in boiler systems.
Regular monitoring and treatment of DM water is essential to prevent silica buildup.
Examples of treatment methods include ion exchange resins and reverse osmosis systems.
Dearetor in chemical dosing % refers to the percentage of chemical dosing in the deaerator system.
Dearetor in chemical dosing % is the amount of chemical added to the deaerator system to prevent corrosion and scale buildup.
The percentage of chemical dosing can vary depending on the specific requirements of the system and the type of chemicals being used.
For example, a typical range for chemical dosing in a deaerator sy...
Water wall tubes are typically made of carbon steel, stainless steel, or alloy steel to withstand high temperatures and pressure.
Water wall tubes are commonly made of carbon steel due to its cost-effectiveness and durability.
Stainless steel water wall tubes are used in applications where corrosion resistance is important.
Alloy steel water wall tubes are preferred for high-pressure and high-temperature environments.
Comm...
Super heater tubes are typically made of alloy steel to withstand high temperatures and pressures.
Super heater tubes are commonly made of materials like T11, T22, T91, etc.
Alloy steel is preferred for its high temperature and pressure resistance.
The material composition may vary based on the specific requirements of the boiler system.
Tube failure can occur due to various reasons such as corrosion, erosion, overheating, and mechanical stress.
Corrosion from water or chemical reactions can weaken the tube material.
Erosion from high velocity fluid flow can wear down the tube walls.
Overheating can cause the tube material to weaken and eventually fail.
Mechanical stress from pressure fluctuations or vibrations can lead to cracks and failures.
Examples: Cor...
Super heater steam speed is the velocity at which steam flows through the super heater tubes.
Super heater steam speed is typically measured in meters per second or feet per minute.
Higher steam speeds can increase heat transfer efficiency in the super heater.
Proper steam speed is crucial to prevent overheating or underheating of the super heater tubes.
Steam drum spare parts include level gauges, safety valves, blowdown valves, and pressure switches.
Level gauges
Safety valves
Blowdown valves
Pressure switches
Total moisture in coal refers to the moisture content present in coal including both surface moisture and inherent moisture.
Total moisture in coal is the sum of surface moisture and inherent moisture.
Surface moisture is the moisture present on the surface of coal particles, while inherent moisture is the moisture contained within the coal itself.
Total moisture affects the calorific value and combustion efficiency of co...
Slop in total oxygen % refers to the amount of oxygen present in the slop being used in the boiler operation.
Slop in total oxygen % is an important parameter to monitor in boiler operation as it affects combustion efficiency.
High levels of oxygen in slop can indicate incomplete combustion, leading to energy loss and increased emissions.
Regular monitoring and adjustment of oxygen levels in slop can help optimize boiler
I applied via Campus Placement
Its very easy process, ask basics questions of technical subjects, reasoning, English and apptitute also take psychometric test
GD topic : attitude is altitude
My favorite subject is Thermodynamics.
I find Thermodynamics fascinating because it deals with the study of energy and its transformations.
I enjoy learning about the laws of thermodynamics and how they apply to various systems.
Thermodynamics plays a crucial role in mechanical engineering, especially in areas like heat transfer and energy conversion.
I have worked on projects involving thermodynamic analysis, such as desi...
I was interviewed in May 2024.
I applied via Naukri.com and was interviewed in Oct 2023. There were 3 interview rounds.
I applied via LinkedIn and was interviewed in Aug 2023. There were 3 interview rounds.
Mirror images, quantitative aptitude
Modern dam in 2023 time: 15 minutes for 8 people
Rankine cycle is a thermodynamic cycle used in power plants to convert heat into mechanical work.
Rankine cycle is a theoretical cycle that represents the operation of a steam power plant.
It consists of four processes: heating, expansion, cooling, and compression.
The cycle uses a working fluid, typically water or steam, to transfer heat and perform work.
The heat source is usually a boiler where fuel is burned to produce...
Runner power is the amount of work done by a runner in a given time. Impulse momentum principle states that the change in momentum of an object is equal to the impulse applied to it.
Runner power is a measure of how much work a runner can do in a specific time period.
It is calculated by dividing the work done by the time taken.
For example, if a runner completes a 10 km race in 1 hour, their power can be calculated by di...
Top trending discussions
Some of the top questions asked at the Triveni Engineering & Industries interview -
The duration of Triveni Engineering & Industries interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 46 interviews
Interview experience
based on 521 reviews
Rating in categories
Deputy Manager
62
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
53
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
41
salaries
| ₹0 L/yr - ₹0 L/yr |
Design Engineer
32
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
24
salaries
| ₹0 L/yr - ₹0 L/yr |
BHEL
Thermax Limited
Kirloskar Brothers
Larsen & Toubro Limited