Transrail Lighting
20+ Jay Ambe International School Interview Questions and Answers
Q1. If payment made to non resident for technical services in foreign countries - what is the tds rate and tds applicability
TDS rate for payment made to non-resident for technical services in foreign countries and its applicability.
TDS rate is usually 10% for payment made to non-residents for technical services in foreign countries.
TDS is applicable if the payment exceeds a certain threshold amount.
The payer is responsible for deducting TDS before making the payment to the non-resident.
The TDS amount deducted must be deposited with the government within the specified time frame.
Failure to deduct o...read more
Q2. Types of accidents, henrich theary, UA/ UC and near miss, difference between major and minor accidents, what reporting. And non reporting accidents, about 5Ws in the investigation of accident. About Dangerous a...
read moreThe answer includes types of accidents, Heinrich theory, UA/UC and near miss, difference between major and minor accidents, reporting and non-reporting accidents, 5Ws in accident investigation, dangerous occurrences, definition of safety, and calculation formula for working man hours and man days.
Types of accidents include slips, trips, falls, machinery accidents, electrical accidents, etc.
Heinrich theory states that for every major accident, there are a certain number of min...read more
Q3. What do you know about aluminum conductors?
Aluminum conductors are used in electrical systems for their lightweight, high conductivity, and cost-effectiveness.
Aluminum conductors are commonly used in power transmission and distribution systems.
They are preferred over copper conductors due to their lower cost and lighter weight.
Aluminum conductors have a high electrical conductivity, allowing efficient transmission of electricity.
They are often used in overhead power lines, electrical cables, and busbars.
Aluminum condu...read more
Q4. How do you recognise revenue in construction projects- which method is used
Revenue in construction projects is recognized using the percentage of completion method or completed contract method.
Percentage of completion method recognizes revenue based on the percentage of work completed
Completed contract method recognizes revenue only when the project is completed
Percentage of completion method is more commonly used as it provides a more accurate representation of revenue over time
Example: If a construction project is 50% complete, 50% of the total re...read more
Q5. Do you know the Grade of material and fabrication process?
Yes, the grade of material refers to its quality and the fabrication process refers to how it is made.
Grade of material refers to the quality or purity of the material used in manufacturing.
Fabrication process refers to the method used to shape, cut, and assemble materials into a final product.
Examples of grades of material include stainless steel grades like 304 or 316, and fabrication processes include welding, machining, and casting.
Q6. What are the key considerations for the foundation in transmission line construction?
Key considerations for foundation in transmission line construction
Soil type and bearing capacity must be assessed
Proper foundation design to support the weight and wind loads of the transmission line towers
Consideration of environmental factors such as seismic activity and flooding
Accessibility for construction equipment and maintenance
Proper drainage to prevent erosion and foundation instability
Q7. What is the role of the diagonal in the transmission sector?
The diagonal in the transmission sector plays a crucial role in providing structural stability and support to the transmission towers.
The diagonal members in transmission towers help to distribute the load and provide stability against wind and seismic forces.
They prevent the tower from buckling or collapsing under various loads.
Diagonals also help in reducing the overall weight of the tower by transferring some of the load to the ground.
Proper design and placement of diagona...read more
Q8. What about CAPA against customer complaints?
CAPA against customer complaints involves investigating root causes, implementing corrective actions, and preventing recurrence.
Investigate customer complaints thoroughly to identify root causes
Implement corrective actions to address the identified issues
Prevent recurrence of similar complaints by updating processes or procedures
Document all steps taken in the CAPA process for future reference
Regularly review and analyze customer complaints to identify trends or recurring iss...read more
Q9. How do you handle a site in the transmission sector?
Handling a site in the transmission sector involves coordinating with various stakeholders, ensuring compliance with regulations, and overseeing the construction process.
Coordinate with utility companies to ensure proper installation of transmission lines
Ensure compliance with safety regulations and environmental standards
Oversee the construction process to ensure quality and timely completion
Manage and resolve any issues or conflicts that may arise on site
Regularly inspect a...read more
Q10. What is the best method for erection in transmission?
The best method for erection in transmission is using cranes and specialized equipment.
Use cranes for lifting and placing heavy transmission components
Ensure proper planning and coordination to avoid delays
Utilize specialized equipment for precise positioning
Follow safety protocols to prevent accidents
Consider environmental factors such as wind and terrain
Q11. How to fill cube and whats you have checked on site
To fill a cube, ensure all sides are properly aligned and filled with the material. Check for any gaps or air pockets.
Ensure the cube mold is clean and dry before filling.
Pour the material into the mold slowly and evenly to prevent air pockets.
Use a vibrating table to help settle the material and remove any air bubbles.
Check for any leaks or cracks in the mold before filling to prevent material from leaking out.
After filling, tap the sides of the mold gently to ensure the mat...read more
Q12. What type of steel Structure have you done and explain one?
I have experience working on various types of steel structures, including industrial warehouses, commercial buildings, and residential homes.
Industrial warehouses: Designed and managed the construction of a large steel structure for a warehouse facility.
Commercial buildings: Oversaw the installation of steel beams and columns for a multi-story office building.
Residential homes: Worked on the design and construction of steel framing for custom-built homes.
Q13. How do you determine what protective gear you need?
I determine the protective gear needed based on the specific hazards present in the work environment.
Identify potential hazards in the work environment
Refer to safety regulations and guidelines for required protective gear
Consider the tasks being performed and the level of risk involved
Consult with safety professionals or colleagues with expertise in HSE
Regularly review and update the protective gear based on changes in the work environment
Examples: hard hats for head protect...read more
Q14. What safety measures do you currently take?
I implement safety measures such as conducting regular safety inspections, providing safety training to employees, and enforcing safety protocols.
Conducting regular safety inspections to identify and address potential hazards
Providing safety training to employees on proper safety procedures and equipment usage
Enforcing safety protocols to ensure compliance and prevent accidents
Q15. Do you know root cause analysis?
Root cause analysis is a systematic process used to identify the underlying causes of problems or issues.
Root cause analysis involves identifying the primary cause of a problem rather than just addressing the symptoms.
It helps in preventing the recurrence of issues by addressing the root cause.
Common techniques used in root cause analysis include 5 Whys, Fishbone Diagram, and Fault Tree Analysis.
Example: If a product is consistently failing quality checks, root cause analysis...read more
Q16. How many months will take TL Ss completion. Bla bla bla.......
The completion of TL Ss will take approximately 6 months.
The completion of TL Ss typically takes around 6 months.
Factors such as project complexity, team size, and resources available can impact the timeline.
For example, a smaller project with a highly skilled team may be completed in less than 6 months, while a larger project with limited resources may take longer.
Q17. Power Transmission line how many gangs do you have in your hand.
As Chief Manager, I oversee multiple power transmission lines and manage various gangs responsible for maintenance and operations.
I have multiple gangs under my supervision, each assigned to different sections of the power transmission line.
Each gang is responsible for specific tasks such as maintenance, repair, and inspection of the transmission line.
Examples of gangs include line crews, tower climbers, and maintenance technicians.
I work closely with each gang to ensure effi...read more
Q18. What's one safety improvement you'd make?
Implementing a behavior-based safety program to encourage safe practices among employees.
Introduce regular safety training sessions for all employees.
Establish a system for reporting near misses and potential hazards.
Reward employees for demonstrating safe behaviors.
Conduct safety audits to identify areas for improvement.
Q19. What about welding process?
Welding process involves joining two or more metal pieces together using heat and/or pressure.
Welding is a common manufacturing process used in various industries such as automotive, construction, and aerospace.
Different types of welding techniques include MIG welding, TIG welding, and arc welding.
Quality assurance in welding involves ensuring proper weld penetration, strength, and appearance.
Non-destructive testing methods like ultrasonic testing and X-ray inspection are use...read more
Q20. What is ISO? Please explain.
ISO stands for International Organization for Standardization. It is a global body that develops and publishes international standards.
ISO develops and publishes international standards to ensure quality, safety, and efficiency in products, services, and systems.
ISO standards cover various industries such as technology, healthcare, food safety, and environmental management.
ISO certification demonstrates that a company meets the requirements of specific ISO standards, enhancin...read more
Q21. What is Unsafe act and conditions.
Unsafe act and conditions refer to behaviors and situations that can lead to accidents or injuries in the workplace.
Unsafe act refers to actions taken by individuals that can result in accidents, such as not wearing proper safety gear or taking shortcuts.
Unsafe conditions are physical aspects of the work environment that increase the likelihood of accidents, such as slippery floors or faulty equipment.
Examples of unsafe acts include not following safety procedures, horseplay ...read more
Q22. What is safety
Safety is the state of being protected from harm, danger, or injury.
Safety refers to the measures taken to prevent accidents, injuries, and hazards.
It involves identifying and assessing potential risks and implementing strategies to mitigate them.
Safety includes following protocols, guidelines, and regulations to ensure a secure environment.
Examples of safety measures include wearing personal protective equipment, conducting safety inspections, and providing training on emerg...read more
Q23. What remuneration do you expect?
I expect a competitive salary commensurate with my experience and skills.
I am looking for a salary that reflects the responsibilities of the Deputy Manager Commercial role.
I have researched the average salary range for similar positions in the industry.
I am open to negotiation based on the overall compensation package offered.
I value opportunities for growth and development in addition to monetary compensation.
Q24. How to do slump test
Slump test is a method to measure the workability of concrete by observing the consistency and flow of the concrete mix.
Prepare a slump cone by lubricating the inside surface and placing it on a smooth, flat surface.
Fill the cone with concrete in three layers, each layer tamped with a rod 25 times.
Remove excess concrete, level the top, and lift the cone vertically. Measure the slump of the concrete.
Record the slump measurement in millimeters and interpret the results based on...read more
Q25. RCC foundation Design Steps
RCC foundation design involves several steps to ensure structural stability and durability.
1. Determine the type of foundation needed based on soil conditions and building requirements.
2. Calculate the loads and stresses the foundation will need to support.
3. Design the dimensions and reinforcement of the foundation based on structural analysis.
4. Consider factors such as settlement, lateral stability, and waterproofing in the design.
5. Prepare detailed drawings and specifica...read more
Top HR Questions asked in Jay Ambe International School
Interview Process at Jay Ambe International School
Top Interview Questions from Similar Companies
Reviews
Interviews
Salaries
Users/Month