Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Toyota Kirloskar Motor QC Inspector Interview Questions and Answers

Updated 29 Jul 2024

Toyota Kirloskar Motor QC Inspector Interview Experiences

1 interview found

QC Inspector Interview Questions & Answers

user image Anonymous

posted on 29 Jul 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is volumes
  • Ans. 

    Volumes refer to the amount of space occupied by a three-dimensional object or substance.

    • Volumes are typically measured in cubic units such as cubic meters or cubic feet.

    • For example, the volume of a cube can be calculated by multiplying the length, width, and height of the cube.

    • In the context of liquids, volume can refer to the amount of fluid that a container can hold.

  • Answered by AI
  • Q2. What is voltage ⚡
  • Ans. 

    Voltage is the difference in electric potential between two points in a circuit, measured in volts.

    • Voltage is the force that pushes electric current through a circuit.

    • It is measured in volts (V).

    • Higher voltage means more potential energy for electrons to flow.

    • Voltage can be DC (direct current) or AC (alternating current).

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - No idea

Interview questions from similar companies

I applied via Walk-in and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(6 Questions)

  • Q1. Ask about qc question
  • Q2. Only qc question asking
  • Q3. Law of thermodynamics
  • Ans. 

    The laws that govern energy and its transformations in a system.

    • There are three laws of thermodynamics.

    • The first law states that energy cannot be created or destroyed, only transferred or converted.

    • The second law states that the total entropy of a closed system will always increase over time.

    • The third law states that as the temperature of a system approaches absolute zero, the entropy of the system approaches a minimum...

  • Answered by AI
  • Q4. Zeroth law ,first law.secoend law,third law
  • Q5. What is surface tension
  • Ans. 

    Surface tension is the force that causes the molecules on the surface of a liquid to stick together.

    • Surface tension is caused by the attraction between the molecules on the surface of a liquid.

    • It is what allows insects to walk on water and why water forms droplets on a surface.

    • Surface tension can be affected by temperature, pressure, and the presence of other substances in the liquid.

    • It is measured in units of force pe...

  • Answered by AI
  • Q6. Force depends on surface is call surface tension

Interview Preparation Tips

Topics to prepare for Tata Motors QC Inspector interview:
  • Automobile
  • Tom
  • Md
Interview preparation tips for other job seekers - This is a average plate from all of us good skill ,great communication.team work

I was interviewed in Jun 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Waiting for CEO appointment

Skills: Knowledge About Industries, Ability To Handle Situations

I was interviewed before Sep 2016.

Interview Questionnaire 

3 Questions

  • Q1. About myself and Job experiance share ?
  • Q2. What kind of vehicle issues work ?
  • Ans. 

    Various vehicle issues can be identified and addressed through quality inspection.

    • Mechanical problems such as engine malfunctions or transmission issues

    • Electrical issues like faulty wiring or malfunctioning sensors

    • Structural defects such as frame damage or body panel misalignment

    • Safety concerns like brake failures or airbag malfunctions

    • Cosmetic flaws including paint imperfections or scratches

    • Functional problems like ma

  • Answered by AI
  • Q3. What is the measure issues of the body of vehicle?
  • Ans. 

    The measure issues of the body of a vehicle include structural integrity, fit and finish, and overall aesthetics.

    • Structural integrity refers to the strength and stability of the vehicle's body, ensuring it can withstand impacts and provide safety to occupants.

    • Fit and finish involves checking for proper alignment of body panels, doors, and windows, ensuring they are flush and operate smoothly.

    • Aesthetics encompass the vi...

  • Answered by AI

Interview Preparation Tips

Round: HR Interview
Experience: Its comfortable and satisfied.

Round: Resume Shortlist
Experience: Its fine.

Round: Technical Interview
Experience: Its fine

I was interviewed before Jun 2016.

Interview Questionnaire 

1 Question

  • Q1.  Why Mechanical Engineering?
  • Ans. 

    I chose Mechanical Engineering because of my passion for designing and building machines that improve people's lives.

    • Fascination with how things work and desire to create innovative solutions

    • Interest in applying principles of physics and mathematics to real-world problems

    • Enjoyment of hands-on work and building physical prototypes

    • Desire to contribute to advancements in technology and industry

    • Examples: designing more eff...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Online. Related to courses of Design, MOS, TOM. Tough MCQ

Manager Interview Questions & Answers

Tata Motors user image anurag mishra

posted on 12 Jan 2015

Interview Questionnaire 

3 Questions

  • Q1. Tell me about youself
  • Ans. 

    I am a highly motivated and experienced manager with a proven track record of success.

    • I have over 10 years of experience in managing teams and projects

    • I am skilled in strategic planning and problem-solving

    • I have a strong focus on achieving results and meeting targets

    • I am an excellent communicator and team player

    • I am constantly seeking to improve my skills and knowledge

  • Answered by AI
  • Q2. Asked a few questions related to my m-tech project and it's application
  • Q3. Tell me your favourite subjects
  • Ans. 

    My favorite subjects are mathematics, computer science, and economics.

    • I enjoy solving complex problems in mathematics

    • I find computer science fascinating and enjoy programming

    • I am interested in economics and how it affects the world

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Cut-off was on the pointer basis for Tata. It was 6.0 Only

Round: Test
Experience: QUESTIONS WERE SIMPLE BUT TIME MANAGEMENT IS VERY IMPORTANT. YOU HAVE TO GIVE THE ANSWERS IN A SINGLE SHOT.THERE WAS NO RETURN OR GO BACK OPTION. ONCE PASSED THE QUESTION, YOU CAN'T VIEW IT AGAIN. SO BE CAREFUL WHILE GIVING THE ANSWERS.
Tips: Time ManagementProper practice of the sections mentioned above
Cut-Off will be high because od moderate level of questions

Round: Group Discussion
Experience: It is one of the challenging round,because you have to show your talent to speak confidently and politely, listen curiously and show your leadership skills to gauge the results in a concluding remark.
I have spoken only for 30-40 seconds after 8 minutes in 10 minutes GD but i have given a new dimension and guided the GD in a appropriate direction so got selected.
Tips: Must work on communication skills. 
Quality of content is very important not the quantity.Your thoughts should be clear and audible.Try to take the initiative and to summarize the GD.

Round: Interview
Experience: Panel was very supportive and they will try to make you as comfortable as possible.
Tips: Make a honest self-analysis and try to sell yourself in the best way possible as per the need of the interviewer and the post for which they are looking the people.

Round: Interview
Experience: It was nice.I have seen them my full detailed phase1 report and explained them, in the best possible way.
Tips: Do your project sincerely take a few subjects and prepare them in the best possible way.
They will definitely ask about your favorite subjects and ask very basic questions and major practical applications.

Round: Interview
Experience: i have told IC engines. So they asked me how can you increase the power of the IC engines without doing any major modifications in the engine just by using design of it?
Tips: Your approach is very much important than your correct answer. So give the proper logic behind your answer.Try to be cool, calm and confident even in the worst situations.So many times,they intentional try to puzzle you and observe your approach & reaction.

General Tips: Be confident. It is the one thing without which having all you can't sail out the competition.
Prepare common HR questions honestly like- tell me about yourself?
Why we should hire you and where do you see yourself after 5 years?
Be confident in GD.If not then take some mock GD with friends.
Skill Tips: Your body language and soft-skills matters a lot. So please try to work on it sincerely.
Be honest in the interview. Prepare your projects and industrial training sincerely.Tell them, why they should take you?
Sell yourself in the best way possible. Try to take the control of the interview in your hands and bring them in those areas where you are really strong and talk in those areas as much as possible.
College Name: IIT Guwahati
Motivation: Great place to work and learn especially in R&D.
Automobile world,one of my favorite areas of interest.
Work-life balance and nice location like Pune, Lucknow.
Social initiatives to make a large impact for social-welfare.
Funny Moments: My interview has gone just for 10 minutes.I was successful to make a good 1st impression. They have asked only a few questions and honestly telling i was not able to tell them accurately and they said ok' now you can go.
I thought i am completely out of the game because my colleagues interviews have gone much longer.I was waiting outside of my biggest failure but was shocked to listen my name 4th in the list of 8 people.
The best moment of my life i got selected in my dream company with my best friend..............:)
partyyyyyyyyyyyyyy,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
All the best

I applied via Referral and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. What is the best attitude as an Engineer?

Interview Preparation Tips

Interview preparation tips for other job seekers - Great.

Interview Questionnaire 

3 Questions

  • Q1. 7qc tool
  • Q2. How to use vernier caliper
  • Ans. 

    A vernier caliper is a measuring tool used to accurately measure the dimensions of an object.

    • Ensure the caliper is clean and zeroed before use

    • Open the jaws and place the object between them

    • Close the jaws gently until they touch the object

    • Read the main scale value aligned with the zero mark on the vernier scale

    • Read the vernier scale value that aligns with a mark on the main scale

    • Add the main scale and vernier scale read...

  • Answered by AI
  • Q3. How respect ur senior staff And junior associate
  • Ans. 

    I show respect to senior staff by listening to their advice and guidance, and I treat junior associates with patience and support.

    • Listen actively to senior staff members' advice and guidance

    • Acknowledge and appreciate the experience and knowledge of senior staff

    • Provide support and guidance to junior associates

    • Encourage open communication and collaboration among team members

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Pass
Duration: 1 hour
Total Questions: 10

Round: Test
Experience: Pass
Duration: 1 hour
Total Questions: 10

Round: HR Interview
Experience: Pass

Round: Technical Interview
Experience: Pass

Round: Behavioural Interview
Experience: Pass

I applied via Recruitment Consulltant and was interviewed before Apr 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. IC engines, testing and development
Round 3 - HR 

(1 Question)

  • Q1. Salary, shifting to jaipur

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't go for this company if you have any other option. You will spoil you career.

I applied via Naukri.com and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. The interview went good and they asked about project and few technical stuff and process related

Interview Preparation Tips

Interview preparation tips for other job seekers - Please ensure you are good at protocols and standards
Contribute & help others!
anonymous
You can choose to be anonymous

Toyota Kirloskar Motor Interview FAQs

How many rounds are there in Toyota Kirloskar Motor QC Inspector interview?
Toyota Kirloskar Motor interview process usually has 1 rounds. The most common rounds in the Toyota Kirloskar Motor interview process are Technical.
What are the top questions asked in Toyota Kirloskar Motor QC Inspector interview?

Some of the top questions asked at the Toyota Kirloskar Motor QC Inspector interview -

  1. What is volu...read more
  2. What is voltage ...read more

Recently Viewed

REVIEWS

Macleods Pharmaceuticals

No Reviews

REVIEWS

Toyota Kirloskar Motor

No Reviews

REVIEWS

Toyota Kirloskar Motor

No Reviews

REVIEWS

Macleods Pharmaceuticals

No Reviews

JOBS

University of Cambridge

No Jobs

SALARIES

TVS Motor

COMPANY BENEFITS

Intas Pharmaceuticals

No Benefits

SALARIES

TVS Motor

REVIEWS

Macleods Pharmaceuticals

No Reviews

REVIEWS

TVS Motor

No Reviews

Tell us how to improve this page.

Toyota Kirloskar Motor QC Inspector Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

BigBasket

We don't just offer jobs; we offer peace of mind.

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 1k Interviews
Maruti Suzuki Interview Questions
4.2
 • 590 Interviews
Hero MotoCorp Interview Questions
4.1
 • 335 Interviews
TVS Motor Interview Questions
4.0
 • 315 Interviews
Bajaj Auto Interview Questions
3.9
 • 267 Interviews
Ashok Leyland Interview Questions
4.1
 • 240 Interviews
View all

Toyota Kirloskar Motor QC Inspector Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Senior Officer
150 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Technician
139 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Team Lead
139 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
135 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
99 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Toyota Kirloskar Motor with

Maruti Suzuki

4.2
Compare

Hyundai Motor India Limited

4.3
Compare

Honda Cars

4.4
Compare

Mahindra & Mahindra

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview