i
TITAGARH WAGONS
Filter interviews by
Clear (1)
I applied via Naukri.com and was interviewed before Oct 2022. There were 4 interview rounds.
Fabrication area safety measures.
Top trending discussions
Around the construction site
Chimney installation
Electrical hazard
Height work Safety
HIRA , JSA
Chimney installation
I applied via Naukri.com and was interviewed in Oct 2023. There was 1 interview round.
I applied via Naukri.com and was interviewed before Dec 2021. There were 2 interview rounds.
The preparation of hazard identification and assessment of risk and opportunity is a crucial task for a Safety Officer.
Start by conducting a thorough hazard identification process to identify potential risks and hazards in the workplace.
Assess the identified hazards by evaluating the likelihood and severity of each risk.
Use various risk assessment techniques such as risk matrices, fault tree analysis, or bowtie analysi...
Power plants have hazards such as electrical, chemical, thermal, and radiological hazards.
Electrical hazards include electrocution, arc flashes, and electrical burns.
Chemical hazards include exposure to toxic chemicals and gases.
Thermal hazards include burns and heat stress.
Radiological hazards include exposure to ionizing radiation.
Other hazards include fire, explosion, and mechanical hazards.
Examples of power plants ...
I applied via Company Website and was interviewed in Feb 2023. There were 3 interview rounds.
As a Safety Officer, I carry a range of safety equipment including a first aid kit, fire extinguisher, safety vest, and hard hat.
First aid kit for emergency medical situations
Fire extinguisher for fire emergencies
Safety vest for visibility and identification
Hard hat for head protection
Working at height safety involves measures to prevent falls and injuries when working at elevated levels.
Employers must conduct risk assessments and provide appropriate safety equipment and training.
Workers must use the provided safety equipment and follow safe work procedures.
Examples of safety equipment include harnesses, guardrails, and safety nets.
The standard also includes requirements for inspection and maintenan...
I would immediately stop the work and assess the situation to determine the necessary safety equipment and documents.
Stop the work immediately to prevent any potential hazards or accidents.
Assess the situation to determine the necessary safety equipment and documents.
Obtain the required safety equipment and documents before resuming work.
Communicate the importance of safety equipment and documents to all team members t
The hazards in oil and gas field include fire, explosion, toxic gas exposure, falls, and equipment failure.
Fire and explosion risks due to the presence of flammable materials
Toxic gas exposure from leaks or releases
Falls from heights during drilling or maintenance activities
Equipment failure due to high pressure or temperature
Environmental hazards such as oil spills or gas leaks
Human error or negligence leading to acci
Safety equipment and working procedures are essential for preventing accidents and injuries in the workplace.
Safety equipment includes personal protective equipment (PPE) such as hard hats, safety glasses, gloves, and safety shoes.
Working procedures involve following established protocols for tasks such as lockout/tagout, confined space entry, and working at heights.
Regular safety training and communication are also im...
JSA and risk assessment involve identifying hazards, evaluating risks, and implementing controls.
Identify the job or task to be analyzed
Break down the job into steps
Identify potential hazards for each step
Evaluate the risks associated with each hazard
Implement controls to eliminate or reduce the risks
Review and update the JSA and risk assessment regularly
Before starting work at height, I check...
The condition of the equipment to be used
The stability of the work surface
The weather conditions
The availability and proper use of personal protective equipment
The presence of a rescue plan
The competency of the workers involved
The communication system in place
The adherence to safety regulations and procedures
Basic PPEs are essential for plant safety. They include hard hats, safety glasses, earplugs, gloves, and safety shoes.
Hard hats protect the head from falling objects and impacts.
Safety glasses protect the eyes from flying debris and harmful substances.
Earplugs protect the ears from loud noises and prevent hearing loss.
Gloves protect the hands from cuts, burns, and chemical exposure.
Safety shoes protect the feet from fa...
I applied via Naukri.com and was interviewed in Dec 2022. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Oct 2023. There were 3 interview rounds.
Key safety points of boilers include proper maintenance, regular inspections, and adherence to safety protocols.
Regular maintenance to prevent leaks and malfunctions
Proper ventilation to avoid carbon monoxide buildup
Adherence to safety protocols such as wearing protective gear and following operating procedures
Regular inspections to identify potential hazards and address them promptly
There are mainly two types of boilers: fire tube boilers and water tube boilers.
Fire tube boilers have hot gases passing through the tubes which are surrounded by water.
Water tube boilers have water flowing inside the tubes while hot gases surround them.
Examples include steam boilers, hot water boilers, and industrial boilers.
I applied via Naukri.com and was interviewed in Jun 2023. There were 2 interview rounds.
Control measures are actions taken to eliminate or reduce hazards and risks in order to ensure safety.
Engineering controls: Physical modifications to eliminate or minimize hazards (e.g. machine guards, ventilation systems)
Administrative controls: Policies, procedures, and training to reduce exposure to hazards (e.g. safety training, work permits)
Personal protective equipment (PPE): Equipment worn to protect against spe...
Checklist for lifting plan includes assessing load weight, selecting appropriate lifting equipment, ensuring proper rigging, and conducting pre-lift inspections.
Assess the weight of the load to determine the appropriate lifting equipment and techniques.
Select the appropriate lifting equipment based on the load weight and characteristics.
Ensure proper rigging by inspecting and using appropriate slings, hooks, and attach...
A load chart is a graphical representation of the safe working load limits of a crane or lifting equipment.
A load chart provides information about the maximum weight that can be safely lifted at different boom lengths and angles.
It helps operators determine the safe working limits of the equipment.
Load charts are specific to each type and model of crane or lifting equipment.
They take into account factors such as boom l...
Hierarchy of Control measures refers to a systematic approach to eliminate or minimize hazards in the workplace.
Elimination: Remove the hazard completely, e.g. replacing a hazardous substance with a safer alternative.
Substitution: Replace the hazard with a less hazardous alternative, e.g. using non-toxic chemicals instead of toxic ones.
Engineering controls: Implement physical changes to the workplace to reduce exposure...
Emergency exit is a designated route for evacuating a building during an emergency. Emergency assembly point is a predetermined location where individuals gather after evacuating.
Emergency exit is a route that allows people to quickly and safely leave a building during emergencies such as fires, earthquakes, or other hazards.
Emergency exits are typically marked with signs and are strategically placed throughout a build...
I applied via Other and was interviewed in Dec 2021. There was 1 interview round.
The question is unclear and seems to be unrelated to the HSE Officer role.
The term 'grabitesinal' is not a recognized term in the field of health and safety.
It is possible that the interviewer misspoke or meant to ask a different question.
As an HSE Officer, my focus is on identifying and mitigating workplace hazards to ensure the safety of employees.
I am well-versed in regulations and best practices related to occupati...
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Assistant Manager
26
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
25
salaries
| ₹0 L/yr - ₹0 L/yr |
Design Engineer
20
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
19
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Executive
17
salaries
| ₹0 L/yr - ₹0 L/yr |
Texmaco Rail and Engineering
BEML
Kalindee Rail Nirman (E)
Cimmco