40+ Plaza Premium Lounge Interview Questions and Answers

Common welding defects include porosity, undercutting, and lack of fusion. Acceptance criteria vary based on the type of defect.

• Porosity: voids or gas pockets in the weld. Acceptance criteria depend on the size and location of the porosity.

• Undercutting: groove in the base metal near the weld. Acceptance criteria depend on the depth and length of the undercut.

• Lack of fusion: incomplete bonding between the weld and base metal. Acceptance criteria depend on the size and location...read more

Hydrotest is a process of testing the strength and integrity of a pressure vessel or pipeline.

• Hydrotest involves filling the vessel or pipeline with water and pressurizing it to a specified level.

• The pressure is held for a specified duration to ensure there are no leaks or failures.

• Air volume calculation is used to determine the amount of air needed to pressurize the vessel or pipeline.

• The formula for air volume calculation is V = (P1 x V1) / P2, where V is the volume of air ...read more

The longest pipeline route in India is the 1,397 km long Mundra-Pathanamthitta pipeline. The longest pipeline in the world is the Druzhba pipeline.

• The Mundra-Pathanamthitta pipeline is used to transport crude oil from Gujarat to Kerala.

• The Druzhba pipeline is a network of pipelines that runs from Russia to several European countries.

• The Druzhba pipeline is approximately 4,000 km long.

• Other long pipelines in India include the Paradip-Haldia-Durgapur pipeline and the Salaya-Mat...read more

Seam pipe has a welded seam while seamless pipe is made without any seam. CGD uses seamless pipes for better safety and efficiency.

• Seam pipes have a welded seam while seamless pipes are made without any seam.

• Seam pipes are cheaper than seamless pipes.

• Seamless pipes are stronger and more reliable than seam pipes.

• CGD (City Gas Distribution) uses seamless pipes for better safety and efficiency.

• Seamless pipes are used in high-pressure applications such as oil and gas pipelines, p...read more

Various grades of steel pipe are used in CGD (City Gas Distribution).

• Different grades of steel pipe are used in CGD based on factors like pressure rating, temperature, and application requirements.

• Common grades of steel pipe used in CGD include API 5L Grade B, ASTM A106 Grade B, and ASTM A333 Grade 6.

• Higher grades of steel pipe may be used for high-pressure applications or in corrosive environments.

• The selection of steel pipe grades in CGD depends on factors like pipeline des...read more

The type of welding and electrode used depends on the specific application and materials being joined.

• Common types of welding include arc welding, MIG welding, TIG welding, and spot welding.

• The choice of welding method depends on factors such as the type of metal, thickness, and desired weld quality.

• For example, arc welding often uses electrodes made of materials like carbon steel, stainless steel, or cast iron.

• MIG welding typically uses a consumable electrode wire made of th...read more

A dead weight tester is a device used to calibrate pressure gauges by applying known weights to a piston.

• Consists of a piston-cylinder assembly and a set of calibrated weights

• Weights are placed on the piston to generate a known pressure

• Pressure generated is compared to the reading on the gauge being calibrated

• Used for high-precision calibration of pressure gauges

• Commonly used in industries such as oil and gas, aerospace, and manufacturing

District Regulating Skid instruments include pressure gauges, flow meters, control valves, and temperature sensors.

• Pressure gauges are used to measure the pressure of the fluid in the skid.

• Flow meters are used to measure the flow rate of the fluid passing through the skid.

• Control valves are used to regulate the flow or pressure of the fluid.

• Temperature sensors are used to measure the temperature of the fluid in the skid.

WPS is Welding Procedure Specification, PQR is Procedure Qualification Record, WQT is Welder Qualification Test, EQT is Equipment Qualification Test.

• WPS is a document that outlines the welding process to be used for a specific job.

• PQR is a record of the welding parameters used during a test weld.

• WQT is a test that certifies a welder's ability to perform a specific type of welding.

• EQT is a test that certifies the equipment used for welding meets certain standards.

TCP is a protocol that provides reliable, ordered, and error-checked delivery of data between applications.

• TCP stands for Transmission Control Protocol.

• It is a connection-oriented protocol that operates at the transport layer of the OSI model.

• TCP provides reliable, ordered, and error-checked delivery of data between applications.

• It establishes a connection between two hosts and ensures that data is transmitted correctly and completely.

• TCP uses a three-way handshake to establi...read more

Dwell time in DPT refers to the amount of time the needle is left in the skin after injection.

• Dwell time is important for ensuring proper delivery of the vaccine.

• It is typically around 10 seconds for intradermal injections.

• For intramuscular injections, dwell time may vary depending on the specific vaccine and injection site.

• Proper training and technique are necessary to ensure accurate dwell time.

• Dwell time can affect the efficacy and safety of the vaccine.

Emergency PE pipeline damages can be handled by following proper protocols and procedures.

• Immediately isolate the damaged section of the pipeline to prevent further leakage or damage.

• Notify the relevant authorities and emergency response teams to assess the situation and provide assistance.

• Implement temporary repairs or containment measures to minimize the impact of the damage.

• Coordinate with the appropriate stakeholders, such as utility companies or contractors, to plan and ...read more

E6010 is a type of electrode used in welding that produces deep penetration and is commonly used for welding in the vertical and overhead positions.

• E6010 is a classification of welding electrode according to the American Welding Society (AWS) system.

• It is a cellulose-based electrode that provides excellent arc stability and deep penetration.

• The 'E' in E6010 stands for electrode, while the '60' indicates the tensile strength of the weld metal in thousands of pounds per square ...read more

PSP level is not a medical term. It could refer to various things depending on the context.

• PSP could refer to Progressive Supranuclear Palsy, a neurodegenerative disease that affects movement and balance.

• PSP could also refer to Paint Shop Pro, a graphics editing software.

• Without context, it is impossible to determine what PSP level means.

PE80 and PE100 are types of polyethylene pipes with different pressure ratings and material properties.

• PE80 has a minimum required strength (MRS) of 8 MPa, while PE100 has an MRS of 10 MPa.

• PE100 has better resistance to stress cracking and higher pressure rating compared to PE80.

• PE100 is typically used for higher pressure applications such as gas distribution, while PE80 is used for lower pressure applications like water supply.

• PE100 pipes are often more expensive than PE80 d...read more

To tackle the current price situation of CNG with competitors fuels, we can focus on cost-effective marketing strategies and highlighting the environmental benefits of CNG.

• Analyze the pricing strategies of competitors and adjust our pricing accordingly

• Promote the cost savings of using CNG compared to traditional fuels

• Highlight the environmental benefits of CNG to attract environmentally conscious consumers

• Offer discounts or incentives to encourage customers to switch to CNG

The contracts and procurement process involves identifying needs, selecting suppliers, negotiating contracts, and managing supplier performance.

• Identify needs and requirements

• Select potential suppliers

• Negotiate terms and conditions

• Award the contract

• Manage supplier performance

• Renew or terminate the contract as needed

I have experience in trading area analysis and CNG marketing at Torrent Gas.

• Conducted thorough analysis of trading areas to identify potential markets and customer segments

• Developed marketing strategies specifically tailored for CNG products and services

• Implemented targeted marketing campaigns to increase awareness and drive sales

• Collaborated with cross-functional teams to ensure successful execution of marketing initiatives

Yes, I am knowledgeable about engine overhauling.

• I have experience in conducting engine overhauls on various types of engines.

• I am familiar with the process of disassembling, inspecting, repairing, and reassembling engines.

• I have knowledge of the tools and equipment required for engine overhauling.

• I am aware of the importance of following manufacturer guidelines and specifications during overhauls.

Yes, I am knowledgeable about CNG dispensers.

• I have experience in maintaining and troubleshooting CNG dispensers.

• I am familiar with the safety protocols and regulations related to CNG dispensers.

• I have worked with CNG dispenser manufacturers such as Kraus, Bennett, and Gilbarco.

To increase sales in the CNG market, focus on targeted marketing campaigns, improving product visibility, offering incentives, and building strong customer relationships.

• Conduct market research to identify target audience and their needs

• Create targeted marketing campaigns to reach the identified audience

• Improve product visibility through advertising, online presence, and partnerships

• Offer incentives such as discounts, promotions, or loyalty programs to attract customers

• Build ...read more

Reinforcement detail of footing and beam is the specification of the amount and placement of steel bars in the concrete structure.

• The reinforcement detail is determined by the structural engineer based on the load and span of the structure.

• The size and spacing of the bars are specified in the design drawings.

• The bars are placed in the formwork before the concrete is poured.

• The reinforcement detail ensures the strength and stability of the structure.

• Proper detailing of reinfor...read more

We utilize a combination of digital marketing strategies, content marketing, email campaigns, and social media advertising for lead generation.

• Implementing SEO techniques to improve online visibility and attract organic traffic

• Creating engaging and informative content to capture leads' interest

• Running targeted email campaigns to nurture leads and convert them into customers

• Utilizing social media advertising to reach a wider audience and generate leads

• Regularly analyzing data ...read more

To increase sales of CNG in Ludhiana, focus on promoting benefits, expanding distribution network, and offering discounts.

• Promote benefits of using CNG such as cost savings, environmental friendliness, and better engine performance

• Expand distribution network by opening more CNG stations in strategic locations

• Offer discounts or incentives to attract more customers to switch to CNG

• Collaborate with local government and businesses to promote CNG usage

• Organize awareness campaigns ...read more

Pressure outlet and inlet GI pipes are used to regulate the flow of fluids in a system.

• Pressure outlet GI pipes are used to release fluids from a system under pressure.

• Pressure inlet GI pipes are used to introduce fluids into a system under pressure.

• GI pipes are made of galvanized iron and are commonly used in plumbing and industrial applications.

• The size and placement of pressure outlet and inlet GI pipes are important factors in designing an efficient fluid system.

Sales is the process of convincing potential customers to buy a product or service.

• Identifying potential customers

• Understanding their needs and preferences

• Presenting the product or service in a compelling way

• Overcoming objections and addressing concerns

• Closing the sale and following up with customers

• Building long-term relationships with customers

• Examples: selling cars, insurance policies, software solutions, etc.

GI pipe size refers to Galvanized Iron pipes while MDPE pipe size refers to Medium Density Polyethylene pipes.

• GI pipe size is measured in inches and ranges from 1/2 inch to 6 inches in diameter.

• MDPE pipe size is measured in millimeters and ranges from 20mm to 110mm in diameter.

• GI pipes are commonly used for water supply systems while MDPE pipes are used for gas distribution systems.

Horizontal Directional Drilling is a trenchless method of installing underground pipes, cables, and conduits.

• It involves drilling a pilot hole along a predetermined path

• A drilling rig is used to steer the drill bit and pull the pipe or cable through the hole

• It is commonly used for installing utilities under roads, rivers, and other obstacles

• It minimizes disruption to the surface and reduces the need for excavation

• Examples include laying fiber optic cables, gas pipelines, and ...read more

I add value to the chain by leveraging my extensive experience in operations management, strategic planning, and team leadership.

• I have a proven track record of improving operational efficiency and reducing costs.

• I excel at developing and implementing strategic plans to drive business growth and achieve organizational goals.

• I am skilled in building and leading high-performing teams, fostering a culture of collaboration and accountability.

• I have a strong focus on customer sati...read more

Tests for soil and concrete are essential for ensuring their quality and suitability for construction purposes.

• Soil tests include tests for moisture content, density, and bearing capacity.

• Concrete tests include tests for compressive strength, workability, and durability.

• Tests are conducted in accordance with relevant standards and codes.

• Results of tests are used to determine the suitability of soil and concrete for construction purposes.

• Regular testing is important to ensure ...read more

Customer satisfaction can be achieved by understanding their needs and providing excellent service.

• Listen actively to their concerns and needs

• Provide prompt and efficient service

• Offer personalized solutions

• Follow up to ensure their satisfaction

• Provide clear communication and transparency

• Offer incentives and rewards for loyalty

• Continuously improve and innovate to meet their changing needs

Designing of beam and slab involves determining their dimensions, reinforcement, and load-bearing capacity.

• The dimensions of the beam and slab are determined based on the span and load they need to support.

• The reinforcement required for the beam and slab is calculated based on the loads and stresses they will experience.

• The load-bearing capacity of the beam and slab is determined by analyzing the strength of the materials used and their ability to resist bending and shear for...read more

City Gas Distribution system is a network of pipelines that deliver natural gas to residential, commercial, and industrial consumers.

• City Gas Distribution system involves the transportation of natural gas through a network of pipelines.

• It delivers natural gas to various types of consumers, including residential, commercial, and industrial.

• The system includes gas processing plants, transmission pipelines, distribution pipelines, and customer connections.

• It ensures the safe and...read more

Finding new customers involves identifying target markets, networking, utilizing social media, and offering promotions.

• Identify target markets based on demographics, psychographics, and behavior

• Network with industry professionals, attend conferences, and join networking groups

• Utilize social media platforms to reach a wider audience and engage with potential customers

• Offer promotions, discounts, or incentives to attract new customers

• Collect feedback from existing customers to ...read more

The cost of belief is subjective and can vary depending on the individual's values, beliefs, and experiences.

• The cost of belief can include financial expenses, such as donations to religious organizations or costs associated with practicing a particular faith.

• It can also involve personal sacrifices, such as time spent in prayer or adhering to religious practices.

• The cost of belief may extend to social consequences, such as ostracism or discrimination for holding certain belie...read more

PNG (Portable Network Graphics) is a popular image format commonly used in industries and commercial settings.

• PNG files support transparent backgrounds, making them ideal for logos and graphics on websites.

• They use lossless compression, preserving image quality while reducing file size.

• PNG files are widely used in industries such as graphic design, web development, and printing.

• Commercial applications include advertising, product packaging, and digital signage.

Industrial gas price is determined by factors such as supply and demand, production costs, and market competition. Calorific value refers to the amount of heat released during combustion.

• Industrial gas prices are influenced by factors like supply and demand dynamics in the market.

• Production costs, including raw materials and labor, play a significant role in determining the price of industrial gases.

• Market competition among suppliers can also impact the pricing of industrial ...read more

Customers benefit from the company's products or services in various ways.

• Improved productivity and efficiency

• Cost savings

• Enhanced customer experience

• Increased revenue and profits

• Access to new markets and opportunities

• Innovative solutions to meet their needs

• Stronger brand reputation and loyalty

Soil can be classified based on its texture, structure, and composition.

• Soil texture is determined by the size of its particles - sand, silt, or clay.

• Soil structure refers to the way the particles are arranged - granular, blocky, or platy.

• Soil composition is based on the amount of organic matter, minerals, and nutrients present.

• Other classifications include soil color, pH level, and water-holding capacity.

• Examples of soil types include sandy loam, clayey silt, and peaty soil.

Account entries are financial transactions recorded in the general ledger.

• Account entries are used to record the inflow and outflow of money in an organization.

• They include debits and credits to various accounts.

• Examples of account entries include recording sales revenue, expenses, and asset purchases.

• Account entries must follow the double-entry bookkeeping system, where every debit entry must have a corresponding credit entry.

• These entries are crucial for financial reporting...read more

Value addition to current practices involves identifying areas for improvement and implementing strategies to enhance performance and customer satisfaction.

• Analyze current marketing practices to identify strengths and weaknesses

• Research and implement new marketing techniques and technologies

• Develop and execute innovative marketing campaigns

• Improve customer targeting and segmentation

• Enhance customer experience through personalized marketing strategies

• Optimize marketing budget ...read more

PMU stands for Power Management Unit.

• PMU is an electrical panel that is responsible for managing and controlling the power supply in a system.

• It ensures the proper distribution of power to various components and protects them from electrical faults.

• PMU panels are commonly used in industrial and commercial buildings, data centers, and power plants.

• They monitor voltage, current, and frequency levels and can automatically switch to backup power sources in case of an outage.

• PMU p...read more

The technical aspects of the job involve overseeing the implementation of new technologies, troubleshooting technical issues, and ensuring compliance with industry standards.

• Implementing new technologies to improve efficiency and productivity

• Troubleshooting technical issues to minimize downtime

• Ensuring compliance with industry standards and regulations

• Collaborating with IT teams to optimize systems and processes