Upload Button Icon Add office photos

Filter interviews by

The India Thermit Corporation Civil Engineer-Highway/Roadway Interview Questions, Process, and Tips

Updated 13 Nov 2020

The India Thermit Corporation Civil Engineer-Highway/Roadway Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed in Oct 2020. There were 4 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. 1-length on one rail. 2-types of rail in india 3- ductility of bitumens. 4-how many sleepers in 13m rail. 5-which load are carrying on the rail when train running.
  • Ans. 

    Questions related to railway engineering including rail length, types, bitumen ductility, sleepers, and load carrying capacity.

    • The length of one rail is typically around 13 meters.

    • There are several types of rails used in India including 60kg, 52kg, and 90R.

    • Bitumen is a highly ductile material commonly used in road construction.

    • There are approximately 26 sleepers in a 13m rail.

    • Rails carry various loads when trains are r...

  • Answered by AI
  • Q2. What is function of sleepers
  • Ans. 

    Sleepers are structural elements used in railway tracks to support the rails and distribute the load.

    • Sleepers provide stability and alignment to the railway tracks.

    • They help in distributing the load from the trains to the underlying ballast.

    • Sleepers also help in maintaining the gauge of the tracks.

    • They absorb vibrations and reduce noise generated by the trains.

    • Common types of sleepers include wooden, concrete, and stee

  • Answered by AI
  • Q3. Load distributed system of rail ?
  • Ans. 

    A load distributed system of rail is a system where the weight of the train is spread out over multiple axles.

    • The weight of the train is distributed over multiple axles to prevent damage to the tracks.

    • This system is commonly used in heavy haul rail transport.

    • The load distribution is achieved through the use of bogies, which are sets of wheels that are attached to a frame.

    • The bogies allow the weight of the train to be s...

  • Answered by AI
  • Q4. What is expensive gap ?
  • Ans. 

    Expensive gap refers to the difference in cost between the lowest and highest bids for a construction project.

    • It is a common occurrence in the bidding process for construction projects.

    • The gap can be significant and can impact the decision-making process for awarding the contract.

    • Factors that can contribute to an expensive gap include market conditions, project complexity, and contractor availability.

    • For example, if th...

  • Answered by AI
  • Q5. Diffrence between tounge rail and stock rail
  • Ans. 

    Tongue rail is a movable rail that guides the wheel flanges of a train, while stock rail is a fixed rail that supports the weight of the train.

    • Tongue rail is also known as switch rail or point rail.

    • Stock rail is also known as running rail or mainline rail.

    • Tongue rail is usually shorter than stock rail.

    • Tongue rail is designed to move and guide the train onto the desired track, while stock rail supports the weight of the...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - does’t means if you are not rply of four answer in 5 question. important things is your confidence level and dont divert and irritate by question. and also intrduction should be unique with enfluent english.

Interview questions from similar companies

Intern Interview Questions & Answers

ABB user image Anonymous

posted on 15 Sep 2022

I applied via LinkedIn and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Conversation about my experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare your CV as a speech, investigate about the company.

I applied via Naukri.com and was interviewed in Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Fast company work experience & my self introduction, personal skills etc
  • Q2. How to feel working in fast company

Interview Preparation Tips

Interview preparation tips for other job seekers - It's something good

Intern Interview Questions & Answers

Thermax Limited user image Shubhechya Sarkar

posted on 22 Aug 2017

I appeared for an interview in Jan 2017.

Interview Questionnaire 

3 Questions

  • Q1. Tell us about yourself.
  • Ans. 

    I am a recent graduate with a degree in Computer Science and a passion for coding and problem-solving.

    • Recent graduate with a degree in Computer Science

    • Passionate about coding and problem-solving

    • Strong communication and teamwork skills

  • Answered by AI
  • Q2. Tell us about your involvement in sports and your activities.
  • Ans. 

    I have been actively involved in sports since childhood, participating in various team sports and individual activities.

    • Played soccer for 10 years, competing at a regional level

    • Participated in track and field events in high school, specializing in long jump and hurdles

    • Currently enjoy hiking and rock climbing in my free time

  • Answered by AI
  • Q3. Discussion of company policies about side income and startups.

Interview Preparation Tips

Round: Test
Experience: It was pretty easy and generic. Not much related to my branch i.e. Chemical Engineering. Out of 24, 6 were selected for the next round.
Duration: 1 hour 30 minutes

Round: Group Discussion
Experience: 6 of us were given the choice between 2 topics: online shopping vs. Conventional shopping, and the success of swachh bharat. We selected the prior one after a discussion of 1 minute. We were given 3 minutes to brainstorm and 12 minutes to speak, so 12+3 = 15 minutes total. The mediators, that is the HR lady and the technical gentleman, just listened, did not interfere in our discussions.
Tips: Like any GD, it's crucial to demonstrate leadership without being patronising. And to dominate without being disrespectful to others. While it's ok not to take a rigid stance in a GD, it certainly gets you bonus points if you can convince the other person and "bring them to your side". It's not a debate, so even if you argue, you have to come to a more-or-less unanimous conclusion within the set time so your discussion must have a set direction. Bonus points if you're the one giving the direction.
Duration: 15 minutes

Round: HR Interview
Experience: It was for about 10-15 minutes. The HR lady and the tech gentleman were very chill. They began by asking me about myself. I have a startup of my own so I gave a short intro about myself, my immediate family, my goals and then into my startup. They had gone through my CV so they started asking about my activities in college and what I was doing. I think they were trying to figure out my character and if all of it was genuine. Then I again started talking about my startup, so they finally relented and asked me about it. I explained the idea to them and told them that I would want to continue working on my startup. They told me that it was not in accordance with their company's policy to have an employee occupied full-time in two companies. Then I informed them that my startup was my priority, and we agreed that I would not be a good fit for Thermax.
Tips: Be confident, cool and open during the interview. You are already good if you've progressed to the last stage of the selection process. The interviewer already knows you have flair. What they want to figure out is that whether you are the right fit for their company's culture. If you're not, no matter how good you are, they will not select you. And that's ok.

I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Maintenance phylosophy
  • Ans. Depends on equipment running hour, criticality, availability and standby.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Thermax Limited Senior Engineer interview:
  • Boe
  • Energy manager
Interview preparation tips for other job seekers - Be confidential and technically strong.

I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. All were professional questions wrt to their department

Interview Preparation Tips

Interview preparation tips for other job seekers - It was an virtual interview, with panel board members, they test our professional standard and expect honest answers.
Round 1 - Technical 

(1 Question)

  • Q1. Basic electric questions and PLC programming
Round 2 - Technical 

(1 Question)

  • Q1. Based on your project

Interview Preparation Tips

Interview preparation tips for other job seekers - More question will be on your project for experience people

I applied via Company Website and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Regarding about Assembly knowledge
  • Q2. Personal round from HR

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be updated and we'll known from technical.

I applied via Naukri.com and was interviewed in Jul 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 
Round 3 - One-on-one 
Round 4 - HR 

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident, most of the Questions based on past experience
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About your past experience
Round 3 - HR 

(1 Question)

  • Q1. About your past salary

The India Thermit Corporation Interview FAQs

What are the top questions asked in The India Thermit Corporation Civil Engineer-Highway/Roadway interview?

Some of the top questions asked at the The India Thermit Corporation Civil Engineer-Highway/Roadway interview -

  1. 1-length on one rail. 2-types of rail in india 3- ductility of bitumens. 4-how ...read more
  2. diffrence between tounge rail and stock r...read more
  3. load distributed system of rai...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 260 Interviews
ABB Interview Questions
4.1
 • 242 Interviews
Timken Interview Questions
4.0
 • 48 Interviews
Lohia Group Interview Questions
3.7
 • 46 Interviews
View all
Executive Accountant
10 salaries
unlock blur

₹1.8 L/yr - ₹4.5 L/yr

Production Engineer
8 salaries
unlock blur

₹2.4 L/yr - ₹3.3 L/yr

Maintenance Engineer
8 salaries
unlock blur

₹3.6 L/yr - ₹6.5 L/yr

Site Incharge
7 salaries
unlock blur

₹1.9 L/yr - ₹4.2 L/yr

Data Entry Operator
7 salaries
unlock blur

₹2 L/yr - ₹3.2 L/yr

Explore more salaries
Compare The India Thermit Corporation with

Thermax Limited

4.1
Compare

ABB

4.1
Compare

Isgec Heavy Engineering

3.8
Compare

Kirloskar Oil Engines

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview