Upload Button Icon Add office photos

TechnipFMC

Compare button icon Compare button icon Compare

Filter interviews by

TechnipFMC Senior Engineer Mechanical Interview Questions and Answers

Updated 17 Sep 2022

TechnipFMC Senior Engineer Mechanical Interview Experiences

1 interview found

I applied via Recruitment Consulltant and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Mostly about your current job profile
Round 3 - Technical 

(1 Question)

  • Q1. Job profile and your attitude towards new role
  • Ans. 

    I am excited about the job profile and eager to take on new responsibilities.

    • I have a strong background in mechanical engineering and extensive experience in senior roles.

    • I am confident in my ability to handle the challenges and complexities of the new role.

    • I am always open to learning and adapting to new technologies and methodologies.

    • I have successfully transitioned into new roles in the past and have consistently de...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Explain your current roles and responsibilities in details and show positive attitude towards new challenges and responsibilities.

Interview questions from similar companies

I applied via Referral and was interviewed in Jul 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Basic questions asked about the packages handled in Petrofac.
  • Q2. Just give straight replies which you are confident with and do not get trapped in cooked replies if one is not sure about the answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Just give straight replies which you are confident about. And do not get trapped in cooked replies if one is not confident enough to defend the cross question.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Offshore basics and platforms

Interview Preparation Tips

Interview preparation tips for other job seekers - NORSOK ALL STANDARDS FAMILIRIZATION
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Which column takes more load short or Long Column
  • Q2. What kind of pressures will impose on the water tank walls during seismic

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared with fundamentals
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I was interviewed in Apr 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Control Valve sizing
  • Q2. Flowmeter selection
Round 2 - HR 

(2 Questions)

  • Q1. Reason for shifting
  • Ans. 

    I shifted to pursue new opportunities for growth and development in my career.

    • Seeking new challenges and responsibilities

    • Exploring different industries or technologies

    • Relocation for personal reasons or family commitments

  • Answered by AI
  • Q2. Expected salary

I applied via Naukri.com and was interviewed before Aug 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Automation, Instrumentation, Testing
Round 3 - HR 

(1 Question)

  • Q1. Solution oriented mindset

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge depth
Project skills
EPC
Behavior

I applied via Naukri.com and was interviewed before Nov 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Basics related to piperack design
  • Q2. Design parameters for steel structure
  • Ans. 

    Design parameters for steel structure

    • Load capacity and distribution

    • Material strength and durability

    • Environmental factors such as wind and seismic activity

    • Connection details and joint design

    • Fire resistance and protection measures

  • Answered by AI
  • Q3. Number of years exposure to staad
  • Ans. 

    I have 5 years of exposure to STAAD software.

    • I have used STAAD for various structural analysis and design projects.

    • I am proficient in using STAAD for modeling, analysis, and design of steel and concrete structures.

    • I have experience in using STAAD for seismic analysis and design of structures.

    • I have also used STAAD for foundation design and analysis.

    • I keep myself updated with the latest versions and features of STAAD so

  • Answered by AI
  • Q4. Grating design and deflection limits

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive & confident

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. The HR round was very pathetic. Sreethala took my HR round.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please don't waste your precious time in giving the interview for Baker Hughes, Powai
Mumbai location. They will take all the interview rounds. The HR will ask you to submit all documents and last moment they will cancel your candidature without giving you any specific reason.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I was interviewed before Mar 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. About material science stress strain curve
  • Q2. About GD&T symbol details
  • Q3. What is factor of safety
  • Ans. 

    Factor of safety is the ratio of the maximum stress a material can withstand to the actual stress it is subjected to.

    • Factor of safety is used to ensure that a structure or component can withstand loads and stresses beyond what it is designed for.

    • It is calculated by dividing the ultimate strength of a material by the maximum stress it is expected to experience.

    • A factor of safety of 2 means that the material can withstan...

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. About the current industry
  • Q2. What is your role in current company
  • Ans. 

    I am responsible for designing and developing new products in my current company.

    • Designing and developing new products

    • Collaborating with cross-functional teams

    • Creating detailed engineering drawings

    • Conducting feasibility studies

    • Testing and evaluating prototypes

    • Implementing design improvements based on feedback

    • Ensuring compliance with industry standards and regulations

  • Answered by AI
  • Q3. Where do you see yourself after 5 years
  • Ans. 

    In 5 years, I see myself as a senior design engineer leading a team and working on innovative projects.

    • Leading a team of design engineers

    • Working on innovative and challenging projects

    • Continuously learning and improving my skills

    • Contributing to the growth and success of the company

  • Answered by AI
Round 4 - HR 

(1 Question)

  • Q1. What is your salary expectation
  • Ans. 

    I would expect a salary that is competitive with industry standards and reflects my experience and skills as a Design Engineer.

    • I would like my salary to be commensurate with my qualifications and the responsibilities of the position.

    • I have researched the average salary range for Design Engineers in this location and industry.

    • I am open to negotiation and would consider a comprehensive compensation package that includes ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Revise all the Engineering knowledge about all the subjects
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. General HR questions. Tell me about yourself and you experience. Family background, etc.
Round 2 - One-on-one 

(1 Question)

  • Q1. Past experience questions. Questions on various materials used and their properties and reasons to use them and not others. Heat treatment methods. Machining methods, drafting layouts and rules.

TechnipFMC Interview FAQs

How many rounds are there in TechnipFMC Senior Engineer Mechanical interview?
TechnipFMC interview process usually has 3 rounds. The most common rounds in the TechnipFMC interview process are Technical and Resume Shortlist.

Tell us how to improve this page.

Interview Questions from Similar Companies

ABB Interview Questions
4.1
 • 235 Interviews
Cummins Interview Questions
4.3
 • 231 Interviews
John Deere Interview Questions
4.1
 • 229 Interviews
Caterpillar Inc Interview Questions
4.3
 • 176 Interviews
Schlumberger Interview Questions
4.0
 • 136 Interviews
KONE Interview Questions
4.1
 • 101 Interviews
TÜV SÜD Interview Questions
3.9
 • 63 Interviews
Hilti Interview Questions
3.5
 • 60 Interviews
Wood Group Interview Questions
3.8
 • 58 Interviews
View all
TechnipFMC Senior Engineer Mechanical Salary
based on 16 salaries
₹8.8 L/yr - ₹18.1 L/yr
63% more than the average Senior Engineer Mechanical Salary in India
View more details

TechnipFMC Senior Engineer Mechanical Reviews and Ratings

based on 3 reviews

4.0/5

Rating in categories

3.9

Skill development

2.8

Work-life balance

3.4

Salary

2.6

Job security

2.5

Company culture

2.2

Promotions

3.4

Work satisfaction

Explore 3 Reviews and Ratings
Senior Engineer
171 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Lead Analyst
129 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
128 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Designer
112 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

L2 Engineer
110 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare TechnipFMC with

McDermott International

4.3
Compare

Saipem

4.1
Compare

Subsea 7

4.4
Compare

Baker Hughes

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview