AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Tata Steel
Compare
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
Tata Steel NDT Engineer Interview Questions, Process, and Tips for Experienced
Tata Steel NDT Engineer Interview Experiences for Experienced
1 interview found
I applied via Company Website and was interviewed in Jul 2021. There were 3 interview rounds.
Interview Questionnaire
6 Questions
- Q1. What is the meaning of ultrasonic testing and why we do ultrasonic testing and discribe the procedure of ultrasonic testing.
- Ans.
Ultrasonic testing is a non-destructive testing method that uses high-frequency sound waves to detect flaws or defects in materials.
Ultrasonic testing is used to detect internal flaws or defects in materials such as cracks, voids, and inclusions.
The procedure involves sending high-frequency sound waves through the material and measuring the time it takes for the waves to bounce back.
The reflected waves are then analyze...
- Q2. What is the principal of ultrasonic testing?
- Ans.
Ultrasonic testing uses high frequency sound waves to detect flaws or measure thickness in materials.
Ultrasonic waves are sent into the material being tested
The waves bounce back differently depending on the material's thickness or any flaws present
The reflected waves are analyzed to determine the material's properties
Commonly used in non-destructive testing of metals, plastics, and composites
- Q3. What is the procedure of LPT and principal of Dp?
- Ans.
LPT is Liquid Penetrant Testing used to detect surface defects. DP is Differential Pressure used to measure flow rate.
LPT involves applying a liquid penetrant to the surface of a material and then removing the excess to reveal any surface defects.
DP measures the difference in pressure between two points in a system to determine the flow rate.
DP can be used in various applications such as measuring the flow rate of flui...
- Q4. What you know about DAC?
- Ans.
DAC stands for Digital Acquisition System, used in NDT to convert analog signals to digital signals for analysis.
DAC is used in NDT to convert analog signals to digital signals for analysis
It is an important component of the inspection system
DAC is used to improve the accuracy of flaw detection and sizing
It can be used in ultrasonic, eddy current, and other NDT methods
DAC curves are used to calibrate the inspection sys
- Q5. What is the acceptance cateria of UT
- Ans.
Acceptance criteria of UT refers to the minimum standards that a material or component must meet to be considered acceptable for use.
The acceptance criteria of UT is based on the size, shape, and location of the defects found in the material or component being inspected.
The criteria may vary depending on the industry and application of the material or component.
The acceptance criteria may be specified in codes, standar...
- Q6. When and why we do MPT
Interview Preparation Tips
Skills evaluated in this interview
Interview questions from similar companies
I applied via Walk-in and was interviewed before Aug 2021. There were 4 interview rounds.
Question regarding GK and area of work
(1 Question)
- Q1. Interview with concerned HOD and questions answer and work experience reviews.
(1 Question)
- Q1. Salary and other perk and add ons.
Interview Preparation Tips
Good knowledge on current affairs and overall business environment.
I applied via Naukri.com and was interviewed in Feb 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. 7qc tool., Capa,5s,job responsiblty
Interview Preparation Tips
I applied via Job Portal and was interviewed in Apr 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. How increased my knowledge in steel industry for next levels
- Ans.
To advance in the steel industry, focus on continuous learning, networking, and practical experience.
Enroll in specialized courses on metallurgy and steel production processes.
Attend industry conferences and workshops to network with professionals.
Gain hands-on experience through internships or projects in steel manufacturing.
Stay updated with the latest technologies and innovations in the steel sector.
Join professiona...
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.
Current affairs and technical both questions will come be ready
(2 Questions)
- Q1. Question about what you studied technical branch that will ask
- Q2. Round 3 HR Personal information, occupation of father and mother
Interview Preparation Tips
- Mechanical Engineering
- Heat Treatment
- Hot roller
- Cold roller
Pramod Sahoo
Interview Questionnaire
2 Questions
- Q1. What is fault level and how to calculate it.
- Ans.
Fault level is the maximum current that can flow through a power system during a fault.
Fault level is a measure of the system's ability to handle fault currents.
It is important to calculate fault level to ensure the safety and reliability of the power system.
Fault level can be calculated by considering the impedance of the system and the available fault current sources.
The calculation involves determining the maximum f...
- Q2. What will you do when your all subordinates approach you to grant leave at a time.
- Ans.
I would assess the situation, prioritize based on urgency and impact on operations, and make a fair decision considering the needs of the team and the business.
Assess the reasons for leave requests - urgent personal matters, planned vacations, etc.
Prioritize based on urgency and impact on operations - critical tasks, team workload, upcoming deadlines.
Consider alternative solutions - shifting schedules, temporary replac...
I applied via Naukri.com and was interviewed in Apr 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. About salary hike
Interview Preparation Tips
Junior Engineer Interview Questions & Answers
Jindal Steel and Power
Anonymous
posted on 12 May 2022
I applied via Campus Placement and was interviewed before May 2021. There were 3 interview rounds.
Maximum questions from thermodynamics ,Som,Fluid
(1 Question)
- Q1. 1.Tell me about Yourself 2.What is your strength & weakness 3.How you can contribute for the company as a Trainee 4.Which is your favourite subject 5.How Carburator works
Interview Preparation Tips
- Subject you love most
Selected
I applied via Company Website and was interviewed in Feb 2024. There were 2 interview rounds.
(1 Question)
- Q1. 7Qc tools, 5S, TPM, Kaizen, Root cause, Quality Parameters, SAP Management, Incoming Quality tools
(1 Question)
- Q1. TPM , 7Qc tools, CAPA
Selected
I applied via Walk-in and was interviewed in Aug 2023. There was 1 interview round.
(5 Questions)
- Q1. What is the difference between MCB and overload realy?
- Ans.
MCB and overload relay are both electrical protection devices, but they serve different purposes.
MCB stands for Miniature Circuit Breaker and is used to protect electrical circuits from overcurrents and short circuits.
Overload relay is used to protect motors and other electrical equipment from excessive current that can cause overheating and damage.
MCB operates based on the principle of thermal and magnetic tripping, w...
- Q2. Working of soft starter?
- Ans.
A soft starter is a device used to gradually start and stop the motor by controlling the voltage applied to it.
Soft starters are used to reduce the starting current and torque of an electric motor.
They provide a smooth and controlled acceleration and deceleration of the motor.
Soft starters can be used in various applications such as pumps, fans, and conveyor belts.
They typically consist of power electronics, control ci...
- Q3. Working of drive?
- Ans.
A drive is a device that reads and writes data to storage media, allowing users to access and store information.
Drives can be internal or external, such as hard disk drives (HDDs) or solid-state drives (SSDs).
They use various technologies like magnetic or flash memory to store data.
Drives are connected to a computer or device through interfaces like SATA, USB, or PCIe.
They have controllers that manage data transfer and...
- Q4. Why we use star delta starter?
- Ans.
Star delta starters are used to reduce the starting current of induction motors.
Star delta starters are used in applications where the starting current needs to be limited.
They are commonly used in industries where large motors are employed.
By starting the motor in star configuration, the current is reduced to one-third of the delta configuration.
This helps in preventing excessive voltage drop and reduces stress on the...
- Q5. What is the protection of transformer?
- Ans.
The protection of a transformer involves various measures to ensure its safe and reliable operation.
Overcurrent protection: Protects against excessive current flow.
Overvoltage protection: Guards against high voltage surges.
Under/over frequency protection: Monitors and controls the frequency of the input power.
Temperature protection: Prevents overheating by monitoring the transformer's temperature.
Buchholz relay protect...
Skills evaluated in this interview
Tata Steel Interview FAQs
Some of the top questions asked at the Tata Steel NDT Engineer interview for experienced candidates -
Tell us how to improve this page.
Tata Steel Interviews By Designations
- Tata Steel Junior Engineer Interview Questions
- Tata Steel Assistant Manager Interview Questions
- Tata Steel Management Trainee Interview Questions
- Tata Steel Associate Engineer Interview Questions
- Tata Steel Mechanical Engineer Interview Questions
- Tata Steel Manager Interview Questions
- Tata Steel Intern Interview Questions
- Tata Steel Supervisor Interview Questions
- Show more
Interview Questions for Popular Designations
- NDT Technician Interview Questions
- Quality Engineer Interview Questions
- NDT Inspector Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Production Engineer Interview Questions
- Electrical Engineer Interview Questions
- Junior Engineer Interview Questions
- Service Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
Fast track your campus placements
Tata Steel NDT Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Manager
1.6k
salaries
|  ₹6 L/yr - ₹20 L/yr |
|
Assistant Manager
1.4k
salaries
| ₹5.2 L/yr - ₹14.9 L/yr |
|
Senior Manager
1.2k
salaries
| ₹9.3 L/yr - ₹35 L/yr |
|
Associate Engineer
930
salaries
| ₹2 L/yr - ₹8 L/yr |
|
Junior Engineer
893
salaries
| ₹2 L/yr - ₹12 L/yr |
JSW Steel
Jindal Steel and Power
ArcelorMittal Nippon Steel
Jindal Stainless
- Home >
- Interviews >
- Tata Steel Interview Questions >
- Tata Steel NDT Engineer Interview Questions for Experienced
