20+ KPMG India Interview Questions and Answers

Ductile iron is a type of cast iron that contains graphite in the form of nodules, making it more flexible and durable.

• Ductile iron is also known as nodular cast iron or spheroidal graphite iron.

• It is made by adding small amounts of magnesium or cerium to molten iron, which causes the graphite to form nodules instead of flakes.

• This gives ductile iron its unique properties of high strength, toughness, and ductility.

• It is commonly used in automotive and construction industries ...read more

A 3 phase transformer is a type of transformer that is designed to handle three-phase power distribution systems.

• Consists of three sets of primary and secondary windings

• Used in power distribution systems to step up or step down voltage in three-phase circuits

• Commonly used in industrial and commercial applications

• Examples include distribution transformers, power transformers, and autotransformers

Pump shaft vibration monitoring is required to ensure smooth operation and prevent damage to the pump and its components.

• Vibration monitoring helps detect any abnormalities in the pump's operation

• Excessive vibration can cause damage to the pump and its components

• Monitoring can help identify the root cause of vibration and prevent future issues

• Regular monitoring can help extend the lifespan of the pump

• Examples of monitoring methods include vibration sensors and analysis softwa...read more

Yes, I have experience working in a thermal power plant.

• I have worked as a Mill Wright Fitter in a thermal power plant for X years.

• I am familiar with the equipment and machinery used in thermal power plants.

• I have experience in maintenance, repair, and installation of various components in a thermal power plant.

• I am knowledgeable about safety protocols and procedures specific to thermal power plants.

A 3 phase transformer is a type of transformer that is designed to handle three-phase power distribution systems.

• Consists of three sets of primary and secondary windings

• Used in power distribution systems to step up or step down voltage in three-phase circuits

• Commonly used in industrial and commercial applications

• Examples include distribution transformers, power transformers, and autotransformers

A 2 phase transformer is a type of transformer that has two primary and two secondary windings.

• Consists of two primary windings and two secondary windings

• Used in certain industrial applications where a 3 phase transformer is not feasible

• Less common compared to single phase and 3 phase transformers

IBR welding is a type of welding used in high pressure pipes that follows the guidelines set by the Indian Boiler Regulations.

• IBR stands for Indian Boiler Regulations

• IBR welding is a type of welding that follows the guidelines set by the Indian Boiler Regulations

• It is used in high pressure pipes to ensure safety and quality

• The welding process involves preheating the pipes, using specific electrodes, and following strict welding procedures

• IBR welding is mandatory for all high ...read more

Welding is a process of joining two or more metal pieces by melting and fusing them together. There are various types of welding techniques used in different industries.

• Welding is used in various industries such as construction, automotive, aerospace, and manufacturing.

• Some common types of welding include MIG welding, TIG welding, stick welding, and flux-cored welding.

• Welding requires a high level of skill and precision to ensure the strength and durability of the joint.

• Safet...read more

A semiconductor is a material that has electrical conductivity between a conductor and an insulator.

• Semiconductors have a conductivity between that of a conductor and an insulator

• They are used in electronic devices such as transistors, diodes, and integrated circuits

• Common semiconductor materials include silicon, germanium, and gallium arsenide

Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied across it, and inversely proportional to the resistance of the conductor.

• Current (I) = Voltage (V) / Resistance (R)

• It helps in calculating the current flowing through a circuit based on the voltage and resistance values.

• It is represented by the formula I = V/R.

• Ohm's Law is fundamental in understanding and analyzing electrical circuits.

Kirchhoff's current law states that the total current entering a junction is equal to the total current leaving the junction.

• Total current entering a junction = Total current leaving the junction

• It is based on the principle of conservation of charge

• Used to analyze and solve electrical circuits

I have 5 years of experience working in chemical plants, performing maintenance and repairs on various equipment.

• Experience with troubleshooting and repairing pumps, compressors, and other machinery

• Knowledge of safety protocols and procedures in a chemical plant environment

• Familiarity with reading and interpreting technical drawings and schematics

• Ability to work with various tools and equipment used in a chemical plant

• Experience working with different types of materials and c...read more

To draw a dol starter, follow these steps:

• Draw a rectangle for the base

• Draw two vertical lines for the stator

• Add the rotor in the center

• Draw the contactor and overload relay on top

• Label the parts for clarity

My core value is integrity.

• I believe in being honest and transparent in all my actions.

• I prioritize doing the right thing, even if it's not the easiest or most popular choice.

• I strive to maintain a strong moral compass and hold myself accountable for my actions.

• I believe that integrity is essential in building trust and fostering positive relationships with colleagues and stakeholders.

The total number of hydraulic cylinders in a CCM machine varies depending on the specific model and design.

• The number of hydraulic cylinders in a CCM machine can range from 4 to 12 or more, depending on the size and complexity of the machine.

• Each hydraulic cylinder in a CCM machine serves a specific function, such as controlling the movement of the mold or applying pressure to the molten metal.

• The hydraulic cylinders in a CCM machine are essential components for ensuring smoo...read more

I have extensive experience working with AFBC boilers in previous roles.

• I have successfully maintained and repaired AFBC boilers in a power plant setting.

• I am familiar with the operation and troubleshooting of AFBC boilers.

• I have experience with conducting routine inspections and ensuring compliance with safety regulations.

• I have worked on projects involving the installation and commissioning of AFBC boilers.

Tata Metalliks is a leading manufacturer of pig iron and ductile iron pipes in India.

• Tata Metalliks is a subsidiary of Tata Steel, one of the largest steel companies in the world.

• The company produces pig iron, which is used as a raw material in steel production.

• Tata Metalliks also manufactures ductile iron pipes, which are used in water supply and sewage systems.

• The company has a strong focus on sustainability and environmental responsibility in its operations.

CSMS stands for Contractor Safety Management System, which is a set of policies and procedures to ensure safety of contractors.

• CSMS is a framework to manage safety of contractors working on a project

• It includes policies and procedures for identifying and mitigating safety risks

• CSMS also involves training and monitoring of contractors to ensure compliance

• Examples of CSMS activities include safety audits, hazard assessments, and safety training programs

Crane wheel wear is caused by factors such as overloading, misalignment, lack of lubrication, and poor maintenance.

• Overloading the crane beyond its capacity can cause excessive wear on the wheels.

• Misalignment of the crane wheels can lead to uneven wear and premature failure.

• Lack of proper lubrication can increase friction and wear on the wheels.

• Poor maintenance practices, such as not regularly inspecting and replacing worn parts, can contribute to crane wheel wear.

Limits used in EOT crane include overload limit, travel limit, and height limit.

• Overload limit prevents the crane from lifting loads beyond its capacity

• Travel limit restricts the crane's movement within a specified range

• Height limit ensures the crane does not exceed the maximum height for safe operation