Upload Button Icon Add office photos

Filter interviews by

Syncfusion Network Engineer Interview Questions and Answers

Updated 15 Feb 2024

Syncfusion Network Engineer Interview Experiences

2 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Walk-in and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

It's all about network based questions ..like NAT , Firewall ..

Round 2 - One-on-one 

(2 Questions)

  • Q1. About technical questions.. And like hr questions..
  • Q2. Draw tcp/ip format ... Explain abt firewall...
  • Ans. 

    TCP/IP format is a set of rules for communication between devices on a network. Firewall is a security system that monitors and controls incoming and outgoing network traffic.

    • TCP/IP format consists of four layers - application, transport, internet, and network access

    • Firewalls can be hardware or software-based

    • They can be configured to allow or block specific traffic based on rules

    • Examples of firewall include Cisco ASA,

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare about networking protocols thoroughly and ready for the written test as well as one to one round.

Skills evaluated in this interview

Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-

I applied via Naukri.com

Round 1 - Aptitude Test 

1st round will be aptitude

Round 2 - Coding Test 

Second round will be coding test

Round 3 - HR 

(7 Questions)

  • Q1. 3rd round will be hr round
  • Q2. Tell about yourself?
  • Q3. Why should we hire you
  • Q4. Salary expectation?
  • Q5. What will be do after 5 years?
  • Q6. Tell about your project in detail
  • Q7. What is positive?
  • Ans. 

    Positive refers to something that is favorable, constructive, or optimistic.

    • Positive can describe a person's attitude or mindset.

    • Positive can refer to the outcome or result of a situation.

    • Positive can also relate to the presence of something beneficial or desirable.

    • Positive can be used in mathematics to indicate a number greater than zero.

    • Positive can be contrasted with negative, which represents the opposite.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm and try your best

Network Engineer Interview Questions Asked at Other Companies

asked in Movate
Q1. TCP/IP layers, why is transport needed for communication? What is ... read more
Q2. Study MPLS deeply: 1. What is MPLS ? 2. Purpose of MPLS ? 3. What ... read more
asked in Wipro
Q3. What is Stp and how it is work? What is root bridge
Q4. What is BGP? What is spilit horizon rule? How you configure BGP r ... read more
asked in BT Group
Q5. What is tenant and types? What will happen if we use same subnet ... read more

Network Engineer Jobs at Syncfusion

View all

Interview questions from similar companies

Network Engineer Interview Questions & Answers

Zscaler Softech user image SABARI VENKATESH K ECE

posted on 29 Mar 2024

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response
Round 1 - Aptitude Test 

Questions are from CN , PYTHON, OS

Round 2 - Technical 

(1 Question)

  • Q1. Questions from cn, python, Linux ,os
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Job Portal

Round 1 - Technical 

(2 Questions)

  • Q1. Explain osi model in detail.
  • Ans. 

    The OSI model is a conceptual framework that defines the functions of a network into seven distinct layers.

    • The OSI model stands for Open Systems Interconnection model.

    • It was developed by the International Organization for Standardization (ISO) in 1984.

    • The model is divided into seven layers: Physical, Data Link, Network, Transport, Session, Presentation, and Application.

    • Each layer has its own specific functions and prot...

  • Answered by AI
  • Q2. Tell me your responsibalities in your current role.

Skills evaluated in this interview

I applied via campus placement at Kanpur University and was interviewed in Oct 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

A batsman scored 110 runs which included 3 boundaries and 8 sixes. What percent of his total score did he make by running between the wickets?

Round 2 - Technical 

(2 Questions)

  • Q1. About your subjects and projects
  • Q2. What was made in the project and on what language

Interview Preparation Tips

Topics to prepare for Chetu Network Engineer interview:
  • Aptitude
Interview preparation tips for other job seekers - Tell me about yourself? Why do you want to work here? What’s a time you exercised leadership skills? Where do you see yourself in five years? These are some questions that you may be asked during your interview. If you know they could be asked, don’t stress about them, just prepare for them.

I applied via LinkedIn and was interviewed in Oct 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How VPC works?
  • Ans. 

    VPC (Virtual Private Cloud) is a virtual network in the cloud that allows users to securely connect their resources.

    • VPC provides isolated networking environment in the cloud

    • Users can define their own IP address range, subnets, and route tables

    • VPC allows creation of public and private subnets

    • Network Access Control Lists (ACLs) and Security Groups can be used to control inbound and outbound traffic

    • VPC peering enables con...

  • Answered by AI
  • Q2. How IPSec works? and what are the different packets which are exchanged during runnel formation?
  • Ans. 

    IPSec is a protocol suite used to secure IP communications by authenticating and encrypting each IP packet.

    • IPSec operates at the network layer of the OSI model.

    • It provides data confidentiality, integrity, and authentication.

    • IPSec uses two main protocols: Authentication Header (AH) and Encapsulating Security Payload (ESP).

    • During tunnel formation, the following packets are exchanged: IKE Phase 1 Main Mode, IKE Phase 1 Ag

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare a lot, be confident in answering

Skills evaluated in this interview

Network Engineer Interview Questions & Answers

Zscaler Softech user image SABARI VENKATESH K ECE

posted on 29 Mar 2024

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response
Round 1 - Aptitude Test 

Questions are from CN , PYTHON, OS

Round 2 - Technical 

(1 Question)

  • Q1. Questions from cn, python, Linux ,os
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - verbal test 

(1 Question)

  • Q1. Read back dictation on screen
  • Ans. 

    The question requires the candidate to read back a dictated text on the screen.

    • The candidate should listen carefully to the dictated text.

    • The candidate should then read back the text accurately.

    • The candidate should ensure that they have understood the text before reading it back.

    • Examples: 'Please read back the following sentence: The quick brown fox jumps over the lazy dog.'

    • Examples: 'Please read back the following par...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is OSPF, BGP, networking
  • Ans. 

    OSPF and BGP are routing protocols used in networking to determine the best path for data to travel.

    • OSPF (Open Shortest Path First) is an interior gateway protocol used to route IP packets within a single network.

    • BGP (Border Gateway Protocol) is an exterior gateway protocol used to route data between different networks.

    • Networking refers to the practice of connecting devices together to share resources and communicate w...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for managerial questions more in comparison to technical questions

Skills evaluated in this interview

I applied via campus placement at Kanpur University and was interviewed in Oct 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

A batsman scored 110 runs which included 3 boundaries and 8 sixes. What percent of his total score did he make by running between the wickets?

Round 2 - Technical 

(2 Questions)

  • Q1. About your subjects and projects
  • Q2. What was made in the project and on what language

Interview Preparation Tips

Topics to prepare for Chetu Network Engineer interview:
  • Aptitude
Interview preparation tips for other job seekers - Tell me about yourself? Why do you want to work here? What’s a time you exercised leadership skills? Where do you see yourself in five years? These are some questions that you may be asked during your interview. If you know they could be asked, don’t stress about them, just prepare for them.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Job Portal

Round 1 - Technical 

(2 Questions)

  • Q1. Explain osi model in detail.
  • Ans. 

    The OSI model is a conceptual framework that defines the functions of a network into seven distinct layers.

    • The OSI model stands for Open Systems Interconnection model.

    • It was developed by the International Organization for Standardization (ISO) in 1984.

    • The model is divided into seven layers: Physical, Data Link, Network, Transport, Session, Presentation, and Application.

    • Each layer has its own specific functions and prot...

  • Answered by AI
  • Q2. Tell me your responsibalities in your current role.

Skills evaluated in this interview

Syncfusion Interview FAQs

How many rounds are there in Syncfusion Network Engineer interview?
Syncfusion interview process usually has 3 rounds. The most common rounds in the Syncfusion interview process are Aptitude Test, One-on-one Round and Coding Test.
How to prepare for Syncfusion Network Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Syncfusion. The most common topics and skills that interviewers at Syncfusion expect are DHCP, VPN, DNS, Firewall and CCNA.
What are the top questions asked in Syncfusion Network Engineer interview?

Some of the top questions asked at the Syncfusion Network Engineer interview -

  1. Draw tcp/ip format ... Explain abt firewall...read more
  2. What is positi...read more
  3. 3rd round will be hr ro...read more

Tell us how to improve this page.

Syncfusion Network Engineer Interview Process

based on 2 interviews

Interview experience

2.5
  
Poor
View more
Syncfusion Network Engineer Salary
based on 8 salaries
₹2 L/yr - ₹3.7 L/yr
37% less than the average Network Engineer Salary in India
View more details
Software Engineer
404 salaries
unlock blur

₹2 L/yr - ₹7 L/yr

Software Developer
311 salaries
unlock blur

₹2 L/yr - ₹8.1 L/yr

Test Engineer
84 salaries
unlock blur

₹2 L/yr - ₹4.1 L/yr

Softwaretest Engineer
62 salaries
unlock blur

₹2.4 L/yr - ₹8 L/yr

Product Manager
46 salaries
unlock blur

₹9.2 L/yr - ₹21 L/yr

Explore more salaries
Compare Syncfusion with

TCS

3.7
Compare

Infosys

3.6
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview