Upload Button Icon Add office photos

Subros

Compare button icon Compare button icon Compare

Filter interviews by

Subros Diploma Apprenticeship Assistant Interview Questions and Answers

Updated 14 Jun 2024

Subros Diploma Apprenticeship Assistant Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Introduction about myself
  • Q2. Quick test about our knowledge about industrial area
Round 2 - Aptitude Test 

Question paper about general knowledge and general science

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be a confident and calm
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected

I appeared for an interview in Apr 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Designer on autocad and catia v5
  • Ans. 

    I have experience working as a designer on AutoCAD and CATIA V5.

    • Proficient in creating 2D and 3D models using AutoCAD and CATIA V5

    • Knowledge of drafting, modeling, and assembly design

    • Experience in creating technical drawings and blueprints

    • Ability to collaborate with engineers and other team members to develop designs

    • Familiarity with industry standards and best practices in design

  • Answered by AI
  • Q2. How work hard for company growth
  • Q3. How you have experience in subros
  • Ans. I've drawn every part drawing like .... condenser, fin plate evaporater , serpentine evaporater, sfa1 and sfa2 heater, RS evaporater, rotary compressor and reciprocating compressor with all different models
  • Answered Anonymously
  • Q4. How you work at line
Round 3 - Case Study 

Yes I'm ready so you can trayal at yes

Round 4 - Aptitude Test 

Yea we r ready to work hard and hard

Interview Preparation Tips

Interview preparation tips for other job seekers - Provide me a interview for job in design department

Diploma Apprenticeship Assistant Interview Questions Asked at Other Companies

Q1. How to explain engine component and materials Piston -alluminium ... read more
asked in Subros
Q2. Designer on autocad and catia v5
asked in Tata Motors
Q3. What is Ohm's low
asked in Tata Motors
Q4. Typs of induction motor

Interview questions from similar companies

Interview Questionnaire 

3 Questions

  • Q1. Regarding some steel grade
  • Q2. Regarding ctc and date of joini g after geting of offer
  • Q3. About transporting

Interview Preparation Tips

Round: Group Discussion
Experience: Some technical discussion regarding alloy steel making

I applied via Walk-in and was interviewed before Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. The First question was tell me about yourself and whats your goal in life?
  • Q2. I said only those things which is not written in my resume and about my goal I said I want to became a successful person in my life and achieving power for doing everything.

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't be nervous .
And during interview please feel free and fully confidence.

I applied via Company Website and was interviewed in Oct 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Electronics Engineering
  • Q2. Hard work

Interview Preparation Tips

Interview preparation tips for other job seekers - Sir,/ maidam
Good afternoon
My name is pavan Kumar mayank/Nagendra Kumar mayank
DOB,12/05/1998
High school,2013 ,72%
Inter 2015,76%
Diploma2019,68%

I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Qms related all questions (ISO/IATF). And how development of products in process, Processe controls
  • Q2. How can improve communication and personality
  • Ans. 

    Improving communication and personality requires self-awareness, active listening, and continuous learning.

    • Practice active listening to understand others' perspectives

    • Be aware of your own communication style and adjust as needed

    • Seek feedback and be open to constructive criticism

    • Read books or take courses on communication and interpersonal skills

    • Practice empathy and emotional intelligence

    • Be respectful and courteous in a

  • Answered by AI
  • Q3. How can show your potential
  • Q4. How can show first impressions
  • Ans. 

    First impressions can be shown through body language, attire, and communication skills.

    • Body language can convey confidence or nervousness

    • Attire can show professionalism or lack thereof

    • Communication skills can demonstrate intelligence and articulation

    • Eye contact and a firm handshake can also make a positive impression

  • Answered by AI

I applied via Recruitment Consultant and was interviewed in Jan 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Q1. What is MHr ? And how costing is done ?
  • Ans. 

    MHr stands for Man-Hour. Costing is done by calculating the total number of man-hours required for a task and multiplying it by the cost per hour.

    • MHr stands for Man-Hour, which is a unit of measurement for the amount of work performed by an individual in one hour.

    • Costing is done by determining the total number of man-hours required for a specific task or project.

    • The cost per hour is then multiplied by the total number ...

  • Answered by AI
  • Q2. Q2. Current pricing of ADC 12 & plastic resins.
  • Ans. 

    I do not have the current pricing information for ADC 12 & plastic resins.

    • I apologize, but I do not have the current pricing information for ADC 12 & plastic resins.

    • I would need to conduct research or consult with a colleague who has access to this information.

    • Pricing for these materials can fluctuate frequently based on market demand and other factors.

  • Answered by AI
  • Q3. Q3. How you do costing of Plastic & Casting parts.
  • Ans. 

    Costing of plastic and casting parts involves analyzing material costs, production processes, and overhead expenses.

    • Analyze the material costs by considering the type and quantity of plastic or casting material required.

    • Evaluate the production processes involved in manufacturing the parts, including molding or casting techniques.

    • Consider the labor costs, machine costs, and energy costs associated with the production pr...

  • Answered by AI
  • Q4. Q4. To give you a plastic part, & you have to analyse on what machine it will run & it's tool cost.
  • Ans. 

    To determine the machine and tool cost for a plastic part.

    • Analyze the dimensions and material of the plastic part

    • Identify the required tolerances and surface finish

    • Consider the production volume and lead time

    • Research the available machines and their capabilities

    • Calculate the tooling cost based on the chosen machine

    • Consider the maintenance and operating costs of the machine

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You should be confident what you are saying. If you don't know answer , directly say "i couldn't recall" don't bluff.
Be a gem in your area, if you don't have any answer ,show them your capabilities that you can do it when you ll be given the task.

I applied via Naukri.com and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Rules and regulations , work position

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview was a technical it lasted for 30 minutes. The interviewer wanted to test my knowledge and communication skills mostly questions asked to my work related

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

7 Questions

  • Q1. Which types of lacquer used on lens and Housing ?
  • Ans. 

    The types of lacquer used on lens and housing include acrylic lacquer, polyurethane lacquer, and epoxy lacquer.

    • Acrylic lacquer is commonly used on lens and housing due to its high transparency and UV resistance.

    • Polyurethane lacquer provides excellent durability and chemical resistance, making it suitable for lens and housing.

    • Epoxy lacquer offers superior adhesion and impact resistance, making it a preferred choice for

  • Answered by AI
  • Q2. What is size fine filter ?
  • Ans. 

    A size fine filter is a type of filter used to remove small particles or impurities from a fluid or gas.

    • Size fine filters are commonly used in industries such as manufacturing, pharmaceuticals, and food processing.

    • They are designed to capture particles that are smaller than what can be filtered by regular filters.

    • These filters can be made of various materials such as paper, fabric, or synthetic fibers.

    • Examples of size ...

  • Answered by AI
  • Q3. On which material direct metalizing is applicable ?
  • Ans. 

    Direct metalizing is applicable on materials that can conduct electricity.

    • Direct metalizing is a process of coating a non-metallic surface with a thin layer of metal.

    • The material should be able to conduct electricity for direct metalizing to be applicable.

    • Materials like plastic, glass, and ceramics can be direct metalized.

    • Direct metalizing is commonly used in the automotive, aerospace, and electronics industries.

  • Answered by AI
  • Q4. PC Material
  • Q5. How much UV energy is required for curing?
  • Ans. 

    The amount of UV energy required for curing depends on the type of material being cured and the intensity of the UV light.

    • UV energy required for curing varies depending on the material being cured

    • Intensity of the UV light also affects the amount of energy required

    • UV energy is typically measured in Joules per square centimeter (J/cm²)

    • Examples of materials that require UV curing include adhesives, coatings, and inks

  • Answered by AI
  • Q6. 2500 ~ 3500
  • Q7. How much DFT is required as per standard ?
  • Ans. 

    The amount of DFT required as per standard varies depending on the specific industry and project requirements.

    • The required amount of DFT (Design for Testability) is determined by industry standards and project specifications.

    • Different industries may have different standards for DFT.

    • The complexity and size of the project also influence the amount of DFT required.

    • DFT techniques include scan chains, built-in self-test (BI...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It must be done as like process catroled

I applied via Company Website and was interviewed before Aug 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Lithium iron battery related
Round 3 - One-on-one 

(1 Question)

  • Q1. Lithium iron battery service related
Round 4 - HR 

(1 Question)

  • Q1. Salary package related and self-control

Interview Preparation Tips

Interview preparation tips for other job seekers - Best service experience in lithium iron battery field.

Subros Interview FAQs

How many rounds are there in Subros Diploma Apprenticeship Assistant interview?
Subros interview process usually has 3 rounds. The most common rounds in the Subros interview process are Aptitude Test, Resume Shortlist and Technical.
What are the top questions asked in Subros Diploma Apprenticeship Assistant interview?

Some of the top questions asked at the Subros Diploma Apprenticeship Assistant interview -

  1. Designer on autocad and catia...read more
  2. Quick test about our knowledge about industrial a...read more

Tell us how to improve this page.

Subros Diploma Apprenticeship Assistant Interview Process

based on 2 interviews

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

JBM Group Interview Questions
4.0
 • 280 Interviews
Spark Minda Interview Questions
3.9
 • 122 Interviews
Gabriel India Interview Questions
4.2
 • 99 Interviews
NBC Bearings Interview Questions
3.9
 • 84 Interviews
CIE Automotive Interview Questions
3.6
 • 76 Interviews
DENSO Interview Questions
4.1
 • 76 Interviews
View all
Subros Diploma Apprenticeship Assistant Salary
based on 24 salaries
₹1 L/yr - ₹3 L/yr
31% less than the average Diploma Apprenticeship Assistant Salary in India
View more details

Subros Diploma Apprenticeship Assistant Reviews and Ratings

based on 5 reviews

3.9/5

Rating in categories

4.3

Skill development

4.3

Work-life balance

2.5

Salary

4.3

Job security

3.8

Company culture

2.8

Promotions

4.0

Work satisfaction

Explore 5 Reviews and Ratings
Assistant Engineer
2.7k salaries
unlock blur

₹1.5 L/yr - ₹4 L/yr

Deputy Engineer
1.8k salaries
unlock blur

₹1.5 L/yr - ₹4.6 L/yr

Diploma Trainee Engineer
921 salaries
unlock blur

₹1.2 L/yr - ₹3.2 L/yr

Engineer
414 salaries
unlock blur

₹1.7 L/yr - ₹7.8 L/yr

Production Engineer
351 salaries
unlock blur

₹1.2 L/yr - ₹6.8 L/yr

Explore more salaries
Compare Subros with

JBM Group

4.0
Compare

Endurance Technologies

3.9
Compare

Spark Minda

3.9
Compare

Gabriel India

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview