Sri Krishna Pharmaceuticals Executive Engineer Interview Questions and Answers for Experienced

The power of a pump can be calculated using the formula: Power = (Flow rate x Head) / Efficiency

• The power of a pump is determined by the flow rate, head, and efficiency

• Flow rate is the volume of fluid passing through the pump per unit time

• Head is the height difference between the inlet and outlet of the pump

• Efficiency is the ratio of the actual power output to the power input

• The formula to calculate power is: Power = (...read more

Air flow in HVAC ducting can be calculated using the formula Q = AV

• Q = air flow rate in cubic feet per minute (CFM)

• A = cross-sectional area of the duct in square feet

• V = air velocity in feet per minute (FPM)

• Air velocity can be measured using a pitot tube or an anemometer

• Duct sizing and layout can affect air flow and should be considered in calculations

A reactor can be installed by following a few steps.

• Choose a suitable location for the reactor

• Prepare the foundation for the reactor

• Install the reactor vessel and associated equipment

• Connect the piping and electrical systems

• Test the reactor for proper functioning

Commissioning of a reactor involves a series of tests and procedures to ensure safe and efficient operation.

• Pre-commissioning checks and inspections

• Functional testing of equipment and systems

• Testing of safety systems

• Fuel loading and reactor startup

• Performance testing and optimization

• Final acceptance testing

• Documentation and training

• Regulatory approval

• Examples: Pressurized Water Reactor (PWR), Boiling Water Reactor (BWR

Condensers are used to convert high-pressure vapor into liquid form.

• Condensers are used in various industries such as power plants, refrigeration systems, and chemical processing plants.

• They help in increasing the efficiency of the system by reducing the pressure and temperature of the vapor.

• They also help in recovering valuable materials from the vapor, such as water in a power plant.

• Examples of condensers include she...read more

VCB stands for Vacuum Circuit Breaker, which is an electrical switch that uses vacuum as the dielectric medium.

• VCB is used to protect electrical equipment from damage caused by overcurrents and short circuits.

• It is commonly used in high voltage power systems.

• VCBs are more reliable and require less maintenance compared to other types of circuit breakers.

• They are also more environmentally friendly as they do not use any ...read more

DG stands for Diesel Generator, which is a backup power source used in case of power outages.

• DG is a standalone power source that runs on diesel fuel.

• It is commonly used as a backup power source in case of power outages.

• DGs are often used in hospitals, data centers, and other critical facilities to ensure uninterrupted power supply.

• They come in various sizes and capacities, depending on the power requirements of the fa...read more

DC motors convert electrical energy into mechanical energy through the interaction of magnetic fields.

• DC motors have a stationary part called the stator and a rotating part called the rotor.

• The stator contains the field windings that produce a magnetic field, while the rotor has the armature windings that carry the current.

• The interaction of the magnetic fields causes the rotor to rotate, producing mechanical energy.

• DC...read more

PLC stands for Programmable Logic Controller, a digital computer used for automation of electromechanical processes.

• PLCs are used in industrial automation to control machinery and processes

• They are programmed using ladder logic or other programming languages

• PLCs can communicate with other devices and systems through various communication protocols

• Examples of PLC applications include manufacturing, transportation, and b