Upload Button Icon Add office photos

Shriram Pistons & Rings

Compare button icon Compare button icon Compare

Filter interviews by

Shriram Pistons & Rings Diploma Trainee Engineer Interview Questions and Answers

Updated 14 Jul 2024

Shriram Pistons & Rings Diploma Trainee Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jul 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Engineering & general aptitude

Round 2 - Technical 

(3 Questions)

  • Q1. Thermal engineering
  • Q2. Machines & process related
  • Q3. Introduction & related
Round 3 - Technical 

(2 Questions)

  • Q1. Deep engineering questions
  • Q2. Egg drawing & ic engine

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well before going for interview & written

Interview Questionnaire 

1 Question

  • Q1. 1.Working of mech. Braking system. 2.Material of piston and connecting rod 3.which will be more heavy between 1kg. of ice and 1kg. of cotton. 4.How will you calculate the weight of machine scrap removed f...

Diploma Trainee Engineer Interview Questions Asked at Other Companies

asked in MSPL
Q1. Wich of the following laws states that: in any electrical network ... read more
Q2. Why use Electrical CAD? How draw Symbol of perpendicularity
Q3. What will be the possible reason behind heavy white smoke ?
Q4. Which Types of engine make a tata Cummins
asked in Daikin
Q5. Define one cycle of refrigeration with thermodynamic processes?

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Jun 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About lathe machines and
  • Q2. Previous company work
  • Ans. 

    I worked as a Junior Engineer at XYZ Company for 2 years, where I gained experience in project management and technical troubleshooting.

    • Managed multiple projects simultaneously

    • Collaborated with cross-functional teams to achieve project goals

    • Resolved technical issues on the production line

    • Implemented process improvements to increase efficiency

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Join interview and take care for your language and give the correct answer as you think is not asking the hard question best of luck

I applied via Campus Placement and was interviewed in Aug 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. About your self?
  • Q2. What is tolerance?
  • Ans. 

    Tolerance refers to the acceptable range of variation in a measurement or specification.

    • Tolerance is important in manufacturing to ensure that products meet the required specifications.

    • It is usually expressed as a range of values or as a maximum deviation from a target value.

    • For example, if a part is supposed to be 10 cm long with a tolerance of +/- 0.1 cm, it means that the actual length can be anywhere between 9.9 cm...

  • Answered by AI
  • Q3. How do you mean by angle projection?
  • Ans. 

    Angle projection is a method of representing a 3D object on a 2D plane using angles.

    • It involves projecting the object onto a plane at a specific angle.

    • The angles used in the projection are typically 45 degrees or 30 degrees.

    • This method is commonly used in engineering and architecture for creating technical drawings.

    • It helps to show the true shape and size of the object in a clear and concise manner.

    • Examples of angle pr...

  • Answered by AI
  • Q4. Engineering drawing symbols?
  • Q5. CNC best question like 'M' code 'G' code?

Interview Preparation Tips

Interview preparation tips for other job seekers - Was a little scared, was a little bit shocked but liked giving interviews.

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. How a Thermal plant works?
  • Ans. 

    A thermal plant works by converting heat energy into electrical energy through the use of steam turbines.

    • Fuel (such as coal, natural gas, or nuclear fuel) is burned to produce heat

    • The heat is used to boil water and produce steam

    • The steam turns a turbine connected to a generator, producing electricity

    • The electricity is then sent to the grid for distribution

    • Cooling systems are used to condense the steam back into water f

  • Answered by AI
  • Q2. What salary you prefers?

Interview Preparation Tips

Interview preparation tips for other job seekers - Always prepare about the company .
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Self introduction, Personalty test
Round 3 - Technical 

(2 Questions)

  • Q1. Thermodynamics laws, Type of Gears And Bearings
  • Ans. 

    Thermodynamics laws, types of gears and bearings

    • Thermodynamics laws include the first law (conservation of energy), second law (entropy always increases), and third law (absolute zero is unattainable)

    • Types of gears include spur, helical, bevel, worm, and rack and pinion

    • Types of bearings include ball bearings, roller bearings, and plain bearings

    • Gears and bearings are commonly used in machinery and mechanical systems

  • Answered by AI
  • Q2. Measurement, Heat treatment,

I applied via Walk-in

Round 1 - Technical 

(1 Question)

  • Q1. What is your current role and responsibility
Round 2 - One-on-one 

(1 Question)

  • Q1. Why you are leaving your current job

Interview Preparation Tips

Interview preparation tips for other job seekers - Please ready with all technical answer with weel study
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Some normal calculation skill and english reading tecnical questions leat count of vernier about quality mesurment instument production type cnc vmc tyes of machining its all basic
  • Q2. Ony aree to any condion i will work

Interview Preparation Tips

Interview preparation tips for other job seekers - its all basics good for earning somthing
seniougood rs also friendly good working cluture
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Apr 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Total number of marks is 20 , required passing marks is 16,

Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell us about ohm's law
  • Ans. 

    Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, given constant resistance.

    • Ohm's law is represented by the formula V = IR, where V is voltage, I is current, and R is resistance.

    • It is named after German physicist Georg Simon Ohm.

    • It is commonly used in electrical engineering to calculate the relationship between voltage, current, and resistance.

    • Ohm's law is ...

  • Answered by AI
  • Q2. How many types of transformer
  • Ans. 

    There are mainly two types of transformers: Step-up transformers and Step-down transformers.

    • Step-up transformers increase the voltage from primary to secondary winding.

    • Step-down transformers decrease the voltage from primary to secondary winding.

    • Examples include power transformers, distribution transformers, and instrument transformers.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Not to good nor bad

Shriram Pistons & Rings Interview FAQs

How many rounds are there in Shriram Pistons & Rings Diploma Trainee Engineer interview?
Shriram Pistons & Rings interview process usually has 3 rounds. The most common rounds in the Shriram Pistons & Rings interview process are Technical and Aptitude Test.
How to prepare for Shriram Pistons & Rings Diploma Trainee Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Shriram Pistons & Rings. The most common topics and skills that interviewers at Shriram Pistons & Rings expect are Daily Production Planning, Manpower Handling, Process Improvement, Production and Production Management.
What are the top questions asked in Shriram Pistons & Rings Diploma Trainee Engineer interview?

Some of the top questions asked at the Shriram Pistons & Rings Diploma Trainee Engineer interview -

  1. 1.Working of mech. Braking system. 2.Material of piston and connecting rod 3.w...read more
  2. Egg drawing & ic eng...read more
  3. Machines & process rela...read more

Tell us how to improve this page.

Shriram Pistons & Rings Diploma Trainee Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
Shriram Pistons & Rings Diploma Trainee Engineer Salary
based on 13 salaries
₹1.2 L/yr - ₹3.1 L/yr
At par with the average Diploma Trainee Engineer Salary in India
View more details

Shriram Pistons & Rings Diploma Trainee Engineer Reviews and Ratings

based on 13 reviews

3.0/5

Rating in categories

3.5

Skill development

2.7

Work-life balance

2.6

Salary

3.5

Job security

3.1

Company culture

2.7

Promotions

2.8

Work satisfaction

Explore 13 Reviews and Ratings
Senior Associate Engineer
249 salaries
unlock blur

₹2.6 L/yr - ₹7 L/yr

Associate Engineer
146 salaries
unlock blur

₹2 L/yr - ₹5.4 L/yr

Assistant Manager
137 salaries
unlock blur

₹8.5 L/yr - ₹20.1 L/yr

Senior Engineer
137 salaries
unlock blur

₹3.8 L/yr - ₹14.5 L/yr

Assistant Engineer
127 salaries
unlock blur

₹3.6 L/yr - ₹9 L/yr

Explore more salaries
Compare Shriram Pistons & Rings with

JBM Group

4.0
Compare

Subros

3.8
Compare

Endurance Technologies

3.9
Compare

Spark Minda

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview