AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Shriram Pistons & Rings Production Engineer Interview Questions and Answers
Shriram Pistons & Rings Production Engineer Interview Experiences
2 interviews found
Anonymous
I applied via Naukri.com and was interviewed before Sep 2020. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. Work culture in shriram pistons
- Ans.
Shriram Pistons has a positive and collaborative work culture that encourages innovation and growth.
The company values teamwork and encourages employees to work together to achieve common goals.
There is a focus on continuous learning and development, with opportunities for training and skill-building.
The management is approachable and supportive, and there is a sense of transparency and open communication.
The company a...
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed in Jun 2019. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. About training from CV
- Q2. What is responsibility in your current company, if other past experience as well as
- Ans.
In my current company, I am responsible for overseeing the production process, ensuring efficiency and quality standards are met.
Overseeing the production process to ensure smooth operations
Implementing and monitoring quality control measures
Optimizing production efficiency and reducing costs
Collaborating with other departments to coordinate production schedules
Troubleshooting any issues that arise during production
Tra...
- Q3. Technical basic knowledge should be confidently
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Walk-in and was interviewed before May 2021. There were 4 interview rounds.
Group discussed on Di
scipline spelling topic and explain
(1 Question)
- Q1. Self introduction explain
(1 Question)
- Q1. Explain and overall experience
(1 Question)
- Q1. Discipline and working hour and salary discuss
Interview Preparation Tips
I applied via Job Fair and was interviewed before Mar 2021. There were 4 interview rounds.
Topic for discussion
(2 Questions)
- Q1. Technical education in subject
- Q2. Diploma realated couse
(5 Questions)
- Q1. What is your family background?
- Q2. What are your strengths and weaknesses?
- Ans.
My strengths include problem-solving, attention to detail, and strong technical skills. My weaknesses include being overly critical of my own work and sometimes struggling with delegation.
Strength: Problem-solving - I enjoy analyzing complex problems and finding efficient solutions.
Strength: Attention to detail - I have a meticulous approach to my work, ensuring accuracy and quality.
Strength: Strong technical skills - ...
- Q3. Tell me about yourself.
- Q4. I am Shivam Singh and graduation complete in Mechanical Engineering and also done my diploma mechanical automobile in ghaziabad
- Q5. I am hardworking I am honesty I am work in complete in time
Interview Preparation Tips
I applied via Walk-in and was interviewed before Sep 2020. There was 1 interview round.
Interview Questionnaire
8 Questions
- Q1. Tell me about yourself.
- Ans.
I am a production engineer with experience in optimizing manufacturing processes and ensuring efficient production.
Experienced production engineer
Skilled in optimizing manufacturing processes
Ensuring efficient production
Strong knowledge of production equipment and technologies
Proficient in analyzing data and implementing improvements
Collaborative team player
- Q2. What is your position in previous company ?
- Ans.
I was a Senior Production Engineer in my previous company.
I held the position of Senior Production Engineer.
I was responsible for overseeing production processes and ensuring efficiency.
I worked closely with the production team to identify and resolve any issues.
I implemented improvements to optimize production output and reduce costs.
I collaborated with other departments to coordinate production schedules and meet dea...
- Q3. What is your role in it ?
- Ans.
As a Production Engineer, my role is to oversee the manufacturing process, optimize production efficiency, and ensure quality control.
Overseeing the manufacturing process
Optimizing production efficiency
Ensuring quality control
Identifying and resolving production issues
Implementing process improvements
Collaborating with cross-functional teams
Monitoring production metrics and analyzing data
Creating and maintaining produc
- Q4. As a Jr. Quality Engineer. I have checked raw materials inspection, Dimensional inspection of job with respect to revised drawings, Leak test of job, Blasting & painting , And quality related issues with t...
- Q5. What is the full form of DFT in painting ?
- Ans.
DFT in painting stands for Dry Film Thickness.
DFT is the thickness of the paint film after it has dried.
It is measured using a coating thickness gauge.
The DFT is important for ensuring proper protection and appearance of the painted surface.
For example, a coating may require a minimum DFT of 2 mils to provide adequate corrosion protection.
DFT can also affect the drying time and curing of the paint.
- Q6. Dry Film Thickness.
- Ans.
Dry film thickness refers to the thickness of a coating after it has dried and cured.
It is measured using a coating thickness gauge.
It is important to ensure that the dry film thickness meets the specifications for the coating.
The dry film thickness can affect the performance and durability of the coating.
Examples of coatings that require specific dry film thickness include paint, powder coating, and plating.
Dry film t...
- Q7. What if the DFT is more than requirement ?
- Ans.
Excess DFT can lead to increased cost and longer production time.
Excess DFT can lead to increased material usage and waste.
It can also lead to longer production time and increased cost.
The excess DFT may also affect the performance and durability of the product.
It is important to ensure that the DFT is within the specified range to avoid these issues.
- Q8. There is a peel off and rundown in the job as DFT is more than requirement.
Interview Preparation Tips
I applied via Job Fair and was interviewed before Mar 2021. There were 2 interview rounds.
I am graduation in Mechanical Engineering and also done my diploma mechanical automobile in ghaziabad
(1 Question)
- Q1. Tell me about yourself.
Interview Preparation Tips
I applied via Job Fair and was interviewed before Mar 2021. There were 2 interview rounds.
I am graduation in Mechanical Engineering and also done my diploma mechanical automobile in ghaziabad
(1 Question)
- Q1. Tell me about yourself.
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Mar 2021. There were 3 interview rounds.
(2 Questions)
- Q1. Face to face depend on interview skill and confidence
- Q2. Skill and communication in the opportunity in the company
(2 Questions)
- Q1. Why should we hire you?
- Ans.
I have a strong background in production engineering and a proven track record of improving efficiency and reducing costs.
I have a Bachelor's degree in Production Engineering and have completed internships at two leading manufacturing companies.
I have successfully implemented process improvements that resulted in a 20% increase in production output at my previous job.
I am skilled in using various production software an...
- Q2. I am working in denso India pvt Ltd I am working in honsety and I am also good confidence and hardworking
Interview Preparation Tips
Selected
I applied via AmbitionBox
(2 Questions)
- Q1. Hr asked me basic introduction and family background apart from this qualifications
- Q2. Hr asked me about initiation process and end deployment till production
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed in Sep 2023. There were 2 interview rounds.
(5 Questions)
- Q1. HR, aptitude test, group discussion
- Q2. One on one round
- Q3. Group discussion
- Q4. Aptitude test and HR
- Q5. One on one round in technical
Shriram Pistons & Rings Interview FAQs
Tell us how to improve this page.
Shriram Pistons & Rings Interviews By Designations
- Shriram Pistons & Rings Senior Engineer Interview Questions
- Shriram Pistons & Rings Trainee Interview Questions
- Shriram Pistons & Rings Senior Assistant Engineer Interview Questions
- Shriram Pistons & Rings Diploma Trainee Engineer Interview Questions
- Shriram Pistons & Rings Production Engineer Interview Questions
- Shriram Pistons & Rings Associate Engineer Interview Questions
- Shriram Pistons & Rings MSR-Mechanic Sales Representative Interview Questions
- Shriram Pistons & Rings Shift Incharge Interview Questions
- Show more
Interview Questions for Popular Designations
- Production Supervisor Interview Questions
- Production Manager Interview Questions
- Production Officer Interview Questions
- Executive Production Interview Questions
- Production Interview Questions
- Senior Production Engineer Interview Questions
- Production Chemist Interview Questions
- Production Operator Interview Questions
- Show more
Shriram Pistons & Rings Production Engineer Interview Process
based on 2 interviews
Interview experience
Production Engineer Interview Questions from Similar Companies
Fast track your campus placements
Shriram Pistons & Rings Production Engineer Reviews and Ratings
based on 15 reviews
Rating in categories
|
Senior Associate Engineer
249
salaries
|  ₹2.6 L/yr - ₹7 L/yr |
|
Associate Engineer
146
salaries
| ₹2 L/yr - ₹5.4 L/yr |
|
Assistant Manager
137
salaries
| ₹8.5 L/yr - ₹20.1 L/yr |
|
Senior Engineer
137
salaries
| ₹3.8 L/yr - ₹14.5 L/yr |
|
Assistant Engineer
127
salaries
| ₹3.6 L/yr - ₹9 L/yr |
JBM Group
Subros
Endurance Technologies
Spark Minda
- Home >
- Interviews >
- Shriram Pistons & Rings Interview Questions >
- Shriram Pistons & Rings Production Engineer Interview Questions
