Add office photos
Filter interviews by
Shah & Talati Consulting Engineers, (Baroda) Structural Design Engineer Interview Questions and Answers
Shah & Talati Consulting Engineers, (Baroda) Structural Design Engineer Interview Experiences
1 interview found
Selected
I applied via Newspaper Ad and was interviewed before Sep 2022. There were 3 interview rounds.
(3 Questions)
- Q1. Basic Structural philosophy theory question
- Q2. Design steps of RC framed structure
- Ans.
Design steps of RC framed structure involve planning, analysis, design, detailing, and construction.
1. Planning phase involves determining the purpose, load requirements, and constraints of the structure.
2. Analysis phase includes calculating loads, determining member sizes, and selecting materials.
3. Design phase involves creating structural drawings, detailing reinforcement, and ensuring stability.
4. Detailing phase ...
- Q3. Design sreps of steel structure
- Ans.
Design steps of steel structure involve planning, analysis, detailing, and construction.
Start with understanding the project requirements and constraints
Perform structural analysis to determine loads and stresses
Select appropriate steel sections and connections
Create detailed drawings and specifications for fabrication and construction
Ensure compliance with relevant codes and standards
Collaborate with architects, contr...
(1 Question)
- Q1. Interview question related to past experience & taken software related task.
Top trending discussions
Interview questions from similar companies
Senior Structural Designer Interview Questions & Answers
Tech Mahindra
Anonymous
posted on 6 Aug 2024
I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.
(5 Questions)
- Q1. Tell me something about yourself
- Ans.
I am a highly experienced structural designer with a passion for creating innovative and efficient solutions.
Over 10 years of experience in structural design
Proficient in CAD software and structural analysis tools
Strong problem-solving skills and attention to detail
Completed several high-profile projects such as [example project 1] and [example project 2]
- Q2. What is your strength and weakness
- Ans.
My strength is attention to detail and my weakness is sometimes being too critical of my own work.
Strength: Attention to detail - I always ensure that every aspect of my design is thoroughly checked and accurate.
Weakness: Being too critical of my own work - I tend to overanalyze my designs, which can sometimes slow down the process.
Weakness: Time management - I sometimes struggle with prioritizing tasks and managing my...
- Q3. Hai sir / madam Thankyou for giving me this opportunity My self Sowmya
- Q4. Mental strong . Hopeful
- Q5. Sensitive . Trust people very Quickly
Interview Preparation Tips
You will hear us say so often in this office and it truly just gets to the heart so I would say that's number one .
Rushikesh Patne
I applied via Walk-in and was interviewed in Aug 2023. There was 1 interview round.
(5 Questions)
- Q1. Design of one way slab
- Ans.
One way slab is a type of reinforced concrete slab where the main reinforcement is provided in only one direction.
Main reinforcement is provided in the shorter span direction
Distribution bars are provided in the longer span direction
Commonly used in buildings with rectangular floor plans
- Q2. Difference between short column and long column
- Ans.
Short columns fail due to crushing of material, while long columns fail due to buckling.
Short columns have a slenderness ratio less than a certain critical value, while long columns have a slenderness ratio greater than that value.
Short columns are more likely to fail in compression, while long columns are more likely to fail in buckling.
Examples of short columns include columns in buildings, while examples of long col
- Q3. Design of two way slab
- Ans.
Two way slab is a type of reinforced concrete slab that is supported by beams in both directions.
Two way slab is designed to carry loads in both directions, typically used in buildings with square or rectangular floor plans.
The design of two way slab involves determining the thickness, reinforcement layout, and spacing of bars to ensure structural integrity.
The slab is supported by beams on all four sides, allowing for...
- Q4. Design of staircase
- Ans.
Designing a staircase involves considering factors such as building codes, safety regulations, space constraints, and aesthetic appeal.
Consider the height and width of each step to ensure comfortable and safe use.
Calculate the rise and run of the staircase to determine the number of steps needed.
Choose a suitable material for the staircase based on the design requirements and budget.
Ensure proper handrails and guardrai...
- Q5. Wind load calculations
Interview Preparation Tips
(1 Question)
- Q1. What I know about in technical theory ?
- Ans.
Technical theory in structural engineering involves understanding principles of mechanics, materials, and design to analyze and design structures.
Understanding of structural analysis methods such as finite element analysis
Knowledge of material properties and behavior under different loading conditions
Familiarity with building codes and regulations for structural design
Ability to interpret and apply engineering principl
I applied via campus placement at National Institute of Technology (NIT), Silchar and was interviewed in Jan 2023. There were 4 interview rounds.
Normal apti questions, there were asked in objective type questions
(1 Question)
- Q1. Normal technical question were asked
(1 Question)
- Q1. Just asked about the family, strength, weakness, family background etc
Interview Preparation Tips
Shah & Talati Consulting Engineers, (Baroda) Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Structural Engineer Interview Questions
- Civil Structural Engineer Interview Questions
- Senior Structural Engineer Interview Questions
- Junior Structural Engineer Interview Questions
- Senior Structural Design Engineer Interview Questions
- Civil Structural Designer Interview Questions
- Structural Steel Detailer Interview Questions
- Civil Structural Design Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
|
Architect
7
salaries
|  ₹4 L/yr - ₹16.5 L/yr |
|
Project Engineer
4
salaries
| ₹7.5 L/yr - ₹8.5 L/yr |
|
Project Coordinator
4
salaries
| ₹10 L/yr - ₹13 L/yr |
|
Structural Design Engineer
4
salaries
| ₹2.5 L/yr - ₹7.4 L/yr |
|
Design Engineer
3
salaries
| ₹4.5 L/yr - ₹6.2 L/yr |
TCE
Mecon
L&T Energy Hydrocarbon
TechnipFMC
Calculate your in-hand salary
- Home >
- Interviews >
- Shah & Talati Consulting Engineers, (Baroda) Interview Questions >
- Shah & Talati Consulting Engineers, (Baroda) Structural Design Engineer Interview Questions
