Upload Button Icon Add office photos

SGS

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

SGS Executive - Sales & Marketing Interview Questions and Answers

Updated 5 Dec 2024

SGS Executive - Sales & Marketing Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. You need good technical knowledge
Round 2 - HR 

(1 Question)

  • Q1. Hr is for only salary negotiation

Interview Preparation Tips

Interview preparation tips for other job seekers - If you have great communications skills then you are right choice for SGS india

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Tell me about yourself and Experience details.

Interview Preparation Tips

Interview preparation tips for other job seekers - They ask in depth of previous experience need to be through with Theriotical knowledge. Join only if you have no other option.

I applied via Referral and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Salary expectation
  • Ans. As my expectation attractive will given.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical, strong management and good behaviour and mankind.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What are documents required for the inspection of material and work
  • Ans. 

    The documents required for the inspection of material and work include specifications, drawings, test plans, inspection reports, and certificates.

    • Specifications: Provide detailed information about the required standards and quality of the material and work.

    • Drawings: Illustrate the design and dimensions of the material and work to be inspected.

    • Test plans: Outline the procedures and criteria for conducting tests on the m...

  • Answered by AI
  • Q2. How will you do the inspection of transformer before commissioning.
  • Ans. 

    Before commissioning a transformer, inspection can be done by following these steps:

    • Check for any physical damage or signs of overheating on the transformer

    • Inspect the insulation system for any signs of degradation or contamination

    • Verify the correct installation of all components and connections

    • Perform electrical tests to ensure proper functioning and performance

    • Check the oil level and quality in oil-filled transformer...

  • Answered by AI

I applied via Naukri.com and was interviewed in Jun 2022. There were 8 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. What is your experience ex-company .
Round 3 - Technical 

(1 Question)

  • Q1. Who is the department
  • Ans. Tata chemicals Ltd. And TUV SUD Pvt. Ltd.
  • Answered Anonymously
Round 4 - Technical 

(1 Question)

  • Q1. I have experience in technical.
  • Ans. Give me one chance for this job .
  • Answered Anonymously
Round 5 - One-on-one 

(1 Question)

  • Q1. This is the same job.
  • Ans. Yes, give me one round chance.
  • Answered Anonymously
Round 6 - Aptitude Test 

Your experience of ex-company so other wise test submit.

Round 7 - Group Discussion 

Group discussion is the very important .

Round 8 - Group Discussion 

TUV SUD is the good company.

Interview Preparation Tips

Interview preparation tips for other job seekers - TUV SUD the good company . And give me one chance othe project.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected
Round 1 - Technical 

(2 Questions)

  • Q1. Material specification, Details, drawings, code references.
  • Q2. How to prepare welder qualification as per asme?
  • Ans. 

    To prepare welder qualification as per ASME, follow ASME Section IX guidelines, conduct welder performance qualification tests, and maintain records.

    • Follow ASME Section IX guidelines for welder qualification

    • Conduct welder performance qualification tests such as visual examination, bend test, and radiographic testing

    • Maintain records of welder qualifications and requalification tests

    • Ensure welders are trained and certifi...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Variables, P No?
Round 3 - HR 

(1 Question)

  • Q1. Salary expectation?
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Related to gas pipeline
  • Q2. What is required data for fire & safety
  • Ans. 

    Data required for fire & safety

    • Building layout and floor plans

    • Location of fire exits and emergency equipment

    • Fire suppression systems and equipment

    • Fire alarm and detection systems

    • Emergency response plan and procedures

  • Answered by AI
  • Q3. In which type of fitting use during charging
  • Ans. 

    Fittings used during charging depend on the type of refrigerant and system design.

    • The type of refrigerant and system design determine the fittings used during charging.

    • Common fittings include flare, sweat, and quick-connect fittings.

    • Flare fittings are commonly used in air conditioning systems.

    • Sweat fittings are commonly used in refrigeration systems.

    • Quick-connect fittings are commonly used in automotive air conditionin...

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. What is depth required fir igl has laying
  • Ans. 

    The depth required for IGL gas laying depends on various factors such as soil type, traffic load, and depth of other utilities.

    • The depth should be sufficient to prevent damage from external factors such as traffic load and soil type.

    • The depth should also be deep enough to avoid interference with other utilities.

    • The depth requirement may vary depending on the location and local regulations.

    • For example, in Delhi, the min...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Gas fitting code for tee, elbow, what are thing required during charging, commissioning etc
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. Q- about current salary and expected salary?
  • Ans. 

    It is important to discuss current and expected salary during the interview process.

    • Be honest and transparent about your current salary.

    • Research the market rates for the position and industry to determine a reasonable expected salary.

    • Consider factors such as your experience, qualifications, and the responsibilities of the role when discussing expected salary.

    • Highlight any additional skills or certifications that may ju...

  • Answered by AI
  • Q2. Q- reason why are you change the job?
  • Ans. 

    I am changing jobs for better career growth and opportunities.

    • Seeking new challenges and opportunities to expand my skills and knowledge.

    • Looking for a company that aligns with my values and offers a better work-life balance.

    • Wanting to work in a more dynamic and innovative environment.

    • Desire to take on more responsibilities and contribute to larger projects.

    • Seeking better career growth and advancement opportunities.

    • Want...

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. Q. Types of valve and it's function?
  • Ans. 

    Valves are devices used to control the flow of fluids or gases in a system.

    • Gate valve: used to start or stop the flow of fluid by lifting or lowering a gate

    • Ball valve: uses a rotating ball with a hole to control the flow

    • Check valve: allows flow in one direction and prevents backflow

    • Globe valve: controls flow by raising or lowering a disc against the flow

    • Butterfly valve: uses a disc to control flow by rotating it

  • Answered by AI
  • Q2. Q. QAP, WPS and DFT description?
  • Ans. 

    QAP, WPS, and DFT are important documents used in inspection engineering.

    • QAP stands for Quality Assurance Plan, which outlines the procedures and requirements for ensuring quality in a project or process.

    • WPS stands for Welding Procedure Specification, which provides detailed instructions for performing welding operations.

    • DFT stands for Dry Film Thickness, which refers to the thickness of a coating or paint applied to a...

  • Answered by AI
  • Q3. Q. What is represented by W,H,R,P and V?
  • Ans. 

    W, H, R, P, and V represent different variables or parameters.

    • W could represent weight or width

    • H could represent height

    • R could represent radius

    • P could represent pressure

    • V could represent volume

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Intertek Inspection Engineer interview:
  • NDT Inspection
  • ASME Codes

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Last salary & Work Experience

I applied via Naukri.com and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. What's your last experience
  • Q2. What's your current ctc
  • Q3. Are you married

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and ans all question confidently
Contribute & help others!
anonymous
You can choose to be anonymous

SGS Interview FAQs

How many rounds are there in SGS Executive - Sales & Marketing interview?
SGS interview process usually has 2 rounds. The most common rounds in the SGS interview process are Technical and HR.
What are the top questions asked in SGS Executive - Sales & Marketing interview?

Some of the top questions asked at the SGS Executive - Sales & Marketing interview -

  1. Hr is for only salary negotiat...read more
  2. You need good technical knowle...read more

Recently Viewed

INTERVIEWS

Pepperfry

No Interviews

INTERVIEWS

Profectus Capital

No Interviews

INTERVIEWS

Kores

No Interviews

INTERVIEWS

Assurant

No Interviews

INTERVIEWS

Kores

No Interviews

INTERVIEWS

Aptech

No Interviews

INTERVIEWS

Assurant

No Interviews

INTERVIEWS

Medhaj Techno Concept

No Interviews

INTERVIEWS

Pepperfry

No Interviews

INTERVIEWS

SGS

No Interviews

Tell us how to improve this page.

SGS Executive - Sales & Marketing Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Bureau Veritas Interview Questions
3.9
 • 113 Interviews
TÜV NORD Interview Questions
3.8
 • 62 Interviews
TÜV SÜD Interview Questions
3.9
 • 60 Interviews
CMS Infosystems Interview Questions
3.6
 • 54 Interviews
Intertek Interview Questions
3.8
 • 50 Interviews
Cashify Interview Questions
3.8
 • 39 Interviews
Titan Eye Plus Interview Questions
4.2
 • 30 Interviews
View all
SGS Executive - Sales & Marketing Salary
based on 4 salaries
₹4 L/yr - ₹6.5 L/yr
54% more than the average Executive - Sales & Marketing Salary in India
View more details

SGS Executive - Sales & Marketing Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

3.0

Salary

4.0

Job security

5.0

Company culture

3.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Inspection Engineer
465 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Chemist
300 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
232 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
175 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
118 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare SGS with

Bureau Veritas

3.9
Compare

Intertek

3.8
Compare

TÜV SÜD

3.9
Compare

DNV GL

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview