Add office photos
i
Servotech Power Systems
Compare
Filter interviews by
Servotech Power Systems Junior Engineer Production Interview Questions and Answers
Servotech Power Systems Junior Engineer Production Interview Experiences
1 interview found
Selected
I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.
(4 Questions)
- Q1. Star delta connection
- Q2. Faraday law of Electromagnetism
- Ans.
Faraday's law of electromagnetism states that a changing magnetic field induces an electromotive force in a conductor.
An electromotive force is induced in a conductor when there is a change in magnetic field strength or orientation.
This phenomenon is the basis for the operation of generators and transformers.
Faraday's law is mathematically represented as E = -dΦ/dt, where E is the induced electromotive force and Φ is t...
- Q3. Define Kirchhoff law
- Ans.
Kirchhoff's law states that the total current entering a junction is equal to the total current leaving the junction.
Kirchhoff's Current Law (KCL) states that the algebraic sum of currents entering a node is zero.
Kirchhoff's Voltage Law (KVL) states that the sum of voltage drops in a closed loop is equal to the applied voltage.
KCL is based on the principle of conservation of charge, while KVL is based on the conservati...
- Q4. Power Electronics Components like Transistor.Bjt fet Mosfet diode l.
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Ankit Mishra
(2 Questions)
- Q1. Technical questions also interview
- Q2. Non technical questions also interview
Interview Preparation Tips
Naman Arora
Selected
I applied via campus placement at University of Petroleum and Energy Studies (UPES), Dehradun and was interviewed in Aug 2023. There were 3 interview rounds.
It was nearly 3 test for 3 hrs.
My topic was ott vs theatre.
(5 Questions)
- Q1. Read about the company on LinkedIn and revise all your core subjects.
- Q2. Different types of cables produced by kei industries?
- Ans.
KEI Industries produces a variety of cables including power cables, control cables, instrumentation cables, and specialty cables.
Power cables
Control cables
Instrumentation cables
Specialty cables
- Q3. What are high voltage cables?
- Ans.
High voltage cables are cables designed to carry high levels of electrical energy safely.
High voltage cables are insulated to prevent electrical leakage and ensure safety.
They are used to transmit electricity over long distances with minimal power loss.
Examples include power lines used for transmitting electricity from power plants to homes and businesses.
- Q4. What is ohm meter?
- Ans.
An ohm meter is a device used to measure electrical resistance in a circuit.
Measures the resistance of a circuit in ohms
Helps in troubleshooting electrical issues
Can be used to test the continuity of a circuit
Commonly used in electronics and electrical engineering
- Q5. Maximum Voltage of cables produced by kei industries?
- Ans.
The maximum voltage of cables produced by KEI Industries is 1100V.
KEI Industries produces cables with a maximum voltage of 1100V.
The cables are designed to handle high voltage applications.
These cables are commonly used in industrial and commercial settings.
KEI Industries ensures quality and safety standards in their cable production.
Production Operator Interview Questions & Answers
SasMos HET Technologies
Ram Pravesh Pandit
posted on 15 Apr 2024
(3 Questions)
- Q1. What is your interested field
- Ans.
My interested field is in manufacturing and production processes.
I have a strong interest in optimizing production efficiency and quality control.
I enjoy working with machinery and understanding how different components come together to create a final product.
I have experience in lean manufacturing principles and continuous improvement techniques.
I am always looking for ways to streamline processes and reduce waste in
- Q2. Give me the experience of work
- Ans.
I have 5 years of experience working as a Production Operator in a manufacturing plant.
Operated machinery and equipment to produce high-quality products
Followed safety protocols and procedures to ensure a safe working environment
Performed quality checks and inspections to maintain product standards
Collaborated with team members to meet production goals
Troubleshooted equipment issues and performed minor maintenance task
- Q3. What is basic electronics components
- Ans.
Basic electronics components are fundamental parts used in electronic circuits to control the flow of electricity.
Resistors: limit the flow of current
Capacitors: store and release electrical energy
Diodes: allow current to flow in one direction
Transistors: amplify or switch electronic signals
Inductors: store energy in a magnetic field
Executive Production Interview Questions & Answers
CG Power and Industrial Solutions
Anonymous
posted on 12 Mar 2024
Selected
(1 Question)
- Q1. Material treatment before powder coating
- Ans.
Material treatment before powder coating involves cleaning, degreasing, and surface preparation to ensure adhesion and durability.
Cleaning the surface to remove any dirt, oil, or contaminants
Degreasing to eliminate any oils or grease that could interfere with adhesion
Surface preparation such as sanding or blasting to create a rough surface for better adhesion
Applying a conversion coating to improve corrosion resistance
...
(1 Question)
- Q1. Tell me about yourself
Interview Questionnaire
3 Questions
- Q1. What is 7 qc tools
- Ans.
The 7 QC tools are a set of basic quality control tools used to identify and solve quality problems.
The tools include: Pareto chart, cause-and-effect diagram, check sheet, control chart, histogram, scatter diagram, and flowchart.
They are used to analyze data, identify trends, and solve problems in manufacturing, service, and other industries.
For example, a Pareto chart can be used to identify the most common causes of ...
- Q2. What is 7 step of quality control
- Ans.
The 7 steps of quality control involve planning, design, development, testing, implementation, maintenance, and improvement.
Step 1: Planning - Define the objectives and requirements of the project.
Step 2: Design - Create a detailed plan for the project.
Step 3: Development - Build the project according to the plan.
Step 4: Testing - Verify that the project meets the requirements.
Step 5: Implementation - Deploy the projec...
- Q3. What is capa
- Ans.
Capa is a term used in engineering to refer to the maximum amount of load or weight that a structure or material can withstand.
Capa is short for capacity.
It is important to know the capa of a material or structure to ensure it can handle the intended load.
Capa can be affected by factors such as temperature, humidity, and age.
Examples of capa include the weight a bridge can hold, the load a crane can lift, and the maxim
Interview Preparation Tips
I applied via Campus Placement and was interviewed in Dec 2021. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. What is FSH and where is this used
- Ans. In cable for fire resistance.
Interview Preparation Tips
Production Supervisor Interview Questions & Answers
East India Udyog
Anonymous
posted on 26 Sep 2021
I applied via Walk-in and was interviewed in Sep 2021. There was 1 interview round.
Interview Questionnaire
6 Questions
- Q1. Production regards
- Q2. Production manpower handling
- Q3. Quality regarding
- Q4. Five s regards
- Q5. Handling process
- Q6. Sefty regards
Interview Preparation Tips
I applied via Recruitment Consulltant and was interviewed before Jun 2021. There was 1 interview round.
(2 Questions)
- Q1. Psc pole ka depth kitana hota hai.
- Q2. Dog kitane sqm ka hota hai.
Interview Preparation Tips
So, i am requesting to job speakers please provide give me a job.
Selected
I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.
(4 Questions)
- Q1. SAP knowledge &
- Q2. Production output
- Q3. Material inventory
- Q4. Line balancing etc
Servotech Power Systems Interview FAQs
Tell us how to improve this page.
Servotech Power Systems Interviews By Designations
- Servotech Power Systems Project Engineer Interview Questions
- Servotech Power Systems Accountant Interview Questions
- Servotech Power Systems Area Service Incharge Interview Questions
- Servotech Power Systems Business Development Manager Interview Questions
- Servotech Power Systems Electrical Project Engineer Interview Questions
- Servotech Power Systems Executive Interview Questions
- Servotech Power Systems Junior Engineer Production Interview Questions
- Servotech Power Systems R&D Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Production Engineer Interview Questions
- Production Supervisor Interview Questions
- Production Manager Interview Questions
- Production Officer Interview Questions
- Junior Production Officer Interview Questions
- Executive Production Interview Questions
- Production Interview Questions
- Junior Executive Production Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Servotech Power Systems Junior Engineer Production Reviews and Ratings
based on 1 review
Rating in categories
|
Project Engineer
24
salaries
|  ₹2 L/yr - ₹4.2 L/yr |
|
Service Engineer
13
salaries
| ₹2.4 L/yr - ₹3.2 L/yr |
|
Assistant Manager
12
salaries
| ₹4.2 L/yr - ₹6.2 L/yr |
|
Project Coordinator
12
salaries
| ₹2.7 L/yr - ₹4.1 L/yr |
|
Quality Engineer
11
salaries
| ₹2 L/yr - ₹4.5 L/yr |
Kirloskar Electric Company
BHEL
CG Power and Industrial Solutions
Siemens
Calculate your in-hand salary
- Home >
- Interviews >
- Servotech Power Systems Interview Questions >
- Servotech Power Systems Junior Engineer Production Interview Questions
