Upload Button Icon Add office photos

Filter interviews by

Rane NSK Steering Systems Diploma Mechanical Engineer Interview Questions and Answers

Updated 3 Oct 2023

Rane NSK Steering Systems Diploma Mechanical Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What are you vernier caliper least caunt
  • Ans. 

    The least count of a vernier caliper is the smallest measurement that can be read on the scale.

    • The least count of a vernier caliper is typically 0.02 mm or 0.001 inches.

    • It is determined by the number of divisions on the main scale and the vernier scale.

    • For example, if the main scale has 20 divisions and the vernier scale has 10 divisions, the least count would be 0.02 mm.

  • Answered by AI
  • Q2. What are you maicrometer least caunt
  • Ans. 

    The question seems to be asking about the least count of a micrometer.

    • The least count of a micrometer is the smallest measurement that can be read or measured using the device.

    • It is typically determined by the number of divisions on the thimble and the pitch of the screw.

    • For example, if a micrometer has 50 divisions on the thimble and a pitch of 0.5 mm, the least count would be 0.01 mm.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Telephonic Call 

(1 Question)

  • Q1. Technical questions related to Mechanical Engineering. Current job role and responsibilities
Round 3 - Panel interview 

(2 Questions)

  • Q1. Current job role and responsibilities.
  • Q2. What is Tempering? Material science questions
Round 4 - One-on-one 

(2 Questions)

  • Q1. Interview with VP India.
  • Q2. Questions on Combustion Engines. Difference between two-stroke and four-stroke. Current job role and responsibilities. How to design a snap.

Interview Preparation Tips

Interview preparation tips for other job seekers - Know your profile well. Brush up on Mechanical engineering topics
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Introduction of ypur
  • Ans. 

    I am a highly experienced Sr. Engineer with a strong background in various engineering disciplines.

    • Over 10 years of experience in mechanical, electrical, and civil engineering

    • Led multiple successful projects from concept to completion

    • Proficient in CAD software such as AutoCAD and SolidWorks

  • Answered by AI
  • Q2. Salary discussion and discussion about pearks.
Round 3 - Technical 

(2 Questions)

  • Q1. Your kra and dwm Discussion related to your work field.
  • Q2. Why we select you ,what is your goods & bad,

Interview Preparation Tips

Topics to prepare for Krishna Maruti Senior Engineer interview:
  • Line balacing
  • Lean Manufacturing Tools
  • 4m change
  • Redbin analysis
  • Rejection Control
  • Productivity Improvement
  • OEE Calculation
  • Kaizen Implementation
  • 5S System
  • Breakdown Analysis
  • Process parameters
  • Measuring instrument
  • MSA
  • SPC Study
Interview preparation tips for other job seekers - Interviewer is just seeking a experience holder who is having relevant knowledge. And uses the key tells
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. How are you ?
  • Q2. Where do you live
  • Q3. How mch experiance you have
  • Ans. 

    I have 8 years of experience in the field of engineering.

    • I have worked in various engineering roles for 8 years

    • I have experience in project management, design, and implementation

    • I have successfully completed multiple engineering projects

    • I have received positive feedback and recognition for my work

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep searchi new jobs
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is cycle time?
  • Ans. 

    Cycle time is the total time taken to complete a process or task from start to finish.

    • Cycle time is a key metric in process improvement and efficiency analysis.

    • It helps in identifying bottlenecks and areas for improvement in a process.

    • For example, in manufacturing, cycle time can refer to the time taken to produce one unit of a product.

    • Reducing cycle time can lead to increased productivity and cost savings.

  • Answered by AI
  • Q2. What is line balancing
  • Ans. 

    Line balancing is the process of assigning tasks to workstations in a way that evens out the workload and maximizes efficiency.

    • Involves distributing work evenly among workstations

    • Helps in reducing idle time and bottlenecks

    • Improves productivity and efficiency

    • Example: In a manufacturing plant, line balancing ensures each workstation has a similar amount of work to do

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Scm role and responsibilities
  • Q2. Earlier experience and roles
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Injection molding process
  • Q2. Six step study ,
  • Ans. Gate freeze, holding, pressure drop, viscosity, cooling or dimensions study.
  • Answered by Mohammad Ali

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge in robo better

Interview Questionnaire 

4 Questions

  • Q1. When you apply for the Post of Sr Engineer, they expect a professional answer from your field. Since I was from a tooling background, they asked me few questions which were not very tricky so I answered th...
  • Q2. Generally, they would like to know whether you are ready to relocate. Compay prefers persons who are easy to relocate and travel. So be open-minded and accept the challenge.
  • Q3. They would like to know if you are adjustable in another state too.
  • Q4. They would like to know the salary expectation.

Interview Preparation Tips

Interview preparation tips for other job seekers - My advice to a new aspiring professional is to be open-minded and accept the challenge offered to you. Based on your performance the company will surely look after your choices and preference. you have to bid your salary a little high if they are likely to post you to some outstation.
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Line balancing & cycle time study
  • Q2. Manpower handling
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Nov 2022. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Specified to the functional area by section head
Round 3 - Technical 

(1 Question)

  • Q1. Core QA questions by department head
Round 4 - Technical 

(1 Question)

  • Q1. Core QA questions by Plant Manager
Round 5 - HR 

(1 Question)

  • Q1. Some character analysis questions by HR head
Round 6 - Case Study 

Introduction and few case study intraction with MD sir

Rane NSK Steering Systems Interview FAQs

How many rounds are there in Rane NSK Steering Systems Diploma Mechanical Engineer interview?
Rane NSK Steering Systems interview process usually has 2 rounds. The most common rounds in the Rane NSK Steering Systems interview process are Resume Shortlist and Technical.
What are the top questions asked in Rane NSK Steering Systems Diploma Mechanical Engineer interview?

Some of the top questions asked at the Rane NSK Steering Systems Diploma Mechanical Engineer interview -

  1. What are you vernier caliper least ca...read more
  2. What are you maicrometer least ca...read more

Tell us how to improve this page.

Rane NSK Steering Systems Diploma Mechanical Engineer Interview Process

based on 3 interviews

Interview experience

5
  
Excellent
View more
Rane NSK Steering Systems Diploma Mechanical Engineer Salary
based on 16 salaries
₹1.5 L/yr - ₹3 L/yr
14% less than the average Diploma Mechanical Engineer Salary in India
View more details

Rane NSK Steering Systems Diploma Mechanical Engineer Reviews and Ratings

based on 6 reviews

4.7/5

Rating in categories

4.5

Skill development

4.4

Work-life balance

4.5

Salary

4.3

Job security

4.5

Company culture

4.5

Promotions

4.5

Work satisfaction

Explore 6 Reviews and Ratings
Diploma Trainee Engineer
150 salaries
unlock blur

₹1.3 L/yr - ₹3 L/yr

Junior Engineer
95 salaries
unlock blur

₹1.8 L/yr - ₹3.6 L/yr

Assistant Manager
82 salaries
unlock blur

₹5 L/yr - ₹11 L/yr

Line Leader
70 salaries
unlock blur

₹1.5 L/yr - ₹2.8 L/yr

Senior Executive
59 salaries
unlock blur

₹4 L/yr - ₹7.8 L/yr

Explore more salaries
Compare Rane NSK Steering Systems with

JBM Group

4.0
Compare

Subros

3.8
Compare

Varroc Group

3.6
Compare

Endurance Technologies

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview