Upload Button Icon Add office photos

QIMA

Compare button icon Compare button icon Compare

Filter interviews by

QIMA Quality Inspector Interview Questions and Answers

Updated 19 Jan 2023

QIMA Quality Inspector Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before Jan 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Personal question, professional experience, knowledge about softlines, fabric, garment, hardline and any other, question about Integrity
Round 3 - One-on-one 

(1 Question)

  • Q1. Interview with Team Leader regarding questions about inspection, AQL, Fabric and Garment testing, Travelling and Planning
Round 4 - Technical 

(1 Question)

  • Q1. Technical interview regarding Inspection with a Senior Inspector

Interview Preparation Tips

Interview preparation tips for other job seekers - Applicant should be ready to travel everyday. Should have understanding about how to check quality of fabric, garments, home textile and other categories.
Should be aware about AQL standard and quality parameters of different buyers

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. They asked about various software that you worked like Autocad,catia ,MIS etc
  • Q2. How to draw a joint diagram?
  • Ans. 

    A joint diagram shows how two or more parts fit together.

    • Identify the parts to be joined

    • Determine the type of joint required

    • Sketch the parts and the joint

    • Label the parts and the joint

    • Include dimensions and tolerances

    • Use standard symbols and conventions

    • Review and revise as necessary

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. When can you join,salary expectations,your daily routine
  • Ans. 

    I can join immediately. My salary expectations are competitive. My daily routine includes inspecting products for quality.

    • I can join immediately

    • My salary expectations are competitive

    • My daily routine includes inspecting products for quality

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Grow through your practical knowledge in previous company or in College.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Related drawing question
  • Q2. Related drawing questions
  • Q3. How to grow production
  • Ans. 

    To grow production, focus on optimizing processes, increasing efficiency, and investing in technology.

    • Analyze current production processes and identify areas for improvement

    • Implement lean manufacturing principles to eliminate waste and increase efficiency

    • Invest in new technology and equipment to improve production speed and quality

    • Train and develop employees to improve skills and knowledge

    • Collaborate with suppliers and...

  • Answered by AI
  • Q4. How to control quantity in production
  • Ans. 

    Quantity control in production can be achieved through various methods.

    • Setting production targets and monitoring progress regularly

    • Implementing quality control measures to avoid defects and rework

    • Using statistical process control techniques to identify and correct variations

    • Regularly auditing the production process to ensure compliance with standards

    • Training and empowering employees to identify and report quality issue...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please ask me drawing or technical questions look like dimension looking view
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2024. There were 2 interview rounds.

Round 1 - Technical 

(5 Questions)

  • Q1. What is the process for installing solar panels, and what are the methods to test their functionality?
  • Ans. 

    The process for installing solar panels involves site assessment, mounting the panels, connecting to the electrical system, and testing functionality.

    • Site assessment to determine optimal location for maximum sunlight exposure

    • Mounting the panels securely on the roof or ground

    • Connecting the panels to the electrical system using inverters and wiring

    • Testing functionality through performance monitoring and inspection

  • Answered by AI
  • Q2. How much type quality test in solar system
  • Ans. 

    Various types of quality tests are conducted in solar systems to ensure efficiency and reliability.

    • Quality tests for solar panels include performance testing, durability testing, and efficiency testing.

    • Other quality tests may involve checking for defects in materials, connections, and overall construction.

    • Regular maintenance and monitoring are also important quality control measures in solar systems.

  • Answered by AI
  • Q3. Installation teat
  • Q4. Trench dept test
  • Q5. Sand bedding test
Round 2 - Case Study 

Diploma in electrical engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - Ensure work quality according to the specifications in the drawing while maintaining effective cost control.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Site related activity regarding Quality standards
  • Q2. Present project job working details.
  • Q3. PQR, WPS related questions
  • Q4. Hydrotest regarding
  • Q5. Ndt method, types which you follow
  • Ans. 

    I follow various NDT methods such as visual inspection, liquid penetrant testing, magnetic particle testing, ultrasonic testing, and radiographic testing.

    • Visual inspection involves examining the surface of a component for any visible defects.

    • Liquid penetrant testing uses a liquid dye to detect surface-breaking defects.

    • Magnetic particle testing uses magnetic fields to identify surface and near-surface defects.

    • Ultrasonic...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I have given interview fully confidence and share my knowledge to interviewer. So be carefully give answer which asking.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What is Least count of lathe machine?
  • Ans. 

    The least count of a lathe machine is the smallest measurement that can be read or measured by the machine.

    • The least count of a lathe machine is typically determined by the number of divisions on the main scale and the number of divisions on the Vernier scale.

    • For example, if the main scale has 1 mm divisions and the Vernier scale has 10 divisions that cover 9 mm, the least count would be 0.1 mm.

    • The least count is impor...

  • Answered by AI
  • Q2. Which tool was used to boring machine?
  • Ans. 

    The tool used for boring machine is called a boring bar.

    • Boring bar is a cutting tool used in machining to create holes with precise dimensions and smooth finishes.

    • It is commonly used in metalworking and woodworking industries.

    • Examples of boring bars include solid carbide bars, indexable insert bars, and adjustable bars.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Small or big don't give up job for any situations
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is the role of a Quality Inspector?
  • Ans. 

    Quality Inspectors are responsible for ensuring products meet quality standards by inspecting, testing, and reporting on the quality of products.

    • Inspect products to ensure they meet quality standards

    • Conduct tests to identify defects or issues

    • Report on the quality of products and recommend improvements

    • Collaborate with production teams to address quality concerns

    • Maintain documentation of inspection results

  • Answered by AI
  • Q2. What are the differences between Quality Assurance (QA) and Quality Control (QC)?
  • Ans. 

    QA focuses on preventing defects in the production process, while QC focuses on identifying defects in the final product.

    • QA is process oriented, focusing on improving and monitoring the processes used to create the product.

    • QC is product oriented, focusing on identifying defects in the final product through inspections and testing.

    • QA is proactive, aiming to prevent defects before they occur.

    • QC is reactive, identifying d...

  • Answered by AI

I applied via Walk-in and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Current Technologies

Round 3 - Aptitude Test 

Duration 1 hr, Coding,GK and English

Interview Preparation Tips

Interview preparation tips for other job seekers - Have a good knowledge in ths subject which you are applying for th post

Manager Interview Questions & Answers

Wipro user image Anonymous

posted on 24 Oct 2021

I applied via Indeed and was interviewed before Oct 2020. There were 8 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Why should we select u.
  • Ans. Possitive attitude,great leader who like to work as team and hunger to learn new.
  • Answered Anonymously
  • Q2. What u can do for company if u get selected
  • Ans. I believe in that if company grows then definatly i will also grow.if you work as employee then u r thought and aproach will be very narrow and if you work like its ur own company then sky is ur limit.you passion n approach towards work gets changes.
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Always believes that u r the best in the room.u r the most handsome or beautiful in the room. Have a great communications by dat u can win half the battle.Have eye to eye contact.give every questions answer irrespective of wrong or write but try to answer.dont keep quite.keeps on talking.

Interview Questionnaire 

1 Question

  • Q1. Tell me about particular accounting treatment under IFRS
  • Ans. 

    IFRS has various accounting treatments, such as fair value accounting, impairment accounting, and lease accounting.

    • Fair value accounting involves measuring and reporting assets and liabilities at their current market value.

    • Impairment accounting involves recognizing a loss in the value of an asset that has decreased in value.

    • Lease accounting involves recognizing lease payments as either operating or finance leases.

    • IFRS ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Read IFRS in comprehensive manner

QIMA Interview FAQs

How many rounds are there in QIMA Quality Inspector interview?
QIMA interview process usually has 4 rounds. The most common rounds in the QIMA interview process are Resume Shortlist, HR and One-on-one Round.
How to prepare for QIMA Quality Inspector interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at QIMA. The most common topics and skills that interviewers at QIMA expect are Home Appliances, Inspection, Lab Testing, Quality Inspection and Supplier Audit.
What are the top questions asked in QIMA Quality Inspector interview?

Some of the top questions asked at the QIMA Quality Inspector interview -

  1. Interview with Team Leader regarding questions about inspection, AQL, Fabric an...read more
  2. Technical interview regarding Inspection with a Senior Inspec...read more

Tell us how to improve this page.

QIMA Quality Inspector Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
QIMA Quality Inspector Salary
based on 18 salaries
₹4.5 L/yr - ₹10 L/yr
193% more than the average Quality Inspector Salary in India
View more details

QIMA Quality Inspector Reviews and Ratings

based on 8 reviews

3.7/5

Rating in categories

4.2

Skill development

2.8

Work-life balance

4.1

Salary

2.4

Job security

3.4

Company culture

2.6

Promotions

4.0

Work satisfaction

Explore 8 Reviews and Ratings
Quality Inspector
18 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Compliance Engineer
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Compliance Associate
13 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Compliance Engineer
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

HR Specialist
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare QIMA with

Bureau Veritas

3.9
Compare

SGS

3.9
Compare

TÜV SÜD

3.9
Compare

DNV GL

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview