Upload Button Icon Add office photos

Filter interviews by

Qdc Consulting Structural Engineer Trainee Interview Questions and Answers

Updated 7 Mar 2022

Qdc Consulting Structural Engineer Trainee Interview Experiences

1 interview found

I applied via Walk-in and was interviewed before Mar 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. BMD AND SFD OF SIMPLE FRAME SUBJECTED TO LATERAL/GRAVITY LOAD
  • Ans. 

    BMD and SFD are diagrams used to analyze the internal forces in a simple frame subjected to lateral/gravity load.

    • BMD (Bending Moment Diagram) shows the variation of bending moment along the length of the beam.

    • SFD (Shear Force Diagram) shows the variation of shear force along the length of the beam.

    • For a simple frame subjected to lateral load, the BMD and SFD will show the maximum bending moment and shear force at the p...

  • Answered by AI
  • Q2. BMD,SFD,DETERMINING REACTIONS OF BEAMS
Round 3 - One-on-one 

(1 Question)

  • Q1. ETABS step by step procedure
  • Ans. 

    ETABS is a software used for structural analysis and design of buildings.

    • Create a new model or import an existing one

    • Define materials and sections

    • Define loads and load combinations

    • Analyze the model

    • Design the members

    • Review the results and make necessary adjustments

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Concentrate on basics like bmd, sfd of beams and frames. Learn etabs well.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Discuss about previous job and salary
Round 2 - Technical 

(1 Question)

  • Q1. Basic construction knowledge
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Aug 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. Silo Jumpform process
  • Q2. Concrete ratio

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience for client job.
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What's your last experience?
  • Q2. Explain Last experience in brief
Round 3 - One-on-one 

(2 Questions)

  • Q1. Explain your problem solving skill?
  • Q2. Give one real past time experience which you have faced on your last job.

I applied via Company Website and was interviewed in Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About what I did so far
  • Q2. Technical details of what I did

Interview Preparation Tips

Interview preparation tips for other job seekers - As per my experience and knowledge whatever I did

I applied via Recruitment Consultant and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. All the things were technical

Interview Preparation Tips

Interview preparation tips for other job seekers - I was able to answer most of question correctly . I tried to answer each question with examples.

Interview Preparation Tips

Round: cgpa shortlisting round
Experience: There was a shortlist based on the CGPA and they took one technical interview

General Tips: Try to answer as much as possible. Don't be over confident. Don’t get too stressed up on placement procedures.Concentrate more on the hardware part and the microprocessors.
It was a bit challenging.
Skill Tips: These subjects should be prepared well-
Database
Operating System
Distributed system
Skills:
College Name: NIT Surathkal

Interview Preparation Tips

Round: Resume Shortlist
Experience: I had a standard resume for this company as per our institute placement cell norms.
They were least interested in my resume. They cared more about your analytical skills rather than on your on campus activities.

Round: Test
Experience: The first round was the written test which had a few questions from data interpretation and some questions that were quite peculiar to the consulting sector as such. Only 24 students got shortlisted for the next round out of close to 350 applicants.
Tips: The cut off for the written test was very high. So ensuring accuracy and attempting all the questions is important.

Round: Case Study Interview
Experience: The next round was the case study round. The case that I was presented with was to calculate the number of hoardings in a metropolitan city with the help of given data. I failed to qualify beyond this round.
Tips: One should prepare for “Guesstimate” type case interviews (where the interviewee is tried to estimate the final answer based on logical deduction and analysis of the given facts) for this company as they give very high emphasis to the performance in the case study interview round.

College Name: IIT ROORKEE
Motivation: Indus Insight is a start-up which uses quantitative analytics to give solution to real life problems encountered in business. The company was founded by an IITB alumnus. It is growing at a fast pace and the best source of information about them was the pre placement talk organised by them.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I had a standard resume for this company as per our institute placement cell norms.
For a consultant profile, they do look for a consistent academic performance, scholarships, Olympiads etc. So I did make sure to include all my academic achievements in my resume.

Round: Test
Experience: This was the first round and was conducted in October itself, well before the final placement process that begins only in December. The test had 20 questions. All the questions described a particular situation and 4 options describing solutions/implications of the situation were provided. The candidate was supposed to choose one of the 4 alternatives, which according to him, was the best possible answer. From what I recall, there wasn’t much calculation involved. Use of calculator was permitted.
Tips: Attempt all the questions. Be accurate.

Round: Guesstimate Interview
Experience: Around 23 students got shortlisted for the next round of selection process which was held in December.
This round was based on “guesstimate” problems. I was asked to calculate the total annual revenue of McDonalds in India. No other data was given. Use of calculator was not permitted. This interview lasted for about 10-15 minutes.
Some other candidate was asked to estimate the length of roads in Delhi. Another one was asked to calculate the number of road side ads/banners in Delhi.
Tips: Prepare for guesstimate problems and qualitative case analysis.

College Name: IIT ROORKEE
Motivation: Indus Insights is a new company. It had a team of only 6 people when it came for recruiting. Not much information was available on the internet. I did attend its pre-placement talk and that acted as the main source of information about the company and the profile offered.

I applied via Campus Placement and was interviewed before Nov 2020. There were 6 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Guesstimate and Logical Reasoning
  • Q2. Guesstimate and Case Study
  • Q3. Company Fit

Interview Preparation Tips

Interview preparation tips for other job seekers - Think Everything (every possible scenario) and be truthful

Qdc Consulting Interview FAQs

How many rounds are there in Qdc Consulting Structural Engineer Trainee interview?
Qdc Consulting interview process usually has 3 rounds. The most common rounds in the Qdc Consulting interview process are Resume Shortlist, Technical and One-on-one Round.
What are the top questions asked in Qdc Consulting Structural Engineer Trainee interview?

Some of the top questions asked at the Qdc Consulting Structural Engineer Trainee interview -

  1. BMD AND SFD OF SIMPLE FRAME SUBJECTED TO LATERAL/GRAVITY L...read more
  2. ETABS step by step proced...read more
  3. BMD,SFD,DETERMINING REACTIONS OF BE...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

C DOT Interview Questions
3.8
 • 27 Interviews
Indus Insights Interview Questions
2.4
 • 25 Interviews
Milliman Interview Questions
3.8
 • 20 Interviews
Ven Consulting Interview Questions
3.4
 • 19 Interviews
Diverse Lynx Interview Questions
3.7
 • 19 Interviews
Gi Group Interview Questions
3.8
 • 15 Interviews
Selectsys Interview Questions
3.6
 • 15 Interviews
VHS Consulting Interview Questions
3.7
 • 14 Interviews
View all

Qdc Consulting Structural Engineer Trainee Reviews and Ratings

based on 1 review

2.0/5

Rating in categories

3.0

Skill development

1.0

Work-life balance

1.0

Salary

3.0

Job security

1.0

Company culture

1.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Electrical Design Engineer
13 salaries
unlock blur

₹1.8 L/yr - ₹6.2 L/yr

Hvac Design Engineer
11 salaries
unlock blur

₹3.5 L/yr - ₹6.5 L/yr

Design Engineer
10 salaries
unlock blur

₹3 L/yr - ₹7.3 L/yr

Structural Design Engineer
5 salaries
unlock blur

₹2.2 L/yr - ₹3 L/yr

BIM Engineer
5 salaries
unlock blur

₹4.1 L/yr - ₹5.5 L/yr

Explore more salaries
Compare Qdc Consulting with

Diverse Lynx

3.7
Compare

Shah Technical Consultants

3.5
Compare

Gi Group

3.8
Compare

Ven Consulting

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview