Upload Button Icon Add office photos

Filter interviews by

Qatar Shell GTL Mechanical Foreman Interview Questions and Answers

Updated 26 Mar 2022

Qatar Shell GTL Mechanical Foreman Interview Experiences

1 interview found

I applied via Newspaper Ad and was interviewed in Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Explain the procedure of dismantling a control valve which is at a height of 20mts?
  • Ans. 

    Dismantling a control valve at a height of 20mts requires proper planning and safety measures.

    • Ensure proper scaffolding is in place

    • Use a hoist or crane to lower the valve to the ground

    • Disconnect all electrical and mechanical connections

    • Remove bolts and nuts securing the valve

    • Inspect valve components for damage or wear

    • Clean and lubricate valve components before reassembly

  • Answered by AI
  • Q2. Will you be able to manage confined space activities?? What are the hazards and how will you mitigate them?
  • Ans. 

    Yes, I am able to manage confined space activities.

    • Identify and assess potential hazards in the confined space

    • Implement proper ventilation to control air quality

    • Ensure proper lighting and communication equipment

    • Establish and enforce strict entry and exit procedures

    • Provide appropriate personal protective equipment (PPE)

    • Train and educate workers on confined space safety

    • Regularly monitor and test the atmosphere inside the...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. What are your salary expectations?
  • Q2. Share details of your previous job.

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidence and strong communication skill is the key to crack any interview.

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Process related

Interview Preparation Tips

Interview preparation tips for other job seekers - It doesn't matter if you are not subject matter expert... Your behavior matters more than functional.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. What is poroosity
  • Ans. 

    Porosity is the measure of empty spaces in a material, often used in geology and engineering.

    • Porosity is the ratio of void spaces to total volume in a material.

    • It is expressed as a percentage.

    • Porosity is important in fields like geology for assessing rock formations and in engineering for determining the strength of materials.

    • Examples of porous materials include sponges, pumice stones, and aerogels.

  • Answered by AI
  • Q2. What is permeability
  • Ans. 

    Permeability is the property of a material that allows fluids or gases to pass through it.

    • Permeability is a measure of how easily a substance can pass through a material.

    • It is often used in geology to describe how easily fluids can flow through rocks or soil.

    • Permeability can be affected by factors such as pore size, connectivity, and fluid viscosity.

    • Materials like sandstone have high permeability, while materials like

  • Answered by AI
  • Q3. Why you want this job
  • Ans. 

    I am passionate about helping others and believe this job will allow me to make a positive impact in the community.

    • I have a strong desire to contribute to the well-being of others

    • I am excited about the opportunity to work in a team-oriented environment

    • I am eager to learn and grow in my career

  • Answered by AI
  • Q4. Oil shale vs shale oil differnece
  • Ans. 

    Oil shale is a rock containing kerogen that can be converted into shale oil through a process called retorting.

    • Oil shale is a sedimentary rock containing kerogen, a precursor to oil.

    • Shale oil is the liquid hydrocarbons extracted from oil shale through a process called retorting.

    • Oil shale deposits are found in various countries like the United States, Estonia, and China.

    • Shale oil production has increased in recent years

  • Answered by AI
  • Q5. Unconventional reservoir

Interview Preparation Tips

Round: Technical Interview
Experience: "tell me about yourself..i gave him info on me my family n in my hobbies i mentioned 'sports for fun' n he caught me der..
what would u play in commonwealth games?
who won max no of gold medals in the recent olympics..
(my answer was a simple ""no idea!!!""
tell me about ur industrial visits..which 1 did u like betr n give me some information on the part u liked the most..(then some details on motors etc)
what is a bearing?where do u see a bearing bein used in this room?? (fan)
why reliance?? why not siemens or abb??"

Skill Tips: "Just be confident even if u r unable to answer a few questions..they dont expect u to be perfect..they just want to see how much u kno n how much u can learn..n almost every company asks if u r comfortable to be placed anywhere in india..just say yes..they do that to test ur flexibility..n if u r really in need of a job, be prepared to go to any place..
If u r the first to be interviewed, u have higher chances of getting selected..an empirical observation.."
College Name: Veermata Jijabai Technological Institute, Mumbai [ VJTI ]

I applied via Approached by Company and was interviewed in Oct 2018. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Technical questions like transformer & transmission and distribution system
  • Q2. Salary discussion.

Interview Preparation Tips

Round: Test
Experience: Aptitude, 60 questions 60 minutes

General Tips: Nice interview
This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills.
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: 1-4 weeks

Interview Preparation Tips

Round: Test
Experience: aptitude reasoning and base techanical.

Round: Group Discussion
Experience: techanical core branch.

I applied via Company Website and was interviewed before Nov 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. What is safety define deeply
  • Ans. 

    Safety is the state of being free from harm or danger.

    • Safety involves identifying and assessing potential hazards

    • It requires taking measures to prevent accidents and injuries

    • It involves following established safety protocols and procedures

    • Safety also includes being prepared for emergencies and knowing how to respond

    • Regular training and education on safety practices is crucial

  • Answered by AI
  • Q2. Safety is major parts of a industries because lack of proper safety mangement industries can't be run longer time. in chemicals industries most of safety required for no Accident of fire

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic Electrical questions but deeply asked by interviewers

I applied via Recruitment Consulltant and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Practical interview 

(2 Questions)

  • Q1. 3phase Moter Star+Delta stater how work
  • Ans. 

    Star-Delta starter is used to start 3-phase motors. It reduces the starting current and torque.

    • Star-Delta starter connects the motor in star configuration during starting to reduce the starting current and torque.

    • After a few seconds, the starter switches the motor to delta configuration for normal operation.

    • This method is used for motors with high starting current and torque requirements.

    • It is commonly used in industri...

  • Answered by AI
  • Q2. DOL stater how work 3phase moter
  • Ans. 

    DOL starter is a direct-on-line starter used to start 3-phase motors by connecting them directly to the power supply.

    • DOL starter provides full voltage to the motor at the start

    • It consists of a contactor, overload relay, and start/stop push buttons

    • The contactor connects the motor to the power supply

    • The overload relay protects the motor from overloading

    • The start/stop push buttons control the on/off function of the motor

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Indian Oil Corporation Electrical Supervisor interview:
  • As your interested job line
Interview preparation tips for other job seekers - Self confidence with your perfect experience work in your

I applied via Naukri.com and was interviewed in Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Tell me about your previous job ?
  • Q2. What is deference between RS 485 and RS 232
  • Ans. 

    RS 485 is a multi-point communication standard while RS 232 is a point-to-point communication standard.

    • RS 485 supports up to 32 devices on a single bus while RS 232 only supports two devices.

    • RS 485 uses differential signaling for noise immunity while RS 232 uses single-ended signaling.

    • RS 485 can transmit data over longer distances than RS 232.

    • RS 485 is commonly used in industrial automation and control systems while RS

  • Answered by AI
  • Q3. What is protocol?
  • Ans. 

    Protocol is a set of rules and guidelines that govern the communication between devices or systems.

    • Protocols ensure that devices or systems can communicate with each other effectively and efficiently.

    • They define the format, timing, sequencing, and error checking of messages exchanged between devices or systems.

    • Examples of protocols include TCP/IP, HTTP, FTP, and SMTP.

    • Protocols can be implemented in hardware, software, ...

  • Answered by AI
  • Q4. What is PLC?
  • Ans. 

    PLC stands for Programmable Logic Controller. It is a digital computer used for automation of electromechanical processes.

    • PLC is used in industrial automation to control machinery and processes.

    • It is programmed using ladder logic or other programming languages.

    • PLC can be used in various applications such as manufacturing, transportation, and energy.

    • Examples of PLC brands include Siemens, Allen-Bradley, and Mitsubishi.

    • P...

  • Answered by AI
  • Q5. How many types of PLC?
  • Ans. 

    There are several types of PLCs, including modular, compact, rack-mounted, and software-based PLCs.

    • Modular PLCs are designed to be expandable and customizable.

    • Compact PLCs are smaller and more cost-effective than modular PLCs.

    • Rack-mounted PLCs are designed to be mounted in a standard equipment rack.

    • Software-based PLCs run on a computer and use specialized software to emulate a physical PLC.

    • Other types of PLCs include s...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - First of all preparation on previous job , what is your role and what to do , how to do ,
* Should be 2 year experience in electronics and automation related., Communication, PLC etc.

Skills evaluated in this interview

I applied via Campus Placement and was interviewed before Nov 2018. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. Motor maintenance battery bank Breaker maintenance Earthpit
  • Q2. Which type of maintenance of induction motor
  • Ans. 

    There are two types of maintenance for induction motors: preventive and corrective.

    • Preventive maintenance involves regular inspections, cleaning, lubrication, and replacement of worn parts to prevent breakdowns.

    • Corrective maintenance involves repairing or replacing parts after a breakdown has occurred.

    • Preventive maintenance is more cost-effective in the long run and helps to extend the life of the motor.

    • Examples of pre...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - How many maintenance of squirrel cage induction motor

Qatar Shell GTL Interview FAQs

How many rounds are there in Qatar Shell GTL Mechanical Foreman interview?
Qatar Shell GTL interview process usually has 3 rounds. The most common rounds in the Qatar Shell GTL interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in Qatar Shell GTL Mechanical Foreman interview?

Some of the top questions asked at the Qatar Shell GTL Mechanical Foreman interview -

  1. Will you be able to manage confined space activities?? What are the hazards and...read more
  2. Explain the procedure of dismantling a control valve which is at a height of 20...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Shell Interview Questions
4.0
 • 195 Interviews
Bharat Petroleum Interview Questions
4.1
 • 149 Interviews
Schlumberger Interview Questions
3.9
 • 140 Interviews
GAIL Interview Questions
4.4
 • 66 Interviews
ExxonMobil Interview Questions
3.8
 • 65 Interviews
bp Interview Questions
3.8
 • 61 Interviews
View all
Qatar Shell GTL Mechanical Foreman Salary
based on 4 salaries
₹1 L/yr - ₹10.5 L/yr
29% less than the average Mechanical Foreman Salary in India
View more details

Qatar Shell GTL Mechanical Foreman Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

-

Skill development

-

Work-life balance

-

Salary

-

Job security

-

Company culture

-

Promotions

-

Work satisfaction

Explore 1 Review and Rating
Senior Electrical Technician
5 salaries
unlock blur

₹6 L/yr - ₹12 L/yr

Instrumentation Technician
5 salaries
unlock blur

₹2.7 L/yr - ₹10.2 L/yr

Senior Instrumentation Technician
5 salaries
unlock blur

₹2.9 L/yr - ₹9.4 L/yr

Electrical Supervisor
4 salaries
unlock blur

₹5.4 L/yr - ₹18 L/yr

Safety Officer
4 salaries
unlock blur

₹3 L/yr - ₹13.8 L/yr

Explore more salaries
Compare Qatar Shell GTL with

Reliance Industries

4.0
Compare

Indian Oil Corporation

4.4
Compare

Shell

4.0
Compare

Bharat Petroleum

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview