Pride Group QS Engineer Interview Questions and Answers

Written paper as per site and codes

It’s about Quality and execution with VP and audit team

Q1. Salary discussion
Add your answer
Q2. Joining procedures and company policy
Add your answer

Q1. Technical questions
Add your answer

Q1. Technical questions
Add your answer

Q1. Salary discussion
Add your answer

Q1. How is stone/Tile flooring /Cladding is measured
Ans. 
Stone/Tile flooring/Cladding is measured in square meters or square feet depending on the unit of measurement used.
• Measure the length and width of the area to be covered with stone/tile flooring/cladding

• Multiply the length by the width to get the total square meters or square feet

• Account for any cuts or wastage in the calculation

• Consider the pattern or design of the flooring/cladding when measuring
Answered by AI
Add your answer

Q1. Concrete pouring method
Ans. 
Concrete pouring method involves the process of placing and compacting concrete into a formwork to create a solid structure.
• Ensure formwork is properly prepared and secured before pouring concrete

• Use appropriate equipment such as concrete pumps or buckets for pouring

• Monitor concrete flow and consistency to avoid segregation or honeycombing

• Properly compact the concrete to remove air voids and ensure strength

• Allow suffic...read more
Answered by AI
Add your answer
Q2. Shuttering of columns
Ans. 
Shuttering of columns is the process of creating temporary formwork to support concrete until it sets.
• Shuttering is usually made of plywood, timber, or steel.

• It is important to ensure the shuttering is properly supported and aligned before pouring concrete.

• The shuttering should be removed after the concrete has set to the required strength.

• Properly designed and constructed shuttering helps in achieving a smooth and uni
Answered by AI
Add your answer
Q3. Reinforcement checking checklist points
Add your answer
Q4. Tiles placing method
Ans. 
Tiles can be placed using various methods such as grid layout, random pattern, or specific design layout.
• Tiles can be placed in a grid layout for a uniform and organized look.

• Random pattern placement can create a more eclectic and unique design.

• Specific design layout involves placing tiles according to a pre-determined pattern or design.

• Consider factors like tile size, shape, color, and grout spacing when deciding on t
Answered by AI
Add your answer
Q5. Flooring method for stone work
Ans. 
The flooring method for stone work typically involves using mortar or adhesive to secure the stones in place.
• Prepare the subfloor by ensuring it is clean, level, and dry

• Apply mortar or adhesive to the back of each stone before placing it on the subfloor

• Use spacers to maintain consistent spacing between stones

• Allow the mortar or adhesive to dry completely before grouting the joints

• Seal the finished stone floor to protec
Answered by AI
Add your answer

Q1. Formula for Unit weight of steel rebar
Ans. 
Unit weight of steel rebar is calculated using a specific formula based on the dimensions of the rebar.
• Unit weight of steel rebar = (D^2/162.2) * L, where D is the diameter of the rebar in inches and L is the length of the rebar in feet.

• The formula is derived from the weight of a steel bar per foot, which is 3.4 pounds for a rebar with a diameter of one inch.

• For example, a steel rebar with a diameter of 0.5 inches and ...read more
Answered by AI
View 1 more answer