Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Parason Machinery Team. If you also belong to the team, you can get access from here

Parason Machinery Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Parason Machinery Maintenance Engineer Interview Questions and Answers

Updated 10 Jan 2022

Parason Machinery Maintenance Engineer Interview Experiences

2 interviews found

I applied via Naukri.com and was interviewed in Jul 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Maintenance related problems and solutions

Interview Preparation Tips

Interview preparation tips for other job seekers - Go with confidence ...
Share your past experience ..

I applied via Naukri.com and was interviewed in Jan 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. General maintenance questions and mttr mtbf documentation.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for Technical questions

Maintenance Engineer Interview Questions Asked at Other Companies

Q1. 1)which refrigeration cycle used in chilling plant?
asked in MRF Tyres
Q2. How much bar using in hydraulic, and what is meaning of NAC.
Q3. What are the processes involved in Heat Treatment of metals and w ... read more
asked in Ceat Tyres
Q4. How many types of Valve in Instrumentation..?
Q5. What was the most difficult electrical installation or repair you ... read more

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Technical interview with panel
  • Q2. About industrial communication
  • Q3. Protection of transformer
  • Ans. 

    Protection of transformer involves measures to prevent damage from overloads, short circuits, and other electrical faults.

    • Use of protective relays to detect abnormal conditions and isolate the transformer

    • Installation of fuses and circuit breakers to interrupt excessive currents

    • Regular maintenance and testing to ensure proper functioning of protective devices

    • Implementation of temperature monitoring and cooling systems t...

  • Answered by AI
  • Q4. Industrial communication,

I applied via Approached by Company and was interviewed before May 2021. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. As a fresher most of all interview questions were about unit conversion and basic elements of mechanical engineering.

Interview Preparation Tips

Topics to prepare for Line O Matic Graphic Industries Service Engineer interview:
  • Mechanical Engineering
Interview preparation tips for other job seekers - There is no growth or learning in most of all job profile as it's monotonous job and there is no further usage of such experience.
People at LOM are stuck for years due to lack of knowledge growth.
HR persons are very unprofessional so ask them to mail you about all agreements.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Mar 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

In campus placement, aptitude with technical questions exam conducted by JK PAPER.

Round 2 - One-on-one 

(2 Questions)

  • Q1. Some basic engineering questions
  • Ans. Basically some basics from your domain,then your internships related questions
  • Answered by JAMIL HOSEN KHAN
  • Q2. Why do u want to join this organisation.
  • Ans. I want to work as mechanical engineer as I have great interest in it
  • Answered by JAMIL HOSEN KHAN

Interview Preparation Tips

Interview preparation tips for other job seekers - This company only hire through college campus placement but if u have chemical industry experience the only their any chance.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Basic details and previous experience
  • Q2. Details about previous company
Round 3 - Technical 

(2 Questions)

  • Q1. Star delta starter and DOL
  • Q2. Question on Transformer...

I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Mechanical related questions
  • Q2. What is the function of bearing and types explain in detail?
  • Ans. 

    Bearings are mechanical components that reduce friction between moving parts.

    • Bearings support the load and allow for smooth rotation or linear movement.

    • They reduce friction and wear between moving parts.

    • Bearings come in various types such as ball bearings, roller bearings, and plain bearings.

    • Ball bearings use balls to separate the moving parts and are commonly used in applications like motors and wheels.

    • Roller bearings...

  • Answered by AI
  • Q3. How to identify problem in bearing while running machine?
  • Ans. 

    To identify a problem in a running machine bearing, one can listen for abnormal noises, check for excessive vibration, monitor temperature, and inspect for wear or damage.

    • Listen for abnormal noises such as grinding, squeaking, or knocking sounds.

    • Check for excessive vibration in the machine or bearing housing.

    • Monitor the temperature of the bearing using an infrared thermometer or thermal imaging camera.

    • Inspect the beari...

  • Answered by AI
  • Q4. How to identify problems in gearbox, fans and blowers?
  • Ans. 

    To identify problems in gearbox, fans, and blowers, one can perform visual inspections, listen for abnormal noises, check for vibrations, monitor temperature, and conduct performance tests.

    • Perform visual inspections to check for any signs of wear, damage, or leaks.

    • Listen for abnormal noises such as grinding, rattling, or whining sounds.

    • Check for vibrations in the gearbox, fans, or blowers, which may indicate misalignme...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Mechanical related questions
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. How to measure in technical issue
  • Ans. 

    Technical issues can be measured through various methods such as data analysis, testing, monitoring, and feedback collection.

    • Use data analysis to identify patterns and trends in technical issues.

    • Conduct testing to determine the root cause of the problem and measure its impact.

    • Implement monitoring systems to track the performance and behavior of the technical issue over time.

    • Collect feedback from users or stakeholders t...

  • Answered by AI
  • Q2. Y should we measure in mm
  • Ans. 

    Measuring in mm provides a more precise and accurate measurement compared to other units.

    • Millimeters are a smaller unit of measurement, allowing for more precise measurements.

    • Using mm can help avoid rounding errors that may occur with larger units like centimeters or meters.

    • Many mechanical components are designed and manufactured with measurements in mm for accuracy.

    • International standards often use mm as the preferred...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - How to do
When to do
Where to do
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Dec 2024. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. What is power operation and maintenance
  • Ans. 

    Power operation and maintenance involves ensuring the efficient and safe functioning of power generation equipment.

    • Regular inspection and testing of power generation equipment

    • Performing preventive maintenance to avoid breakdowns

    • Troubleshooting and repairing any issues that arise

    • Ensuring compliance with safety regulations and standards

    • Monitoring energy consumption and optimizing efficiency

    • Training staff on proper operat

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. What is Power plant operation and maintenance.
  • Ans. 

    Power plant operation and maintenance involves the continuous monitoring, inspection, and repair of equipment to ensure efficient and safe functioning.

    • Regular monitoring of equipment performance

    • Scheduled inspections and maintenance activities

    • Prompt repairs of any faults or failures

    • Ensuring compliance with safety regulations

    • Optimizing plant efficiency through proper maintenance practices

  • Answered by AI
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
No response
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Tell me about your self,
Round 3 - Behavioral 

(1 Question)

  • Q1. Yet to attend the interview, Personal details Tell me about your self
Round 4 - HR 

(1 Question)

  • Q1. Yet to attend ,

Interview Preparation Tips

Interview preparation tips for other job seekers - Later update

Parason Machinery Interview FAQs

How to prepare for Parason Machinery Maintenance Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Parason Machinery. The most common topics and skills that interviewers at Parason Machinery expect are Machine Shop, CNC Maintenance, Electrical Maintenance, Machine Maintenance and Preventive Maintenance.
What are the top questions asked in Parason Machinery Maintenance Engineer interview?

Some of the top questions asked at the Parason Machinery Maintenance Engineer interview -

  1. General maintenance questions and mttr mtbf documentati...read more
  2. Maintenance related problems and soluti...read more

Tell us how to improve this page.

Parason Machinery Maintenance Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

JK Paper Interview Questions
4.0
 • 50 Interviews
Andhra Paper Interview Questions
3.8
 • 17 Interviews
Birla Cellulose Interview Questions
3.6
 • 11 Interviews
WestRock Interview Questions
3.4
 • 7 Interviews
Bilt Interview Questions
4.4
 • 7 Interviews
Kuantum Papers Interview Questions
4.0
 • 7 Interviews
View all
Parason Machinery Maintenance Engineer Salary
based on 25 salaries
₹2.5 L/yr - ₹4.5 L/yr
At par with the average Maintenance Engineer Salary in India
View more details

Parason Machinery Maintenance Engineer Reviews and Ratings

based on 5 reviews

3.3/5

Rating in categories

4.0

Skill development

3.3

Work-life balance

3.2

Salary

1.7

Job security

2.5

Company culture

2.5

Promotions

3.9

Work satisfaction

Explore 5 Reviews and Ratings
Design Engineer
52 salaries
unlock blur

₹2 L/yr - ₹4.5 L/yr

Maintenance Engineer
25 salaries
unlock blur

₹2.5 L/yr - ₹4.5 L/yr

Production Supervisor
25 salaries
unlock blur

₹1.6 L/yr - ₹4.5 L/yr

Production Engineer
24 salaries
unlock blur

₹2.5 L/yr - ₹4.2 L/yr

Junior Engineer
23 salaries
unlock blur

₹1.8 L/yr - ₹3.5 L/yr

Explore more salaries
Compare Parason Machinery with

JK Paper

4.0
Compare

Emami Paper Mills

4.2
Compare

Century Pulp & Paper

3.9
Compare

Andhra Paper

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview