Filter interviews by
A solar system is a collection of planets, moons, asteroids, comets, and other celestial bodies that orbit around a star.
The solar system consists of eight planets, including Earth, and their moons.
The sun is at the center of the solar system and provides light and heat to the planets.
The solar system also contains dwarf planets, such as Pluto, and various other objects like asteroids and comets.
The study of the solar ...
There are three types of solar panels: monocrystalline, polycrystalline, and thin-film.
Monocrystalline panels are made from a single silicon crystal and are the most efficient.
Polycrystalline panels are made from multiple silicon crystals and are less expensive than monocrystalline panels.
Thin-film panels are made from a thin layer of photovoltaic material and are the least efficient but also the least expensive.
Other ...
A multimeter is an electronic device used to measure voltage, current, and resistance.
Multimeter is a combination of ammeter, voltmeter, and ohmmeter.
It can measure AC/DC voltage, current, resistance, capacitance, frequency, and temperature.
It has two probes, red for positive and black for negative, to connect to the circuit.
It has a display screen to show the measured values.
It is an essential tool for electrical and ...
posted on 13 Mar 2023
I applied via Naukri.com and was interviewed in Feb 2023. There were 2 interview rounds.
Coding and decoding
Direction test
I study electrical engineering because of my passion for understanding and working with electrical systems.
Passion for understanding and working with electrical systems
Interest in designing and developing electrical devices
Fascination with the principles of electricity and magnetism
Desire to contribute to advancements in renewable energy
Opportunity to solve complex technical challenges
Potential for career growth and jo...
I have experience in building power transmission systems.
I have built power transmission systems in my previous job.
I have worked on projects involving power transmission systems.
I am familiar with the process of building power transmission systems.
I have knowledge of the equipment and materials required for power transmission systems.
I have experience in designing power transmission systems for different environments.
Electricity is the flow of electrons through a conductor.
Electricity is a form of energy that powers most of our modern devices.
It is generated by various sources such as coal, wind, solar, and hydro power.
Electricity can be stored in batteries and used later.
It can be dangerous if not handled properly and can cause electric shocks or fires.
Electricity is measured in units of volts, amps, and watts.
posted on 27 Nov 2022
I applied via Campus Placement
Company profile about
Company profile realted
Test.english questions.technical
posted on 13 Feb 2024
I applied via Walk-in and was interviewed before Feb 2023. There were 2 interview rounds.
Cables are used to transmit electrical signals or power between devices.
Cables are made up of conductive materials, such as copper or aluminum.
They come in various types, including coaxial, twisted pair, and fiber optic cables.
Cables are used in a wide range of applications, such as telecommunications, computer networking, and power distribution.
They can be categorized based on their voltage rating, insulation material...
The Betz limit is the maximum amount of energy that can be extracted from a wind turbine, which is 59.3% of the total kinetic energy of the wind.
The Betz limit was derived by German physicist Albert Betz in 1919.
It states that no wind turbine can capture more than 59.3% of the kinetic energy in the wind.
This limit is based on the conservation of mass and momentum principles.
The Betz limit is important in wind energy en...
Yes, I am familiar with AutoCAD.
I have experience using AutoCAD for electrical design and drafting.
I am proficient in creating and modifying electrical schematics and layouts using AutoCAD.
I have used AutoCAD to generate 2D and 3D models of electrical components and systems.
I am familiar with AutoCAD's tools and commands specific to electrical engineering.
I have successfully completed projects using AutoCAD in my previ
posted on 7 Mar 2025
I was interviewed in Sep 2024.
To check a motor's condition, assess its electrical parameters, mechanical integrity, and operational performance.
Measure voltage and current: Use a multimeter to check if the motor is receiving the correct voltage and current.
Inspect insulation: Perform an insulation resistance test to ensure the windings are not shorted or grounded.
Check for unusual noises: Listen for grinding or rattling sounds that may indicate mec...
A limit switch is an electromechanical device that detects the presence or position of an object, often used for control and safety.
Used in industrial machinery to control the movement of parts.
Commonly found in elevators to detect the position of the elevator car.
Used in conveyor systems to stop the belt when an object is detected.
Can be used in safety applications, such as emergency stop buttons.
NO (Normally Open) and NC (Normally Closed) refer to relay contact states in electrical circuits.
NO contacts are open when the relay is not energized, allowing current to flow only when activated.
Example: A light switch that turns on a light when pressed is a NO contact.
NC contacts are closed when the relay is not energized, allowing current to flow until activated.
Example: A safety switch that cuts power when triggere...
Wiring checks ensure electrical systems are safe and functional, preventing faults and ensuring compliance with standards.
1. Visual Inspection: Check for damaged insulation or exposed wires.
2. Continuity Testing: Use a multimeter to ensure there are no breaks in the circuit.
3. Insulation Resistance Testing: Measure the resistance of insulation to prevent leakage currents.
4. Voltage Testing: Verify that the correct volt...
To solve technical issues, I follow a systematic approach involving identification, analysis, and resolution.
Identify the issue: Gather information about the problem, such as symptoms and error messages.
Analyze the root cause: Use tools like the 5 Whys or Fishbone Diagram to pinpoint the underlying issue.
Develop a solution: Brainstorm potential fixes and evaluate their feasibility.
Implement the solution: Apply the chos...
posted on 18 Feb 2021
I applied via Walk-in and was interviewed before Feb 2020. There were 3 interview rounds.
Troubleshooting of solar plant involves identifying and resolving issues related to solar panels, inverters, and electrical systems.
Check for any physical damage or debris on solar panels
Inspect wiring and connections for any loose or damaged components
Test inverters and electrical systems for proper functioning
Monitor performance data to identify any anomalies
Consult manufacturer's manuals and technical support for gu...
posted on 12 Dec 2019
I applied via Company Website and was interviewed in Jun 2019. There were 3 interview rounds.
posted on 3 Jul 2021
A substation in charge is responsible for the safe and efficient operation of an electrical substation.
Overseeing the maintenance and repair of equipment
Ensuring compliance with safety regulations
Managing a team of technicians and operators
Monitoring power flow and voltage levels
Troubleshooting and resolving issues
Coordinating with other departments and utilities
Preparing reports and documentation
I applied via Walk-in and was interviewed in Dec 2020. There were 3 interview rounds.
The company culture is collaborative, innovative, and focused on continuous improvement.
Employees are encouraged to share ideas and work together to solve problems.
The company values creativity and rewards employees who come up with innovative solutions.
There is a strong emphasis on learning and development, with opportunities for training and career growth.
The company is committed to sustainability and social responsi...
based on 3 reviews
Rating in categories
Engineer
70
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
44
salaries
| ₹0 L/yr - ₹0 L/yr |
Electrical Engineer
34
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
30
salaries
| ₹0 L/yr - ₹0 L/yr |
Technician
20
salaries
| ₹0 L/yr - ₹0 L/yr |
Suzlon Group
Azure Power
Tata Power Solar
Adani Green Energy