Upload Button Icon Add office photos

NTPC

Compare button icon Compare button icon Compare

Filter interviews by

NTPC Instrumentation Technician Interview Questions and Answers

Updated 16 Mar 2022

NTPC Instrumentation Technician Interview Experiences

1 interview found

Round 1 - HR 

(4 Questions)

  • Q1. What are your salary expectations?
  • Q2. What are your strengths and weaknesses?
  • Q3. Why are you looking for a change?
  • Q4. What is your family background?
Round 2 - Aptitude Test 

Interview Preparation Tips

Interview preparation tips for other job seekers - Instrumentation good joob
RTD, Thermocouple, Transmitter, knowledge good

Interview questions from similar companies

Interview Questionnaire 

4 Questions

  • Q1. Flow
  • Q2. Temperature
  • Q3. Pressure
  • Q4. Level
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Thurmocapul .RTD. Tt. lt. ft.contro valve Turbain vibration seting .speed settings.any other
Round 3 - Technical 

(1 Question)

  • Q1. Pressure gauge.pt. lt
Round 4 - Technical 

(1 Question)

  • Q1. Rtd. thermocouple present gauge
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Company Website

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. WIND BLADE ASSAMBLY AND LOADING TECHNICAL WORKS
  • Ans. I WAS ALLRADY RECORD IN MY COMPANY . FIRST LOADING TIME FOR 2 SETS BLADES 12 HOURS THEN MY PLAN LOADING TIME FOR 2 SETS ONLY 4 HOURES .NOW 2. 1/2 HOURES IS GOING ON.
  • Answered Anonymously
  • Q2. BEARINGS ASSAMBLY, BLADE BALANCING WORK, (BLADE KG CHEAK), SET DIVED, TEAM HANDLING , 5 S WORKS, QED WORK, REPARING WORK MAINTANANCE SERVICES WORK, SITE REPARING AND PAINT WORK , SITE TO SITE BLADE SHIFTI...
  • Q3. MY PAST COMPANY ENERCON, SUZLON, VESTAS RRB, AND MY OOLDES COMPANY IS MARDAN ENGINEERING FIBER HAND MOLDING MANUFACTURING .
  • Q4. YOU ASK ANY QUESTION

Interview Preparation Tips

Interview preparation tips for other job seekers - FIRST YOU CHECK WORK LIST (JSA), TEAM PLAN AND SAFETY PLANS AFTER TOU DO WORK
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. What do you Wark
  • Ans. 

    Fiber line bled manufacturing

  • Answered Anonymously
  • Q2. How much bled meter
  • Ans. 

    The bled meter measures the amount of fluid that has been bled off from a system.

    • The bled meter is used to monitor the bleeding of fluid from a system.

    • It helps in determining the amount of fluid that has been removed from the system.

    • The bled meter readings are important for maintaining the proper fluid levels in the system.

  • Answered by AI
  • Q3. What do you knowlege
  • Ans. 

    I have knowledge in various aspects of production engineering including process optimization, quality control, and equipment maintenance.

    • Knowledge of manufacturing processes and techniques

    • Understanding of quality control methods and tools

    • Experience with equipment maintenance and troubleshooting

    • Familiarity with lean manufacturing principles

    • Ability to analyze production data and identify areas for improvement

  • Answered by AI
Round 2 - Technical 

(3 Questions)

  • Q1. Technical Case Study coding test other
  • Q2. Technical Case Study coding test other
  • Q3. Technical Case Study coding test other

Interview Preparation Tips

Interview preparation tips for other job seekers - Mohit Kumar kori Kashar derwa Pratapgarh,UP
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Apr 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Electrical technician, LT or HT panel and motors. Transformers working or its Maintenance. House wiring and starter panel wiring.
  • Q2. Maintenance work in power plant
  • Ans. 

    Maintenance work in power plant involves regular inspections, repairs, and upgrades to ensure smooth operation and safety.

    • Regularly inspecting equipment for signs of wear and tear

    • Performing routine maintenance tasks such as lubricating moving parts

    • Repairing faulty equipment to prevent breakdowns

    • Upgrading systems to improve efficiency and safety

    • Following safety protocols to prevent accidents

    • Keeping detailed records of m

  • Answered by AI
  • Q3. All types of electrical equipment.
  • Ans. 

    All types of electrical equipment refer to a wide range of devices used for generating, transmitting, and distributing electricity.

    • Generators: devices that convert mechanical energy into electrical energy

    • Transformers: devices that change the voltage of electricity for transmission

    • Switchgear: equipment used to control, protect, and isolate electrical circuits

    • Cables and wires: used for transmitting electricity from one p...

  • Answered by AI
Round 1 - Technical 

(1 Question)

  • Q1. Transformer protection-OTI,WTI PLC ,SCADA, all over technical
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Strong your technical
knowledge

I applied via Naukri.com and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Which device to use for testing insulation?
  • Ans. 

    A megohmmeter is used for testing insulation.

    • A megohmmeter, also known as an insulation tester, is used to measure the resistance of insulation materials.

    • It applies a high voltage to the insulation and measures the current flowing through it.

    • The results help determine if the insulation is in good condition or if there are any faults or leaks.

    • Megohmmeters are commonly used in electrical and electronic industries to ensu...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - We use megger to test for insulation

Interview Questionnaire 

1 Question

  • Q1. How we can increase efficiency of boiler ?
  • Ans. 

    Efficiency of a boiler can be increased by improving insulation, optimizing combustion, and regular maintenance.

    • Improve insulation to reduce heat loss

    • Optimize combustion by adjusting air-to-fuel ratio and using efficient burners

    • Regular maintenance to clean and repair components

    • Use economizers to recover waste heat

    • Upgrade to high-efficiency boilers

    • Implement energy management systems to monitor and control boiler operati

  • Answered by AI

Interview Questionnaire 

2 Questions

  • Q1. Solar Project Related how can Check Insulation and which Divice.
  • Q2. What is SCADA
  • Ans. 

    SCADA stands for Supervisory Control and Data Acquisition. It is a system used for monitoring and controlling industrial processes.

    • SCADA systems are used in various industries such as oil and gas, water treatment, and manufacturing.

    • They consist of hardware and software components that collect and analyze data from sensors and other devices.

    • SCADA systems allow operators to remotely monitor and control processes, making ...

  • Answered by AI

Skills evaluated in this interview

NTPC Interview FAQs

How many rounds are there in NTPC Instrumentation Technician interview?
NTPC interview process usually has 2 rounds. The most common rounds in the NTPC interview process are HR and Aptitude Test.

Tell us how to improve this page.

Interview Questions from Similar Companies

Adani Power Interview Questions
3.9
 • 218 Interviews
Adani Group Interview Questions
3.9
 • 187 Interviews
Tata Power Interview Questions
3.9
 • 162 Interviews
Torrent Power Interview Questions
3.7
 • 126 Interviews
Eaton Interview Questions
3.9
 • 119 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
Vestas Interview Questions
4.3
 • 83 Interviews
GE Vernova Interview Questions
4.2
 • 83 Interviews
Hitachi Energy Interview Questions
4.1
 • 81 Interviews
View all
NTPC Instrumentation Technician Salary
based on 12 salaries
₹1.2 L/yr - ₹4 L/yr
39% less than the average Instrumentation Technician Salary in India
View more details

NTPC Instrumentation Technician Reviews and Ratings

based on 8 reviews

4.4/5

Rating in categories

4.1

Skill development

4.6

Work-life balance

4.4

Salary

3.7

Job security

4.4

Company culture

4.4

Promotions

4.5

Work satisfaction

Explore 8 Reviews and Ratings
Senior Manager
129 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy General Manager
102 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
101 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
72 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
68 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare NTPC with

Power Grid Corporation of India

4.4
Compare

BHEL

4.1
Compare

Tata Power

3.9
Compare

Adani Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview