Filter interviews by
Top trending discussions
G code is a programming language used to control CNC machines.
G code is a standardized language used to instruct CNC machines on how to perform specific tasks.
It consists of letters and numbers that represent different commands and parameters.
For example, G00 is a rapid move command that tells the machine to move quickly to a specified position.
G01 is a linear interpolation command that tells the machine to move in a s...
M code is a standard set of machine codes used to control CNC machines.
M codes are used to activate or deactivate certain functions on a CNC machine.
They are typically used for tool changes, coolant control, spindle speed, and other machine functions.
Examples of M codes include M06 for tool change and M08 for coolant on.
To give offset in CNC machining, adjust the tool position relative to the workpiece.
Access the offset settings on the CNC machine control panel.
Enter the desired offset values for length, width, and height adjustments.
Verify the offset adjustments by running a test program on scrap material.
Make fine adjustments as needed to achieve the desired machining results.
To start a CNC machine, power on the machine, load the program, set the workpiece, and press the start button.
Power on the CNC machine by flipping the switch
Load the program into the machine's control panel
Set the workpiece securely in place on the machine bed
Press the start button to begin the machining process
I applied via Campus Placement and was interviewed in Jun 2020. There were 3 interview rounds.
I applied via Walk-in and was interviewed in Jul 2020. There was 1 interview round.
Four stroke engines are more efficient and produce less pollution than two stroke engines.
Four stroke engines have a separate intake and exhaust stroke, allowing for better fuel combustion and less pollution.
Two stroke engines have a combined intake and exhaust stroke, leading to incomplete fuel combustion and more pollution.
Four stroke engines also have better fuel economy and longer lifespan than two stroke engines.
F...
I applied via Recruitment Consultant and was interviewed in Nov 2020. There was 1 interview round.
I applied via Recruitment Consultant and was interviewed before Aug 2020. There was 1 interview round.
I applied via Walk-in and was interviewed before Jan 2021. There were 3 interview rounds.
I applied via Approached by Company and was interviewed before Nov 2023. There was 1 interview round.
I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.
based on 2 interviews
Interview experience
Quality Engineer
16
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Inspector
11
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Supervisor
10
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
7
salaries
| ₹0 L/yr - ₹0 L/yr |
CNC Operator
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Motors
Mahindra & Mahindra
Maruti Suzuki
Bharat Forge