Upload Button Icon Add office photos

Filter interviews by

Mitsui Prime Advanced Composites India Junior Engineer Electrical Interview Questions and Answers

Updated 2 Feb 2024

Mitsui Prime Advanced Composites India Junior Engineer Electrical Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Feb 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. About job profile and salary discussion
Round 2 - Technical 

(3 Questions)

  • Q1. About technical knowledge
  • Q2. Team management
  • Q3. Knowledge of documentation
Round 3 - Technical 

(1 Question)

  • Q1. Again technically knowledge with japanese pland head

Interview Preparation Tips

Topics to prepare for Mitsui Prime Advanced Composites India Junior Engineer Electrical interview:
  • Interpersonal Skills
  • Electricals
  • Documentation
  • Team Management
Interview preparation tips for other job seekers - Be focus only on your work

Interview questions from similar companies

I applied via Referral and was interviewed in Feb 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. How to connection ups sysetm in parallel.
  • Ans. 

    UPS systems can be connected in parallel for redundancy and increased capacity.

    • Ensure that the UPS systems have the same voltage and frequency ratings.

    • Connect the output of each UPS system to a common bus bar.

    • Use a synchronization module to ensure that the UPS systems are in phase with each other.

    • Ensure that the load is evenly distributed between the UPS systems.

    • Perform regular maintenance and testing to ensure proper ...

  • Answered by AI
  • Q2. What is the cycle of Chiller operation
  • Ans. 

    Chiller operation cycle involves refrigerant compression, condensation, expansion, and evaporation.

    • Refrigerant is compressed by the compressor

    • The compressed refrigerant is then condensed in the condenser

    • The high-pressure liquid refrigerant then passes through an expansion valve

    • The refrigerant then evaporates in the evaporator, absorbing heat from the chilled water

    • The low-pressure refrigerant then returns to the compres

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice interview experience in my life
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is transformer
  • Ans. 

    A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Transformers are used to increase or decrease voltage levels in electrical circuits.

    • They consist of two coils of wire, known as the primary and secondary coils, wrapped around a core.

    • Step-up transformers increase voltage levels, while step-down transformers decrease voltage levels.

    • Transformers are e...

  • Answered by AI
  • Q2. What is the type of motor
  • Ans. 

    The type of motor refers to the classification based on the design and operation of the motor.

    • There are various types of motors such as DC motors, AC motors, synchronous motors, induction motors, etc.

    • The type of motor is determined by factors like the power source, speed control, and construction.

    • Each type of motor has its own advantages and applications in different industries.

    • For example, DC motors are commonly used ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Best of luck ever junior engineer
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(6 Questions)

  • Q1. What is transformer?
  • Ans. 

    A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Consists of two coils of wire, known as primary and secondary coils

    • Primary coil receives electrical energy and creates a magnetic field

    • Magnetic field induces a voltage in the secondary coil, transferring energy

    • Used to step up or step down voltage in power distribution systems

    • Examples include power t...

  • Answered by AI
  • Q2. Types of transformer?
  • Ans. 

    Types of transformers include step-up, step-down, isolation, autotransformer, and instrument transformer.

    • Step-up transformer increases voltage

    • Step-down transformer decreases voltage

    • Isolation transformer provides electrical isolation between primary and secondary windings

    • Autotransformer has a single winding with multiple taps

    • Instrument transformer is used for measuring current or voltage in high voltage circuits

  • Answered by AI
  • Q3. What is current transformer?
  • Ans. 

    A current transformer is a type of instrument transformer that is used to measure alternating current.

    • Current transformers step down current to a safe level for measurement or protection purposes.

    • They have a primary winding connected in series with the circuit carrying the current to be measured.

    • The secondary winding is connected to measuring or protective devices.

    • Current transformers are commonly used in power systems...

  • Answered by AI
  • Q4. What is difference between current transformer and potential transformer?
  • Ans. 

    Current transformer is used to measure current while potential transformer is used to measure voltage.

    • Current transformer is connected in series with the circuit being measured, while potential transformer is connected in parallel.

    • Current transformer steps down the current to a measurable level, while potential transformer steps down the voltage.

    • Current transformer is used for protection and metering purposes, while po...

  • Answered by AI
  • Q5. What is current
  • Ans. 

    Current is the flow of electric charge in a circuit.

    • Current is measured in Amperes (A).

    • It is the rate of flow of electric charge past a point in a circuit.

    • Current can be either direct current (DC) or alternating current (AC).

    • In a series circuit, the current is the same at all points.

    • In a parallel circuit, the total current is divided among the branches.

    • Ohm's Law relates current, voltage, and resistance: I = V/R.

  • Answered by AI
  • Q6. What is voltage
  • Ans. 

    Voltage is the difference in electric potential between two points in a circuit, measured in volts.

    • Voltage is the driving force that pushes electric current through a circuit

    • It is measured in volts (V)

    • Higher voltage means more potential energy available to move electrons

    • Voltage can be DC (direct current) or AC (alternating current)

    • Example: A battery provides a voltage of 1.5V to power a flashlight

  • Answered by AI

Interview Preparation Tips

Topics to prepare for TCS Junior Engineer Electrical interview:
  • Training
Interview preparation tips for other job seekers - Good

I applied via Referral and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basic concept question.

Interview Preparation Tips

Interview preparation tips for other job seekers - Basics should be clear. Some scenario based questions based on business rules and FDMEE data load

I applied via Naukri.com and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

Aptitude and English test

Round 2 - Technical 

(1 Question)

  • Q1. Technical round to test technical skills
Round 3 - HR 

(1 Question)

  • Q1. This was fun. It'll take few minutes.

Interview Preparation Tips

Interview preparation tips for other job seekers - Need to prepare hard.company will be taking people on basis of their technology requirements and needs

Analyst Interview Questions & Answers

Wipro user image Anonymous

posted on 23 Feb 2021

Interview Questionnaire 

1 Question

  • Q1. Previous Project Experience

I applied via Company Website and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is recursion ? what is inheritance? what is heap? write a code to find the largest element in an array?
  • Ans. 

    Recursion is a process in which a function calls itself. Inheritance is a mechanism in OOP where a class inherits properties of another class. Heap is a region of memory used for dynamic memory allocation.

    • Recursion can be used to solve problems that can be broken down into smaller sub-problems.

    • Inheritance allows for code reuse and helps in creating a hierarchy of classes.

    • Heap is used for dynamic memory allocation in la...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do not loose your confidence till the end of the interview and be clear with your voice .

Skills evaluated in this interview

I applied via Naukri.com and was interviewed before Apr 2020. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basic questions only ... regarding job and experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident ... always say the truth ... never try to fake your details

I applied via Naukri.com and was interviewed before Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Why are you looking for job change
  • Q2. Question about job profile

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well for interview as selection process can be time consuming

Mitsui Prime Advanced Composites India Interview FAQs

How many rounds are there in Mitsui Prime Advanced Composites India Junior Engineer Electrical interview?
Mitsui Prime Advanced Composites India interview process usually has 3 rounds. The most common rounds in the Mitsui Prime Advanced Composites India interview process are Technical and HR.
What are the top questions asked in Mitsui Prime Advanced Composites India Junior Engineer Electrical interview?

Some of the top questions asked at the Mitsui Prime Advanced Composites India Junior Engineer Electrical interview -

  1. Again technically knowledge with japanese pland h...read more
  2. About technical knowle...read more
  3. Knowledge of documentat...read more

Tell us how to improve this page.

Mitsui Prime Advanced Composites India Junior Engineer Electrical Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.6k Interviews
Accenture Interview Questions
3.8
 • 8.3k Interviews
Infosys Interview Questions
3.6
 • 7.7k Interviews
Wipro Interview Questions
3.7
 • 5.7k Interviews
Cognizant Interview Questions
3.7
 • 5.7k Interviews
Amazon Interview Questions
4.0
 • 5.1k Interviews
Capgemini Interview Questions
3.7
 • 4.8k Interviews
HCLTech Interview Questions
3.5
 • 3.9k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.9k Interviews
Genpact Interview Questions
3.8
 • 3.2k Interviews
View all
Executive SCM
7 salaries
unlock blur

₹3.8 L/yr - ₹5.1 L/yr

HR Executive
6 salaries
unlock blur

₹3.7 L/yr - ₹5 L/yr

Purchase Executive
6 salaries
unlock blur

₹3.7 L/yr - ₹6.5 L/yr

Sales Executive
6 salaries
unlock blur

₹4 L/yr - ₹6.5 L/yr

Executive
6 salaries
unlock blur

₹4.5 L/yr - ₹5.8 L/yr

Explore more salaries
Compare Mitsui Prime Advanced Composites India with

TCS

3.7
Compare

Accenture

3.8
Compare

Wipro

3.7
Compare

Cognizant

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview