Filter interviews by
Fiber cable is a high-speed data transmission cable made of glass or plastic fibers.
Fiber cable is used for transmitting data over long distances.
It is made up of thin strands of glass or plastic fibers that are bundled together.
Fiber cable is faster and more reliable than traditional copper cables.
It is commonly used in telecommunications, internet, and cable TV networks.
Fiber cable is also used in medical equipment a
The power required for fiber cables varies depending on the type and length of the cable.
Single-mode fiber cables typically require less power than multi-mode fiber cables.
The power required also depends on the length of the cable and the number of connections.
For example, a 10 km single-mode fiber cable may require around 1 watt of power.
However, a 10 km multi-mode fiber cable may require up to 10 watts of power.
Power...
A fast connector is a pre-polished, field-installable fiber optic connector that eliminates the need for epoxy and polishing.
Fast connectors are used to terminate fiber optic cables quickly and easily in the field.
They are designed to be installed without special tools or training.
Fast connectors are available in various types, including SC, LC, and ST connectors.
Examples of fast connector brands include 3M, Corning, a
Fiber optic cable is used for internet.
Fiber optic cable uses light to transmit data
It is faster and more reliable than traditional copper cables
Fiber optic cables are used for long distance connections
Examples of fiber optic cables include single-mode and multi-mode cables
The R45 code refers to a specific standard or regulation related to fiber engineering.
The R45 code is used in the field of fiber engineering to ensure compliance with specific standards and regulations.
It may refer to a code or specification that outlines the requirements for fiber optic cables, connectors, or installations.
The R45 code may vary depending on the country or organization, so it's important to understand
Top trending discussions
Normal . Keep calm stay focused. Study hard work smart.
Great
posted on 20 Jul 2020
I applied via Referral and was interviewed before Jul 2019. There was 1 interview round.
The type of transformer used in telecom tower sites is typically a step-down transformer.
Step-down transformers are used to reduce the high voltage from the power grid to a lower voltage suitable for telecom equipment.
These transformers are usually single-phase and have a power rating of a few kilovolt-amperes (kVA).
They are designed to provide a stable and reliable power supply to the telecom equipment at the tower si...
SMPS stands for Switched Mode Power Supply, which is an electronic power supply that uses a switching regulator to convert electrical power efficiently.
SMPS is commonly used in electronic devices such as computers, televisions, and mobile phones.
It uses a switching regulator to convert AC power to DC power.
SMPS is more efficient than traditional linear power supplies.
It can be designed to provide different output volta...
A rectifier is an electrical device that converts alternating current (AC) to direct current (DC).
Rectifiers are commonly used in power supplies and electronic devices.
They typically consist of diodes that allow current to flow in only one direction.
Rectifiers can be half-wave or full-wave, depending on the number of diodes used.
Examples of rectifiers include bridge rectifiers, vacuum tube rectifiers, and solid-state r
PAC stands for Programmable Automation Controller, a type of industrial control system used for automation and monitoring.
PACs are similar to PLCs but have more advanced capabilities such as data processing and communication.
They are used in various industries including manufacturing, energy, and transportation.
PACs can be programmed using various languages such as ladder logic, structured text, and C++.
Examples of PAC...
PID controller is a feedback control mechanism used in engineering to regulate a system's output.
PID stands for Proportional-Integral-Derivative
It continuously calculates an error value as the difference between a desired setpoint and a measured process variable
It uses three control terms to adjust the output and bring the error to zero
It is widely used in industries such as manufacturing, robotics, and automation
Examp...
PLC stands for Programmable Logic Controller. It is a digital computer used for automation of electromechanical processes.
PLC is used to control industrial processes such as assembly lines, robotic devices, and packaging systems.
It uses a programmable memory to store instructions and execute them in a sequential manner.
PLC can communicate with other devices such as sensors, actuators, and human-machine interfaces.
It is...
I applied via Approached by Company and was interviewed in Jul 2024. There were 3 interview rounds.
Testing and debugging
I applied via Walk-in and was interviewed in Nov 2023. There were 3 interview rounds.
Math, science any other
I applied via Approached by Company and was interviewed in Jan 2023. There were 3 interview rounds.
posted on 28 Feb 2025
I appeared for an interview before Feb 2024.
based on 1 interview
Interview experience
Network Engineer
56
salaries
| ₹1.8 L/yr - ₹6.5 L/yr |
Executive Accountant
11
salaries
| ₹1.9 L/yr - ₹3.8 L/yr |
Revenue Assurance Executive
11
salaries
| ₹2.1 L/yr - ₹3.2 L/yr |
Team Lead
9
salaries
| ₹4 L/yr - ₹5.5 L/yr |
Business Development Manager
9
salaries
| ₹4 L/yr - ₹6.9 L/yr |
Reliance Communications
Henry Harvin Education
GAO Tek
Tata Teleservices