Filter interviews by
There are several types of reactors, including pressurized water reactors, boiling water reactors, and gas-cooled reactors.
Pressurized water reactors (PWRs) use water as both a coolant and a moderator.
Boiling water reactors (BWRs) use water as a coolant and a moderator, but the water boils to produce steam that drives the turbine.
Gas-cooled reactors use carbon dioxide or helium as a coolant.
Other types of reactors incl...
The reactor model is the design and layout of the nuclear reactor used for power generation.
The reactor model determines the fuel type, fuel arrangement, coolant type, and control mechanisms.
Examples of reactor models include pressurized water reactors (PWR), boiling water reactors (BWR), and heavy water reactors (HWR).
The reactor model also affects the safety features and emergency response plans for the power plant.
T...
Stirrers are used to mix substances. There are different types of stirrers available for different purposes.
Magnetic stirrer
Overhead stirrer
Propeller stirrer
Anchor stirrer
Paddle stirrer
Types of cleaning include routine cleaning, deep cleaning, and specialized cleaning.
Routine cleaning involves regular maintenance cleaning, such as dusting and vacuuming.
Deep cleaning involves a more thorough cleaning, such as cleaning carpets and upholstery.
Specialized cleaning involves cleaning specific areas or items, such as medical equipment or industrial machinery.
Other types of cleaning include green cleaning, w...
Cleaning solution is changed at defined frequency to maintain its effectiveness and prevent contamination.
Cleaning solution can become contaminated with dirt, bacteria, and other debris over time, reducing its effectiveness.
Regularly changing the cleaning solution ensures that it remains effective in removing dirt and bacteria.
The frequency of cleaning solution changes may vary depending on the type of solution and the...
Deviation refers to the difference between actual and expected results. Types include positive, negative, constant, and random.
Positive deviation occurs when actual results are higher than expected, e.g. sales exceeding targets.
Negative deviation occurs when actual results are lower than expected, e.g. production falling short of targets.
Constant deviation occurs when actual results consistently differ from expected by...
Change control is a process of managing changes to a system or product to ensure quality and minimize risks.
Types of change control include preventive, corrective, adaptive, and perfective.
Preventive change control aims to prevent problems before they occur, such as implementing security measures to prevent data breaches.
Corrective change control addresses problems that have already occurred, such as fixing a bug in so...
CAPA stands for Corrective and Preventive Action. It is a process used to identify and address problems in a system.
Corrective action involves addressing a problem that has already occurred, while preventive action involves taking steps to prevent a problem from occurring in the future.
Examples of CAPA include investigating a customer complaint, identifying the root cause of a quality issue, and implementing a new proc...
ISRS stands for International Safety Rating System. It is a safety management system used in the maritime industry.
ISRS is a tool used to assess and improve safety management on ships.
It was developed by the International Association of Classification Societies (IACS).
ISRS consists of 12 elements, including management commitment, risk assessment, and emergency preparedness.
Each element is rated on a scale of 1-5, with ...
Reworking and reprocess are methods of correcting or improving a product or process.
Reworking involves correcting defects or errors in a product that has already been made.
Reprocessing involves taking a product that has been made and processing it again to improve its quality or functionality.
Both methods are used to improve the quality of a product or process and ensure that it meets the required standards.
Examples of...
Unit process and unit operation are terms used in chemical engineering to describe different stages of a chemical process.
Unit process refers to a single chemical transformation step in a process, such as distillation or filtration.
Unit operation refers to a physical transformation step in a process, such as mixing or heat transfer.
Unit processes and unit operations are combined to form a complete chemical process.
Exam...
Water is a chemical compound while moisture content is the amount of water present in a substance.
Water is H2O while moisture content is the percentage of water in a substance.
Water is a pure substance while moisture content is a measure of impurities in a substance.
Water can exist in different forms (liquid, solid, gas) while moisture content is always a percentage.
Examples of moisture content include the amount of wa...
Distillation is a process of separating components of a mixture based on their boiling points. There are two main types of distillation: fractional and simple.
Simple distillation is used to separate components with a large difference in boiling points.
Fractional distillation is used to separate components with a smaller difference in boiling points.
Examples of simple distillation include the separation of water from sa...
I applied via Recruitment Consultant and was interviewed in Feb 2021. There were 3 interview rounds.
QMS stands for Quality Management System.
QMS is a set of policies, processes, and procedures implemented to ensure quality in an organization.
It helps in meeting customer requirements and improving overall efficiency.
QMS includes activities such as quality planning, quality control, quality assurance, and quality improvement.
It is often based on international standards like ISO 9001.
QMS can be applied in various indust...
Deviation refers to any departure from the expected or standard procedure.
Deviation can occur in various aspects such as behavior, performance, or results.
Examples of deviations can include failure to follow protocols, exceeding budget limits, or producing subpar work.
Deviation can be identified through monitoring, audits, or feedback from supervisors or colleagues.
Addressing deviations often involves corrective action
I applied via Recruitment Consulltant
I applied via Approached by Company and was interviewed in Jun 2021. There were 3 interview rounds.
I am looking for a change to further develop my skills and take on new challenges.
Seeking new opportunities for growth and advancement
Desire to expand my knowledge and expertise
Looking for a more challenging and fulfilling role
Want to work in a dynamic and innovative environment
Seeking better work-life balance
I applied via Walk-in and was interviewed in May 2023. There were 3 interview rounds.
Equipment cleaning involves thorough disinfection and sterilization to prevent contamination.
Use appropriate cleaning agents and disinfectants recommended for the specific equipment
Follow manufacturer's instructions for cleaning and maintenance
Regularly inspect equipment for any signs of wear or damage
Implement proper storage practices to prevent contamination
Train staff on proper cleaning procedures and protocols
Contamination can be classified into three main types: chemical, biological, and physical.
Chemical contamination involves the presence of harmful chemicals in a substance or environment.
Biological contamination refers to the presence of harmful microorganisms such as bacteria, viruses, or fungi.
Physical contamination occurs when foreign objects like glass, metal, or plastic are present in a substance.
I applied via Company Website and was interviewed before May 2022. There were 2 interview rounds.
I am known for my ability to inspire and motivate others to achieve their goals.
I have a natural talent for identifying people's strengths and helping them to develop those strengths.
I am a skilled communicator and can effectively convey my ideas and vision to others.
I have a positive attitude and am able to maintain a sense of optimism even in challenging situations.
I lead by example and am always willing to roll up m...
Batch charging processing refers to the process of charging multiple items at once.
Batch charging processing is commonly used in industries such as manufacturing and logistics.
It involves charging multiple items simultaneously, which can save time and increase efficiency.
Examples of batch charging processing include charging multiple electric vehicles at a charging station or charging multiple batteries in a warehouse.
...
Yes, I am familiar with CAPA process and validation deviation process.
CAPA (Corrective and Preventive Action) process is a quality management system used to identify, investigate, and resolve quality issues.
Validation deviation process is used to document and investigate any deviations from the validated process or procedure.
Both processes are important in ensuring quality and compliance in various industries, includin...
I applied via LinkedIn and was interviewed before Aug 2022. There were 4 interview rounds.
based on 21 reviews
Rating in categories
Territory Manager
114
salaries
| ₹1.8 L/yr - ₹5.5 L/yr |
Officer
99
salaries
| ₹2.5 L/yr - ₹5.5 L/yr |
Regional Sales Manager
84
salaries
| ₹6.8 L/yr - ₹12.1 L/yr |
Medical Representative
83
salaries
| ₹1.8 L/yr - ₹4.5 L/yr |
Research Associate
57
salaries
| ₹3 L/yr - ₹6.5 L/yr |
Hetero
Abbott
Micro Labs
Ajanta Pharma