Magna International
20+ Grayeye IT Systems Interview Questions and Answers
Q1. Base practice in ASPICE for system requirement
Base practice in ASPICE for system requirement is to define clear, complete, and consistent requirements.
Define clear and unambiguous system requirements
Ensure requirements are complete and cover all necessary aspects
Maintain consistency between system requirements and other project artifacts
Use tools like DOORS for requirement management
Q2. What is the unit of resistance ?
The unit of resistance is Ohm (Ω).
The unit of resistance is denoted by the symbol Ω (Ohm)
Resistance is measured in Ohms
Named after German physicist Georg Simon Ohm
Commonly used in electrical circuits
Q3. What is Diagnostic in ECU
Diagnostic in ECU refers to the process of identifying and troubleshooting issues within the Electronic Control Unit of a vehicle.
Diagnostic in ECU involves using specialized tools and software to read error codes and data from the ECU.
It helps in identifying issues related to engine performance, emissions, and other systems controlled by the ECU.
Diagnostic tests can be performed to pinpoint the exact cause of a problem and facilitate repairs.
Regular diagnostics can help prev...read more
Q4. Draw shear stress and bending moment diagram of cantilever beam
Draw shear stress and bending moment diagram of cantilever beam
Shear stress diagram shows the distribution of shear stress along the length of the beam
Bending moment diagram shows the distribution of bending moment along the length of the beam
Shear stress is maximum at the fixed end and zero at the free end
Bending moment is maximum at the fixed end and zero at the free end
The diagrams can be drawn using equations and boundary conditions
Q5. What is ASPICE ?
ASPICE stands for Automotive SPICE, a framework for software development in the automotive industry.
ASPICE is a standard used in the automotive industry to assess and improve software development processes.
It helps ensure that software in automotive systems is developed efficiently and meets quality standards.
ASPICE defines a set of processes and practices that organizations can follow to achieve higher levels of maturity in software development.
Examples of ASPICE processes i...read more
Q6. What is voltage define it?
Voltage is the difference in electric potential between two points in a circuit, measured in volts.
Voltage is the force that pushes electric current through a circuit
It is measured in volts (V)
Voltage is the potential difference between two points in a circuit
Higher voltage means more energy available to move electrons
Voltage can be DC (direct current) or AC (alternating current)
Q7. How to Handle Pressure during Work load
Handling pressure during work load requires effective time management, prioritization, delegation, and stress management techniques.
Create a to-do list and prioritize tasks based on urgency and importance
Delegate tasks to team members if possible
Take breaks and practice stress management techniques such as deep breathing or meditation
Communicate with colleagues and managers about workload and seek support if needed
Maintain a positive attitude and focus on solutions rather tha...read more
Q8. What is your experience in feature development
I have extensive experience in feature development, having worked on multiple projects and delivered successful features.
Developed features for various software applications
Collaborated with cross-functional teams to gather requirements and design solutions
Implemented features using agile methodologies and best practices
Conducted testing and debugging to ensure quality and functionality
Continuously improved features based on user feedback and data analysis
Q9. What is the combustion chamber ,?
The combustion chamber is where fuel and air are mixed and burned in an internal combustion engine.
It is a part of an internal combustion engine where the fuel-air mixture is ignited and burned.
The combustion chamber is designed to contain and control the combustion process.
It is typically located within the cylinder head of an engine.
The shape and design of the combustion chamber can affect engine performance and efficiency.
Q10. Communication protocols in Electronics
Communication protocols are a set of rules that govern the exchange of data between electronic devices.
Protocols ensure that devices can communicate with each other effectively and efficiently.
Examples of communication protocols include Bluetooth, Wi-Fi, and Ethernet.
Protocols can be either wired or wireless, and can be used for different purposes such as data transfer, device control, and synchronization.
Some protocols are standardized, while others are proprietary and speci...read more
Q11. Explain ADAS feature
ADAS stands for Advanced Driver Assistance Systems, which are safety features designed to assist drivers in the driving process.
ADAS features use sensors and cameras to monitor the vehicle's surroundings and provide warnings or assistance to the driver.
Examples of ADAS features include adaptive cruise control, lane departure warning, automatic emergency braking, and blind spot detection.
These features help improve safety, reduce accidents, and enhance the overall driving expe...read more
Q12. Python code to write Fibonacci series
Python code to write Fibonacci series
Use a loop to generate the series
Start with 0 and 1 as the first two numbers
Add the previous two numbers to get the next number
Q13. Python code to print an Armstrong number
Python code to print an Armstrong number
An Armstrong number is a number that is equal to the sum of its own digits raised to the power of the number of digits
Loop through the range of numbers and check if each number is an Armstrong number
Use the len() function to get the number of digits in a number
Use the pow() function to raise a number to a power
Use the sum() function to get the sum of a list of numbers
Q14. Define the ohm law
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage across it and inversely proportional to the resistance.
Ohm's Law is represented by the formula V = IR, where V is voltage, I is current, and R is resistance.
It helps in calculating the relationship between voltage, current, and resistance in an electrical circuit.
It is named after the German physicist Georg Simon Ohm who first formulated it in 1827.
Q15. Explain the refrigerant system?.
Refrigerant system is a closed loop system that absorbs heat from a low-temperature area and releases it in a high-temperature area.
Refrigerant circulates through the system to absorb and release heat
Compressor increases the pressure of the refrigerant gas
Condenser cools the refrigerant gas into a liquid
Expansion valve reduces the pressure of the liquid refrigerant
Evaporator absorbs heat from the surrounding area to cool it down
Common refrigerants include R-134a, R-410A, and ...read more
Q16. Rotate the list by 2 indices
Rotate a list by 2 indices
Create a new list and add elements from the original list starting from index 2 to the end
Add elements from the original list starting from index 0 to 1 at the end of the new list
Alternatively, swap the first 2 elements with the last 2 elements, then rotate the remaining elements
Q17. What is polymorphism
Polymorphism is the ability of a function or method to behave differently based on the object it is acting upon.
Polymorphism allows objects of different classes to be treated as objects of a common superclass.
There are two types of polymorphism: compile-time (method overloading) and runtime (method overriding).
Example: Inheritance allows a child class to override a method from its parent class, providing different functionality.
Q18. Why You choose java
I chose Java for its platform independence, strong community support, and extensive libraries.
Platform independence allows Java code to run on any device with a JVM
Strong community support ensures access to resources and help when needed
Extensive libraries provide pre-built solutions for common programming tasks
Q19. Types of welding and its defects
Q20. Procedure for inward
The procedure for inward involves receiving, inspecting, and storing incoming goods in the warehouse.
Receive the goods from the supplier
Inspect the goods for any damages or discrepancies
Verify the quantity and quality of the goods
Record the details of the incoming goods in the inventory system
Assign a location for storage
Label the goods with appropriate identification
Arrange for transportation of the goods to the designated storage area
Top HR Questions asked in Grayeye IT Systems
Interview Process at Grayeye IT Systems
Top Interview Questions from Similar Companies
Reviews
Interviews
Salaries
Users/Month