Lin Scan Advanced Pipeline And Tank Services Interview Questions and Answers

Technical aptitude related to wiring, symbol identify, software related

Q1. EPLAN software macros type, Report generation, Black up, restore process, black box, structure box, Q2: Heat load calculation Q3: RFQ Full form process Q4: Switchgear selection Q5: MCB type, working.
Add your answer

Q1. EPLAN software Version, AutoCAD software
Add your answer
Q2. Work pressure handling capacity
Add your answer

Q1. Wind calculation as per IS code
Ans. 
The procedure for wind calculation as per IS code involves determining the design wind speed, selecting the appropriate terrain category, and calculating the wind pressure.
• Determine the design wind speed based on the location and height of the structure.

• Select the appropriate terrain category (rural, urban, etc.) as per IS code guidelines.

• Calculate the wind pressure using the formula provided in the IS code.

• Consider fa...read more
Answered by AI
Add your answer
Q2. SFD and BMD of cantilever beam
Add your answer
Q3. Staad model for fixed pole
Ans. 
A STAAD model for a fixed pole is a structural analysis and design model used to determine the stability and strength of a pole that is fixed in place.
• In a STAAD model for a fixed pole, the pole is typically modeled as a vertical member with fixed supports at the base.

• The model considers factors such as wind loads, dead loads, and any other relevant loads that may act on the pole.

• The analysis helps in determining the s...read more
Answered by AI
Add your answer
Q4. Design of Square base plate
Ans. 
Key considerations in designing a square base plate
• Ensure the base plate is large enough to support the load without excessive deflection

• Select appropriate material and thickness to meet structural requirements

• Consider the connection details for attaching the base plate to the structure

• Account for any potential corrosion or environmental factors that may affect the base plate

• Include provisions for anchor bolts or other...read more
Answered by AI
Add your answer

Q1. What is your name
Ans. 
My name is John Smith.
• Full name is John Smith

• Common name in English-speaking countries

• Easy to remember and pronounce
Answered by AI
Add your answer
Q2. How much experience you have
Ans. 
I have 2 years of experience working as a Junior Assistant in a busy office environment.
• 2 years of experience as a Junior Assistant

• Proficient in office administration tasks

• Skilled in using Microsoft Office suite

• Excellent communication and organizational skills
Answered by AI
Add your answer
Q3. Which type of project you done
Ans. 
I have worked on various types of projects including data analysis, event planning, and marketing campaigns.
• Data analysis project for a retail company to identify customer trends

• Event planning project for a charity fundraiser event

• Marketing campaign project for a new product launch
Answered by AI
Add your answer
Q4. Which type of machine you operate our know
Ans. 
I have experience operating various types of office equipment such as printers, scanners, and copiers.
• Printers

• Scanners

• Copiers
Answered by AI
Add your answer
Q5. How to plan for production tomorrow
Ans. 
To plan for production tomorrow, it is important to assess current inventory, review upcoming orders, allocate resources, and communicate with team members.
• Assess current inventory levels to determine what needs to be produced

• Review upcoming orders to prioritize production schedule

• Allocate resources such as materials, equipment, and manpower accordingly

• Communicate with team members to ensure everyone is aware of their
Answered by AI
Add your answer

Q1. What is the least count of micrometer and caliper
Ans. 
The least count of a micrometer is 0.01 mm and the least count of a caliper is 0.02 mm.
• Micrometer least count: 0.01 mm

• Caliper least count: 0.02 mm
Answered by AI
Add your answer
Q2. What is conncetricity,total runout, flatness,rf and rt
Ans. 
Concentricity, total runout, flatness, rf, and rt are important measurements in engineering and manufacturing.
• Concentricity refers to the tolerance of the center point of a feature relative to its axis.

• Total runout measures the maximum amount a feature may vary from true circularity when rotated.

• Flatness is the deviation of a surface from a perfect plane.

• Rf (roughness factor) and Rt (roughness total) are measurements o...read more
Answered by AI
Add your answer

Q1. Witch type transformer use in elevator?
Add your answer
Q2. Difference in open loop or close loop
Add your answer

Q1. Questions related to electronics and motors.
Add your answer

Q1. Self Intro Basic questions on electronics
Add your answer

Q1. Questions related to core mechanical engg
Add your answer
Q2. Product related questions
Add your answer

Q1. First angle and third angle symbol
Ans. 
First angle and third angle symbols are used in engineering drawings to indicate the orientation of the views.
• First angle projection is commonly used in Europe and Asia, where the top view is placed below the front view.

• Third angle projection is commonly used in North America, where the top view is placed above the front view.

• The symbol for first angle projection is a triangle with the number 1 inside, while the symbol...read more
Answered by AI
Add your answer
Q2. Welding symbols
Add your answer
Q3. Types of gears and bearings
Ans. 
Types of gears include spur, helical, bevel, worm, rack and pinion. Types of bearings include ball, roller, plain, and fluid bearings.
• Types of gears: spur, helical, bevel, worm, rack and pinion

• Types of bearings: ball, roller, plain, fluid
Answered by AI
Add your answer
Q4. Four Heat treatment process name
Ans. 
Four common heat treatment processes are annealing, quenching, tempering, and normalizing.
• Annealing involves heating the material to a specific temperature and then slowly cooling it to relieve internal stresses and increase ductility.

• Quenching is a rapid cooling process used to harden materials by forming a martensitic structure.

• Tempering is a heat treatment process that involves reheating the quenched material to a s...read more
Answered by AI
Add your answer
Q5. Welding,brazing and soldering difference between them.
Ans. 
Welding joins two metal pieces by melting them together, brazing joins them with a filler metal at lower temperatures, and soldering joins them with an even lower melting point filler metal.
• Welding involves melting the base metals and adding a filler material to create a strong joint, typically at high temperatures.

• Brazing uses a filler metal with a melting point above 450°C but below the melting point of the base meta...read more
Answered by AI
Add your answer
Q6. CSK bolt drawing
Add your answer
Q7. Tpi and bsp dull form
Add your answer

Coding+ mcqs questions are there. It is time based test.

Q1. Mechanical related questions. About pumps, turbines etc
Add your answer
Q2. Also sql, c# questions
Add your answer

Q1. Advanced mechanical question
Add your answer
Q2. Advanced sql, c# questions
Add your answer