Upload Button Icon Add office photos

Liebherr

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Liebherr Senior Service Engineer Interview Questions and Answers

Updated 4 Jun 2021

Liebherr Senior Service Engineer Interview Experiences

1 interview found

I applied via Company Website and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Tell me about yourself in brief
  • Q2. Engine related troubleshooting
  • Q3. Variable axial piston pump how works
  • Ans. 

    A variable axial piston pump is a type of hydraulic pump that uses a rotating cylinder block with pistons to generate fluid flow.

    • The pump consists of a cylinder block with multiple pistons arranged in a circular pattern.

    • As the cylinder block rotates, the pistons move in and out of their respective cylinder bores.

    • The movement of the pistons creates a reciprocating motion, which draws in and pushes out hydraulic fluid.

    • Th...

  • Answered by AI
  • Q4. Basic electrical

Interview Preparation Tips

Interview preparation tips for other job seekers - Candidate should have basic knowledge is enough. Based on my selection

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. Psi mins full form
  • Ans. 

    PSI stands for Pounds per Square Inch, a unit of pressure measurement commonly used in engineering and physics.

    • PSI is used to measure pressure in various systems, such as in pneumatic tools, hydraulic systems, and air compressors.

    • 1 PSI is equal to 0.068046 atmospheres or 6,894.76 Pascals.

    • For example, a car tire may require inflation to 32 PSI for optimal performance.

  • Answered by AI
  • Q2. Firing strocks position
  • Ans. 

    Firing strokes position refers to the position of the firing strokes in an engine.

    • Firing strokes position is crucial for the proper functioning of the engine.

    • The firing order of the engine determines the position of the firing strokes.

    • Incorrect firing strokes position can lead to engine misfires or damage.

    • Common firing orders include 1-3-4-2 for a 4-cylinder engine and 1-8-4-3-6-5-7-2 for a V8 engine.

  • Answered by AI
  • Q3. How to work hyd.pump
  • Ans. 

    To work a hydraulic pump, you need to understand its components and operation.

    • Understand the basic components of a hydraulic pump such as the inlet, outlet, and pistons.

    • Ensure the pump is properly connected to a power source and the hydraulic system.

    • Monitor the pump's pressure and flow rate to ensure optimal performance.

    • Regularly check and maintain the pump to prevent any malfunctions or breakdowns.

    • Examples: Gear pump,

  • Answered by AI
  • Q4. Injectors leack off test
  • Q5. How to use torque gun
  • Ans. 

    A torque gun is a tool used to apply torque to fasteners such as nuts and bolts.

    • Ensure the torque gun is set to the correct torque value for the fastener being tightened.

    • Hold the torque gun perpendicular to the fastener and apply pressure while pulling the trigger.

    • Listen for the click or beep indicating the desired torque has been reached.

    • Do not over-tighten the fastener as it can cause damage.

    • Regularly calibrate and m

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basic automobile stuffs, about vehicle working
  • Q2. Warranty processes in dealership
  • Ans. 

    Warranty processes in dealership involve handling warranty claims, coordinating with manufacturers, and ensuring customer satisfaction.

    • Understanding the warranty terms and conditions set by manufacturers

    • Processing warranty claims accurately and efficiently

    • Coordinating with manufacturers for approvals and reimbursements

    • Ensuring timely repairs or replacements under warranty

    • Maintaining records of warranty claims and repai

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. About myself,strength & weakness

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well.

I applied via Company Website and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Coding Test 

Alfabet

Interview Preparation Tips

Interview preparation tips for other job seekers - Maitanace engineer ,maintain all
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Step by procedure if boom life is not working
  • Ans. 

    The step-by-step procedure if boom life is not working

    • Check the power supply to the boom lift

    • Inspect the control panel for any error codes or indicators

    • Ensure all safety switches are engaged properly

    • Inspect the hydraulic system for any leaks or malfunctions

    • Check the boom lift's batteries and charging system

    • Verify if the emergency stop button is engaged or if any other safety features are activated

    • Consult the boom lift'...

  • Answered by AI
  • Q2. How to cheack boom hoist
  • Ans. 

    To check boom hoist, inspect the wire rope, drum, brake, and hydraulic system.

    • Inspect the wire rope for any signs of wear or damage.

    • Check the drum for any cracks or deformities.

    • Test the brake to ensure it is functioning properly.

    • Inspect the hydraulic system for any leaks or malfunctions.

    • Perform load testing to ensure the boom hoist can handle the required weight.

    • Check the boom hoist control system for any faults or err

  • Answered by AI
  • Q3. Make sure that boom hoist properly attached and aligned make sure that hoist cable is correctly positioned and that boom is not bend or damaged
Round 3 - Technical 

(1 Question)

  • Q1. How many types of cranes
  • Ans. 

    There are several types of cranes used in various industries for lifting and moving heavy objects.

    • Mobile cranes: These are versatile cranes mounted on wheels or tracks and can be easily transported to different locations.

    • Tower cranes: These are tall cranes often used in construction sites to lift heavy materials to great heights.

    • Overhead cranes: These cranes are typically used in factories or warehouses to move heavy l...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong and confident be revised at least in basic fundamentals in technical knowledge

I applied via Approached by Company and was interviewed in Feb 2018. There were 6 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Hydraulic and electrical
  • Q2. Hydraulic and electrical related

Interview Preparation Tips

Round: Resume Shortlist
Experience: *****

Round: Group Discussion
Experience: Hydraulic or electrical

General Tips: Yes
Skills: Electrical Machines, Electrical Machines
Duration: 1-4 weeks
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I was interviewed in Jun 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Graduation year?
Round 3 - Technical 

(1 Question)

  • Q1. Draw a hydraulic circuit
  • Ans. 

    A hydraulic circuit is a system that uses fluid to transmit power and control the movement of mechanical components.

    • A hydraulic circuit typically consists of a power source, such as a hydraulic pump, which generates fluid flow and pressure.

    • The fluid is then directed through various components, such as valves, cylinders, and motors, to perform specific tasks.

    • Valves control the flow and direction of the fluid, allowing i...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Hydraulic electrical
  • Q2. Engine . Basics

Interview Preparation Tips

Interview preparation tips for other job seekers - Senior service engineer
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all Resume tips
Round 2 - Group Discussion 

Technical knowledge and troubleshooting discussion

Round 3 - Technical 

(3 Questions)

  • Q1. Hydraulic symbols, hydraulic circuit drow
  • Q2. How to work hydraulic system
  • Ans. 

    A hydraulic system uses fluid to transmit power and control movement in machinery.

    • Hydraulic systems use a pump to pressurize fluid, typically oil or water.

    • The pressurized fluid is then used to generate force and control the movement of various components.

    • Components of a hydraulic system include pumps, actuators, valves, and fluid reservoirs.

    • Proper maintenance and regular inspection are essential to ensure the system's ...

  • Answered by AI
  • Q3. How to attend troubleshooting
  • Ans. 

    To attend troubleshooting, follow a systematic approach by identifying the problem, gathering information, analyzing data, and implementing solutions.

    • Identify the problem by gathering information from the user or observing the issue

    • Ask relevant questions to understand the symptoms and potential causes

    • Analyze available data, logs, and system configurations to narrow down the problem

    • Use diagnostic tools and techniques to...

  • Answered by AI
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Not remember Tell about yourself, Why leaving there
Round 3 - Technical 

(1 Question)

  • Q1. Not remember Safety Quality Improvement
Contribute & help others!
anonymous
You can choose to be anonymous

Liebherr Interview FAQs

How to prepare for Liebherr Senior Service Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Liebherr. The most common topics and skills that interviewers at Liebherr expect are Hydraulics, Dozer, Earth Moving, Electricals and Heavy Equipment.
What are the top questions asked in Liebherr Senior Service Engineer interview?

Some of the top questions asked at the Liebherr Senior Service Engineer interview -

  1. Variable axial piston pump how wo...read more
  2. Engine related troubleshoot...read more
  3. Basic electric...read more

Recently Viewed

LIST OF COMPANIES

Comviva Technology

Locations

JOBS

Comviva Technology

No Jobs

DESIGNATION

INTERVIEWS

Amazon

No Interviews

INTERVIEWS

Liebherr

No Interviews

LIST OF COMPANIES

embedUR Systems

Locations

INTERVIEWS

BYJU'S

No Interviews

INTERVIEWS

Dabur

No Interviews

JOBS

Comviva Technology

No Jobs

INTERVIEWS

VARDHAN CONSULTING ENGINEERS

No Interviews

Tell us how to improve this page.

Interview Questions from Similar Companies

Caterpillar Inc Interview Questions
4.2
 • 176 Interviews
JCB Interview Questions
4.0
 • 126 Interviews
Volvo Interview Questions
4.1
 • 63 Interviews
Toshiba Interview Questions
4.0
 • 27 Interviews
Sulzer Interview Questions
3.9
 • 27 Interviews
Buhler Interview Questions
3.9
 • 26 Interviews
Kennametal Interview Questions
3.6
 • 24 Interviews
Konecranes Interview Questions
4.0
 • 21 Interviews
View all
Liebherr Senior Service Engineer Salary
based on 31 salaries
₹6.5 L/yr - ₹12.6 L/yr
47% more than the average Senior Service Engineer Salary in India
View more details

Liebherr Senior Service Engineer Reviews and Ratings

based on 9 reviews

3.7/5

Rating in categories

3.8

Skill development

3.2

Work-life balance

3.7

Salary

3.7

Job security

4.0

Company culture

3.4

Promotions

2.8

Work satisfaction

Explore 9 Reviews and Ratings
Service Engineer
109 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Service Engineer
31 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Warehouse Executive
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Liebherr with

Caterpillar Inc

4.2
Compare

Komatsu

3.9
Compare

Volvo

4.1
Compare

Terex

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview