Filter interviews by
I applied via Referral and was interviewed before May 2020. There were 3 interview rounds.
Top trending discussions
I applied via Job Fair and was interviewed in Nov 2024. There was 1 interview round.
The number of shuttering materials used for shuttering varies depending on the size and complexity of the project.
The quantity of shuttering material needed is determined by the size and design of the structure being built.
Common types of shuttering materials include plywood, steel, timber, and aluminum.
Calculations are typically done by engineers or supervisors to determine the exact amount of shuttering material requ
Safety on a work site refers to the measures and protocols in place to prevent accidents and injuries among employees.
Ensuring all employees are properly trained on safety procedures
Regularly inspecting equipment and machinery for any potential hazards
Providing necessary personal protective equipment (PPE) to employees
Implementing emergency response plans in case of accidents or incidents
Promoting a culture of safety a
I applied via Walk-in and was interviewed in Jun 2023. There were 2 interview rounds.
I applied via Walk-in and was interviewed in Nov 2022. There were 2 interview rounds.
I applied via Walk-in and was interviewed in Mar 2023. There were 2 interview rounds.
The 7qc tools are a set of problem-solving techniques used in quality control and management.
The tools include: Pareto chart, cause-and-effect diagram, flowchart, check sheet, histogram, scatter diagram, and control chart.
These tools help identify and analyze problems, determine root causes, and develop solutions.
For example, a Pareto chart can be used to identify the most common causes of defects, while a control char...
5 core tools are essential for any supervisor to manage their team effectively.
Communication tools like email, phone, and messaging apps
Project management tools like Trello, Asana, or Jira
Time management tools like calendars and scheduling apps
Performance tracking tools like performance reviews and goal setting
Collaboration tools like Google Drive, Dropbox, or Microsoft Teams
An automobile is a motor vehicle with four wheels, designed for transportation on roads.
Automobiles are commonly used for personal transportation, but can also be used for commercial purposes.
They typically run on gasoline or diesel fuel, but electric and hybrid models are becoming more popular.
Examples of automobiles include cars, trucks, vans, and SUVs.
They are regulated by various laws and safety standards to ensure
Thermal insulation is necessary for proper function and basic protection.
Thermal insulation helps regulate temperature and prevent heat loss or gain.
Common types of insulation include fiberglass, foam, and cellulose.
Insulation is used in buildings, vehicles, and various industrial applications.
Examples of insulation materials include fiberglass batts, spray foam, and mineral wool.
Proper insulation improves energy effic
ECC stands for Error Correction Code, which is a method used to detect and correct errors in data transmission.
ECC is commonly used in computer memory and storage devices to ensure data integrity.
It works by adding extra bits to the data being transmitted, which can be used to detect and correct errors.
There are different types of ECC, such as Single Error Correction Double Error Detection (SECDED) and Triple Error Cor
Type B MCBs are suitable for halogen lamps.
Type B MCBs have a characteristic curve that allows for a short-term surge in current, which is common in halogen lamps.
Type C and D MCBs may trip too quickly and cause nuisance tripping.
It is important to check the wattage and voltage of the halogen lamp to ensure the correct MCB is selected.
Examples of Type B MCBs include Schneider Electric Acti 9 iK60N and ABB S 200 series.
What is the square root of 0.017?
A dead short wiring installation will have a megger reading of zero.
A dead short is a complete circuit with no resistance.
A megger is used to measure insulation resistance.
In a dead short, there is no insulation resistance to measure.
Therefore, the megger reading will be zero.
posted on 30 Nov 2023
I applied via Referral and was interviewed before Nov 2022. There were 2 interview rounds.
Voltage calculation involves determining the potential difference between two points in an electrical circuit.
Voltage is measured in volts (V).
The formula to calculate voltage is V = IR, where V is voltage, I is current, and R is resistance.
Voltage can also be calculated using Ohm's Law: V = I x R.
Voltage can be determined using a voltmeter or by measuring the potential difference across a component.
Voltage calculation...
I applied via Job Fair and was interviewed in Feb 2022. There was 1 interview round.
Electricity is the flow of electric charge, while resistance is the measure of opposition to the flow of electric current.
Electricity is the movement of electrons through a conductor.
Resistance is the property of a material that hinders the flow of electric current.
Resistance is measured in ohms (Ω).
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied and inverse...
A wark is a type of work or labor, while a transformer is an electrical device that transfers energy between circuits.
Wark refers to physical or mental effort put into a task or job.
A transformer is a device that changes the voltage of an alternating current.
Transformers are commonly used in electrical power distribution systems.
They can step up or step down the voltage depending on the application.
For example, a step-...
I applied via Company Website and was interviewed before Apr 2021. There were 2 interview rounds.
HTML stands for Hyper Text Markup Language, used to create web pages and applications.
HTML is a markup language used to structure content on the web.
It uses tags to define elements such as headings, paragraphs, and links.
HTML can be combined with CSS and JavaScript to create interactive web pages.
Some common HTML tags include ,
, ,, , and .
RTGS stands for Real Time Gross Settlement, a system for transferring funds between banks in real-time.
RTGS is used for high-value transactions that require immediate clearing and settlement.
It is a secure and reliable system that ensures timely and efficient transfer of funds.
RTGS is commonly used for interbank transfers, large corporate payments, and government transactions.
The system operates on a 24x7 basis, allowi...
based on 6 reviews
Rating in categories
Supervisor
7
salaries
| ₹2.5 L/yr - ₹6 L/yr |
Investigator
5
salaries
| ₹2.9 L/yr - ₹3 L/yr |
Junior Consultant
3
salaries
| ₹4 L/yr - ₹4.8 L/yr |
Data Entry Operator
3
salaries
| ₹2.9 L/yr - ₹3 L/yr |
Young Professional
3
salaries
| ₹6 L/yr - ₹8.4 L/yr |
National Sample Survey Office (nsso)
Centre For Monitoring Indian Economy
Indian Statistical Institute
Ministry of Labour & Employment