Add office photos
Filter interviews by
Kunamneni Technologies Junior Engineer Interview Questions, Process, and Tips
Kunamneni Technologies Junior Engineer Interview Experiences
1 interview found
Selected
I applied via Job Portal and was interviewed before Feb 2022. There were 3 interview rounds.
(3 Questions)
- Q1. What is an pv array
- Ans.
A PV array is a collection of photovoltaic modules that generate electricity from sunlight.
PV arrays are commonly used in solar power systems to generate electricity.
They are made up of multiple PV modules connected together in series or parallel.
The size of a PV array depends on the amount of electricity needed and the available space for installation.
PV arrays can be mounted on rooftops, on the ground, or on tracking...
- Q2. What is vaccum circuit Breaker
- Ans.
A vacuum circuit breaker is an electrical switch that uses a vacuum to extinguish the arc when the circuit is broken.
It is used in high voltage applications
It is more efficient and reliable than other types of circuit breakers
It has a longer lifespan and requires less maintenance
Examples include Siemens 3AH vacuum circuit breaker and ABB VD4 vacuum circuit breaker
- Q3. What is the realy response time
- Ans.
Real response time refers to the time taken for a system to respond to a given input or event.
Real response time is a measure of system performance.
It is usually measured in milliseconds or microseconds.
Factors that affect response time include network latency, processing speed, and system load.
For example, a website with a low response time will load quickly and provide a better user experience.
Real response time is d...
(2 Questions)
- Q1. What is Inverter duty TRANSFROMER
- Ans.
Inverter duty transformer is designed to handle the high voltage spikes and harmonics generated by inverters.
Used in applications where inverters are used to convert DC to AC power
Can handle high voltage spikes and harmonics generated by inverters
Designed with special insulation and cooling systems to withstand the stress of inverter operation
Examples include solar power systems, wind turbines, and variable speed drive
- Q2. What is maximum power point tracking
- Ans.
Maximum power point tracking is a technique used to optimize the output power of a solar panel.
It involves finding the point on the current-voltage curve of a solar panel where the output power is maximum.
This is done by adjusting the load resistance of the panel to match the impedance of the solar cells.
MPPT is important for maximizing the efficiency of solar panels and increasing the amount of power that can be gener...
Interview Preparation Tips
Depends on your technical knowledge
Top trending discussions
Interview questions from similar companies
Selected
I applied via AmbitionBox and was interviewed in Jan 2024. There were 4 interview rounds.
An aptitude test is an exam used to determine an individual's skill or propensity to succeed in a given activity. Aptitude tests assume that individuals have inherent strengths and weaknesses and have a natural inclination toward success or failure in specific areas based on their innate characteristics.
Coding tests are typically programming challenges that help technical recruiters test programming skills and competencies of a developer or programmer. A good coding test will measure a candidate's capacity for problem-solving skills and understanding of coding.
(2 Questions)
- Q1. Why should we hire you? ..
- Q2. What are your weaknesses?
(1 Question)
- Q1. Why did you decide to apply to this role? What experience do you have that would be relevant to this role? Tell me about your experience in … What did you like most about the job description? Why are you l...
anshul sharma
Selected
I applied via Referral and was interviewed in Sep 2023. There was 1 interview round.
(2 Questions)
- Q1. What is dwdm otn
- Ans.
DWDM OTN stands for Dense Wavelength Division Multiplexing Optical Transport Network.
DWDM OTN is a technology that combines DWDM (Dense Wavelength Division Multiplexing) with OTN (Optical Transport Network) for high-capacity optical communication.
It allows multiple signals to be transmitted simultaneously over a single fiber optic cable by using different wavelengths of light.
DWDM OTN is commonly used in long-haul tele...
- Q2. Basic troubleshooting
Skills evaluated in this interview
I applied via Approached by Company and was interviewed in Feb 2022. There were 2 interview rounds.
They asked about difference between college life and corporate life and the projects we carried out in engineering
(1 Question)
- Q1. Asked some engineering subjects
- Ans. We have to tell subjects of academics
Interview Preparation Tips
- Engineering
- Communication Skills
(2 Questions)
- Q1. Question about Networking, OFC
- Q2. Types of communication channel
- Ans.
Communication channels refer to the ways in which information is transmitted between individuals or groups.
Types include verbal (face-to-face, phone calls), written (emails, letters), non-verbal (body language, gestures), and visual (charts, graphs)
Other channels include electronic (social media, video conferencing), formal (meetings, presentations), and informal (casual conversations)
Choosing the right channel depends...
Interview Preparation Tips
Selected
I applied via AmbitionBox and was interviewed in Jan 2024. There were 4 interview rounds.
An aptitude test is an exam used to determine an individual's skill or propensity to succeed in a given activity. Aptitude tests assume that individuals have inherent strengths and weaknesses and have a natural inclination toward success or failure in specific areas based on their innate characteristics.
Coding tests are typically programming challenges that help technical recruiters test programming skills and competencies of a developer or programmer. A good coding test will measure a candidate's capacity for problem-solving skills and understanding of coding.
(2 Questions)
- Q1. Why should we hire you? ..
- Q2. What are your weaknesses?
(1 Question)
- Q1. Why did you decide to apply to this role? What experience do you have that would be relevant to this role? Tell me about your experience in … What did you like most about the job description? Why are you l...
Selected
I applied via Referral and was interviewed in Sep 2023. There was 1 interview round.
(2 Questions)
- Q1. What is dwdm otn
- Ans.
DWDM OTN stands for Dense Wavelength Division Multiplexing Optical Transport Network.
DWDM OTN is a technology that combines DWDM (Dense Wavelength Division Multiplexing) with OTN (Optical Transport Network) for high-capacity optical communication.
It allows multiple signals to be transmitted simultaneously over a single fiber optic cable by using different wavelengths of light.
DWDM OTN is commonly used in long-haul tele...
- Q2. Basic troubleshooting
Skills evaluated in this interview
I applied via Approached by Company and was interviewed in Feb 2022. There were 2 interview rounds.
They asked about difference between college life and corporate life and the projects we carried out in engineering
(1 Question)
- Q1. Asked some engineering subjects
- Ans. We have to tell subjects of academics
Interview Preparation Tips
- Engineering
- Communication Skills
Junior Executive Interview Questions & Answers
Tata Communications Transformation Services
Anonymous
posted on 7 Sep 2021
I applied via Referral and was interviewed before Sep 2020. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. What is GIS ?
- Ans.
GIS stands for Geographic Information System. It is a system designed to capture, store, manipulate, analyze, manage, and present spatial or geographic data.
GIS is used in various fields such as urban planning, environmental management, and emergency response.
It allows users to visualize, analyze, and interpret data in a spatial context.
GIS can be used to create maps, perform spatial analysis, and manage data.
Examples ...
- Q2. What do you know about networking?
- Ans.
Networking refers to the practice of connecting devices and systems to share information and resources.
Networking involves the use of protocols and technologies such as TCP/IP, DNS, and DHCP.
Networking can be done through wired or wireless connections.
Networking allows for the sharing of resources such as printers, files, and internet connections.
Networking can be used for communication between devices and systems, suc...
- Q3. What is coaxial cable , what are the types of cable
- Ans.
Coaxial cable is a type of cable that is used to transmit audio, video, and data signals.
It consists of a central conductor, an insulating layer, a metallic shield, and an outer insulating layer.
The two main types of coaxial cable are thinnet (RG-58) and thicknet (RG-8).
Coaxial cable is commonly used in cable television, internet, and telephone systems.
It provides better shielding and less signal loss than other types ...
- Q4. What is NAP ??????
- Ans.
NAP stands for Name, Address, and Phone Number. It is a crucial piece of information for local businesses to be found online.
NAP is important for local SEO as search engines use this information to verify the legitimacy of a business.
Consistency in NAP across all online platforms is crucial for better search engine rankings.
NAP can also be used by customers to find and contact a business.
Example: John's Pizza has consi...
Interview Preparation Tips
Skills evaluated in this interview
Junior Engineer Electrical Interview Questions & Answers
Bharat Sanchar Nigam
Anonymous
posted on 24 Mar 2022
I applied via LinkedIn and was interviewed before Mar 2021. There was 1 interview round.
(1 Question)
- Q1. Tell me about yourself
Interview Preparation Tips
Kunamneni Technologies Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Junior Engineer Electrical Interview Questions
- Junior Mechanical Engineer Interview Questions
- Junior Engineer Production Interview Questions
- Junior Engineer Trainee Interview Questions
- Junior Quality Engineer Interview Questions
- Junior Technician Interview Questions
- Junior Engineer - Quality Assurance Interview Questions
- Junior Software Developer Interview Questions
- Show more
Kunamneni Technologies Junior Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Kunamneni Technologies Junior Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Electrical Site Engineer
15
salaries
|  ₹2 L/yr - ₹2.8 L/yr |
|
Site Engineer
11
salaries
| ₹2.5 L/yr - ₹4 L/yr |
|
Engineer
7
salaries
| ₹2 L/yr - ₹2.3 L/yr |
|
Electrical Engineer
7
salaries
| ₹2.2 L/yr - ₹4.8 L/yr |
|
Junior Engineer
7
salaries
| ₹1.4 L/yr - ₹3.5 L/yr |
Vodafone Idea
Bharti Airtel
Ericsson
Reliance Communications
- Home >
- Interviews >
- Kunamneni Technologies Interview Questions >
- Kunamneni Technologies Junior Engineer Interview Questions
