Filter interviews by
I applied via Job Fair and was interviewed in May 2024. There was 1 interview round.
Bolls going refers to the process of cotton bolls opening up to reveal the cotton fibers inside.
Bolls going is a term used in the cotton industry to describe the stage when cotton bolls start to open up and reveal the cotton fibers inside.
This process is crucial for harvesting cotton as it allows for the fibers to be easily collected and processed.
Example: During the bolls going stage, farmers closely monitor the cotto...
ABS brakes are a safety feature in vehicles that prevent wheels from locking up during braking, improving control and reducing stopping distances.
ABS stands for Anti-lock Braking System
Helps prevent skidding and loss of control during emergency stops
Works by modulating brake pressure to individual wheels
Commonly found in modern vehicles for improved safety
Top trending discussions
I applied via Referral and was interviewed before Feb 2021. There was 1 interview round.
Line balancing is the process of optimizing workstations in a production line to minimize idle time and maximize efficiency.
It involves analyzing the production process and identifying bottlenecks
Tasks are then rearranged to balance the workload across workstations
The goal is to achieve a smooth and continuous flow of work
Example: In a car assembly line, line balancing would involve ensuring that each workstation has a...
I applied via Naukri.com and was interviewed in Sep 2023. There was 1 interview round.
The number of sensors in a bike varies depending on the make and model, but typically includes sensors for speed, temperature, and fuel levels.
Number of sensors in a bike can range from 5 to 30 depending on the complexity of the bike.
Common sensors in a bike include speed sensors, temperature sensors, fuel level sensors, and tire pressure sensors.
Some high-end bikes may also have sensors for lean angle, suspension trav...
TPS sensor stands for Throttle Position Sensor, which monitors the position of the throttle valve.
TPS sensor is a crucial component in the engine management system.
It helps in determining the amount of air entering the engine.
The sensor sends this information to the engine control unit (ECU) to adjust fuel injection and ignition timing.
A faulty TPS sensor can cause issues like poor acceleration, stalling, or rough idli...
The HT coil, also known as the high tension coil, is an essential component in the ignition system of a vehicle, responsible for generating high voltage to create a spark in the spark plugs.
HT coil is a type of ignition coil used in vehicles to produce high voltage for the spark plugs
It is typically located near the engine and connected to the distributor or ignition module
A faulty HT coil can result in misfiring, roug
An h2 sensor is a hydrogen sensor used to detect the presence of hydrogen gas in a given environment.
H2 sensors are commonly used in industrial settings to monitor for leaks in hydrogen gas pipelines.
They are also used in fuel cell vehicles to ensure safe operation.
The sensor typically works by detecting changes in electrical conductivity when exposed to hydrogen gas.
CDI (Capacitor Discharge Ignition) and RR (Rectifier Regulator) units work together to regulate the electrical system in a motorcycle.
CDI unit stores energy from the stator and releases it to the ignition coil to create a spark for combustion.
RR unit regulates the voltage produced by the stator to prevent overcharging of the battery.
CDI and RR units work in tandem to ensure proper ignition timing and electrical system ...
I applied via Approached by Company and was interviewed before Oct 2021. There was 1 interview round.
The backbone of an engine is the engine block.
The engine block is the main structural component of an engine.
It houses the cylinders, crankshaft, and other important components.
It also provides support for the engine's other systems, such as the cooling and lubrication systems.
The material used for the engine block can vary depending on the type of engine and its intended use.
For example, aluminum is often used for hig...
I live in New York City and belong to the United States.
I reside in the bustling city of New York, known for its iconic landmarks and diverse culture.
I am a citizen of the United States, born and raised in this great country.
New York City is my home, where I work and enjoy all the city has to offer.
I have a small family with four members.
I have two parents and one younger sibling.
We are a close-knit family and enjoy spending time together.
We often go on vacations and celebrate special occasions together.
I am grateful for my family's love and support.
I come from a close-knit family of five, including my parents, my younger sister, and my grandmother.
My parents have been married for over 30 years and are both retired teachers.
My younger sister is currently studying to become a nurse.
My grandmother lives with us and is the matriarch of our family.
We enjoy spending time together, whether it's cooking dinner, playing board games, or going on family vacations.
Family is ...
My family members have different occupations ranging from business to government jobs.
My father is a businessman and owns a small grocery store.
My mother is a government employee and works as a teacher in a local school.
My elder brother is a software engineer and works for a multinational company.
My younger sister is still studying and wants to become a doctor.
We have a few relatives who are doctors, lawyers, and engin
I applied via Approached by Company and was interviewed in Feb 2023. There were 2 interview rounds.
I applied via Referral and was interviewed before Sep 2023. There were 2 interview rounds.
Question related to NPD
Casting is the process of pouring molten metal into a mold to create a specific shape.
Casting involves creating a mold, melting the metal, pouring the metal into the mold, and allowing it to cool and solidify.
Different types of casting methods include sand casting, investment casting, die casting, and continuous casting.
Casting is used in various industries such as automotive, aerospace, and jewelry making.
I applied via Referral and was interviewed in Jul 2021. There was 1 interview round.
I applied via Naukri.com and was interviewed in Oct 2022. There were 3 interview rounds.
Maths(percentage, profit and loss)
Reasoning (average coding deciding blood relation)
I applied via Referral and was interviewed in Jan 2024. There were 2 interview rounds.
Logical aptitude test
SAP is a software used by companies for managing business operations and customer relations. Tcode is a transaction code used to access specific functions in SAP.
SAP stands for Systems, Applications, and Products in Data Processing.
It is a software used by companies for various business operations like finance, HR, sales, etc.
Tcode is a transaction code used to access specific functions in SAP, like creating a purchase
I applied via Recruitment Consultant and was interviewed in Jul 2021. There was 1 interview round.
To convince a customer for a product, I would highlight its unique features, demonstrate its benefits, provide testimonials, and offer a trial or discount.
Highlight the unique features of the product
Demonstrate the benefits it offers
Provide testimonials from satisfied customers
Offer a trial or discount to encourage the customer to try the product
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
Sales Executive
30
salaries
| ₹0 L/yr - ₹0 L/yr |
Showroom Manager
12
salaries
| ₹0 L/yr - ₹0 L/yr |
Area Sales Manager
9
salaries
| ₹0 L/yr - ₹0 L/yr |
Sales Manager
9
salaries
| ₹0 L/yr - ₹0 L/yr |
Service Advisor
8
salaries
| ₹0 L/yr - ₹0 L/yr |
Bajaj Auto
TVS Motor
Hero MotoCorp
Royal Enfield