Kcc Buildcon Bridge Design Engineer Interview Questions and Answers

Cube mould size is a standard size used for testing the compressive strength of concrete.

• Cube moulds are typically made of steel or cast iron.

• The standard size for cube moulds is 150mm x 150mm x 150mm.

• Other sizes such as 100mm x 100mm x 100mm and 200mm x 200mm x 200mm are also used.

• The moulds are filled with concrete and left to cure before being tested for compressive strength.

• Cube moulds are used to ensure that the c...read more

To calculate the weight of an 8mm diameter steel rod, use the formula: weight = volume x density.

• Calculate the volume of the rod using the formula: volume = π x (diameter/2)^2 x length

• Find the density of steel, which is typically around 7850 kg/m^3

• Multiply the volume by the density to get the weight of the rod

Grade M25 is a mix of concrete with a compressive strength of 25 megapascals after 28 days.

• M25 is a standard mix of concrete used in construction.

• It is made up of 1 part cement, 1 part sand, and 2 parts coarse aggregate.

• It has a compressive strength of 25 MPa after 28 days of curing.

• It is commonly used in the construction of buildings, bridges, and other structures.

• M25 is suitable for moderate exposure conditions and c

Leveling is the process of determining the height or elevation of a point or surface relative to a reference point.

• Leveling is commonly used in civil engineering and construction to ensure accurate measurements and proper alignment.

• It involves the use of leveling instruments such as a level, theodolite, or laser level.

• The process typically includes setting up benchmarks or reference points, taking readings at different...read more

The diameter of six mm refers to the size or measurement of a circular object that is six millimeters in width.

• The diameter is the distance across the center of a circle, passing through the circumference.

• A six mm diameter can be visualized as a circle with a width of six millimeters.

• It is a common measurement used in various industries, including engineering and manufacturing.

• For example, a six mm diameter steel rod w...read more

LEP stands for Load Equivalent Factor for Pavement design.

• LEP is used in pavement design to determine the load-carrying capacity of the pavement.

• The formula for LEP depends on the specific design method being used.

• For example, in the AASHTO design method, LEP is calculated using the formula: LEP = (ESAL/1000) * (1 + 0.003 * (T - 3))

• Here, ESAL is the Equivalent Single Axle Load and T is the pavement design period in yea...read more