Katerra QC Inspector Interview Questions and Answers

Q1. HR calls after finding the suitable candidate and ask them to share their updated resume with other credentials such as education certificate and experience certificate etc.
Add your answer
Q2. General introduction
Add your answer

Q1. After HR arrange for the technical interview and panel of 3 people take interview which comprises of HR and technical persons such as Quality DGM and M4 level person.
Add your answer
Q2. 1.Optimization of Cement means ? 2. Concrete design miix as per CBC 3 Batching plant and calibration 4. Soil testing etc
Ans. 
Optimization of cement refers to improving the quality and efficiency of cement production.
• Reducing the amount of clinker used in cement production

• Using alternative fuels and raw materials

• Improving the grinding process

• Controlling the chemical composition of raw materials

• Minimizing energy consumption

• Maximizing output while maintaining quality

• Ensuring compliance with industry standards and regulations
Answered by AI
Add your answer
Q3. What's are the checks in Site Inspection for RCC work of Bridge culvert and major bridges
Ans. 
Checks in Site Inspection for RCC work of Bridge culvert and major bridges
• Check for proper reinforcement placement and spacing

• Check for proper concrete mix and slump

• Check for proper curing of concrete

• Check for proper alignment and level of formwork

• Check for proper placement and compaction of concrete

• Check for proper finishing of concrete surface

• Check for cracks and defects in concrete

• Check for proper drainage system

• Che
Answered by AI
Add your answer

Part-1 consist of General aptitude & Part-2 consist of Technical question related to Civil Engineering

Q1. Purely technical no other questions other than technical question relevant to the post we are applying
Add your answer

Q1. Salary Expectations & other stuffs
Add your answer

Online exam selection process

Q1. Head of the department has taken interview
Add your answer
Q2. Related to mix design, Quality cum execution question, QMS, PQR, ITP MIR
Add your answer

Q1. What is quality assurance
Ans. 
Quality assurance is the process of ensuring that products or services meet specified requirements and standards.
• Quality assurance involves creating and implementing processes and procedures to prevent defects or errors in products or services.

• It includes activities such as planning, designing, testing, and monitoring to ensure that quality standards are met.

• Quality assurance aims to improve customer satisfaction by de...read more
Answered by AI
View 1 more answer
Q2. Proactive process to implement the activities
Ans. 
A proactive process to implement activities involves identifying potential issues, taking preventive measures, and continuously improving the quality of work.
• Identify potential risks and issues before they occur

• Develop and implement preventive measures

• Regularly review and update processes and procedures

• Encourage open communication and collaboration within the team

• Provide training and support to ensure everyone understa...read more
Answered by AI
Add your answer

Q1. Salary negotiable
Add your answer
Q2. Very prompt and giving good expectations
Add your answer
Q3. Experience letter, payslip
Add your answer
Q4. Bank statement and experience letters
Add your answer

Q1. About all the parameters in quality engineering
Add your answer
Q2. We need to explain all documents and procedures
Add your answer

Q1. What is pwht ?
Ans. 
PWHT stands for Post Weld Heat Treatment, a process used to reduce residual stresses and improve the mechanical properties of welded joints.
• PWHT involves heating the welded component to a specific temperature for a certain period of time, followed by controlled cooling.

• The process helps to eliminate hydrogen cracking, improve toughness, and reduce distortion in the welded joint.

• Common methods of PWHT include furnace he...read more
Answered by AI
Add your answer
Q2. What is wqt range ?
Ans. 
WQT range refers to the range of values for Water Quality Testing in a specific context.
• WQT range can vary depending on the parameters being tested, such as pH, turbidity, dissolved oxygen, etc.

• For example, the WQT range for pH in drinking water may be 6.5-8.5.

• Monitoring and maintaining WQT range is crucial for ensuring safe and clean water supply.

• Regular testing and analysis of water samples help in determining if the
Answered by AI
Add your answer
Q3. Acceptance criteria of LPT
Ans. 
LPT acceptance criteria ensure that the test results meet specified requirements.
• Test results must meet specified requirements outlined in the acceptance criteria

• Acceptance criteria should be clearly defined and documented

• Criteria may include specific performance metrics or thresholds

• Examples: minimum tensile strength, maximum elongation percentage
Answered by AI
Add your answer

Q1. Es per is code 2386 patr3 (1963)
View 2 more answers
Q2. Concreet workwiltey testing process??
Ans. 
The concrete workability testing process involves evaluating the ease of placing, compacting, and finishing concrete.
• Conduct slump test to measure the consistency of fresh concrete.

• Perform flow table test to determine the flowability of self-compacting concrete.

• Use the Vebe test to assess the workability of concrete with vibration.

• Conduct compaction factor test to measure the workability of heavily reinforced concrete.

• ...read more
Answered by AI
View 4 more answers
Q3. 100 m3 mai kitana mold bharna hai
View 2 more answers

Q1. How it is not achieved the concrete slump value, you should have rectified this situation
Add your answer
Q2. If concrete workability not in limit use this Concrete
Add your answer
Q3. Required concrete aggregate crushing value
Ans. 
The required concrete aggregate crushing value is determined by testing the strength of the aggregate.
• The crushing value should not exceed a certain limit to ensure the quality of the concrete.

• It is typically measured using a compression testing machine.

• The standard limit for aggregate crushing value is usually around 30-45% for concrete used in construction.
Answered by AI
Add your answer
Q4. You have conducted highest grade of of concrete
Ans. 
Yes, I have conducted the highest grade of concrete in various construction projects.
• I have experience working with Grade 60 and Grade 80 concrete mixes.

• I have overseen the testing and quality control of Grade 100 concrete for a high-rise building project.

• I have ensured that the concrete mix design met the required specifications and standards for strength and durability.
Answered by AI
Add your answer

Q1. How much your salary accepted
Ans. 
I am open to discussing salary based on the responsibilities and requirements of the position.
• Salary expectations are based on industry standards and the specific job responsibilities.

• I am flexible and open to negotiation based on the overall compensation package.

• I am more focused on finding the right fit for my skills and experience rather than a specific salary number.
Answered by AI
Add your answer
Q2. Why do leave the privious company
Add your answer

Q1. Required document if leave proprius com.
Add your answer
Q2. Present your salary accepted
Add your answer