i
JSW Steel
Filter interviews by
I studied at XYZ Technical College, where I specialized in mechanical engineering.
Studied at XYZ Technical College
Specialized in mechanical engineering
Completed hands-on training in various mechanical systems
I studied at XYZ Technical College, where I gained hands-on experience in mechanical engineering.
Studied at XYZ Technical College
Hands-on experience in mechanical engineering
Specialized in courses related to mechanical technology
Participated in practical workshops and projects
I applied via Walk-in and was interviewed before Jun 2022. There were 2 interview rounds.
HEMM stands for Heavy Earth Moving Machinery. It includes equipment like bulldozers, excavators, dump trucks, etc.
HEMM is used in construction, mining, and other heavy industries.
These machines are designed to move large quantities of earth, rocks, and other materials.
Examples of HEMM include bulldozers, excavators, dump trucks, and cranes.
Regular maintenance and proper operation are essential for the safe and efficien
Diesel engines are internal combustion engines that use compression ignition to ignite the fuel mixture.
Diesel engines are more fuel efficient than gasoline engines.
They are commonly used in heavy-duty vehicles like trucks, buses, and construction equipment.
Diesel engines produce more torque at lower RPMs compared to gasoline engines.
They require less maintenance due to their simpler design and lack of spark plugs.
Dies...
Knowing the type of maintenance is crucial for ensuring equipment reliability and efficiency.
There are three main types of maintenance: preventive, predictive, and corrective.
Preventive maintenance involves regularly scheduled inspections and tasks to prevent breakdowns.
Predictive maintenance uses data and analytics to predict when maintenance is needed.
Corrective maintenance is performed after a breakdown has occurred...
I applied via Recruitment Consultant
There are three types of alignment: shaft alignment, belt alignment, and gear alignment.
Shaft alignment involves aligning the rotating shafts of machines to ensure smooth operation and prevent damage.
Belt alignment refers to aligning the belts in machines such as conveyor systems to prevent slipping and maximize efficiency.
Gear alignment involves aligning the gears in machines to ensure proper meshing and smooth transm
The number of gearbox motor and compressor alignments varies depending on the specific machinery and requirements.
The number of gearbox motor and compressor alignments can range from one to multiple, depending on the number of machines and their configurations.
Each gearbox motor and compressor alignment requires careful measurement and adjustment to ensure proper alignment and efficient operation.
Examples of alignments...
What people are saying about JSW Steel
A hydraulic system uses fluid to transmit power and consists of components like pumps, cylinders, valves, and hoses.
Hydraulic pump: generates flow to the hydraulic system
Hydraulic cylinder: converts fluid power into mechanical power
Hydraulic valve: controls the flow and pressure of the fluid
Hydraulic hose: carries the fluid between components
Steel making process involves converting iron ore into steel through various stages like smelting, refining, and casting.
Iron ore is mined and transported to a steel mill.
The iron ore is smelted in a blast furnace to remove impurities and create molten iron.
The molten iron is then refined in a basic oxygen furnace or an electric arc furnace to adjust the carbon content and other alloying elements.
The refined molten iro...
I applied via Naukri.com and was interviewed in Apr 2021. There were 3 interview rounds.
I applied via Referral and was interviewed in Jul 2021. There was 1 interview round.
posted on 7 Jul 2017
I appeared for an interview in Jul 2017.
I appeared for an interview in Sep 2017.
I appeared for an interview in Jun 2017.
The percentage of carbon presence in cast iron varies from 2.1% to 6.67% depending on the type of cast iron.
Cast iron is classified into four types based on its carbon content: white, gray, ductile, and malleable.
White cast iron has the highest carbon content, ranging from 2.1% to 6.67%.
Gray cast iron has a lower carbon content, ranging from 2.5% to 4%.
Ductile cast iron has a carbon content of 3.2% to 4.1%.
Malleable ca...
Addendum is the height of the tooth above the pitch circle in a gear.
Addendum is the distance between the pitch circle and the top of the gear tooth.
It is an important parameter in gear design as it affects the strength and durability of the gear.
The addendum can be calculated using the formula addendum = module or diametral pitch.
For example, in a gear with a module of 2mm, the addendum would be 2mm.
Addendum is the op...
The least count of vernier calipers is the smallest measurement that can be accurately read on the scale.
The least count is determined by the number of divisions on the main scale and the vernier scale.
It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.
For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 division
I work for a leading engineering firm specializing in designing and manufacturing industrial machinery.
We have a team of experienced mechanical engineers who work on various projects
Our company focuses on innovation and cutting-edge technology in our designs
We have successfully completed projects for clients in the automotive and aerospace industries
I come from a close-knit family with a strong emphasis on education and hard work.
My parents are both engineers, so I grew up with a passion for problem-solving and innovation.
I have two siblings, one of whom is also pursuing a career in engineering.
Family gatherings often involve discussions about new technologies and projects we are working on.
My family has always been supportive of my academic and career pursuits.
I am a passionate mechanical engineer with a strong background in designing and implementing innovative solutions.
Graduated with a degree in Mechanical Engineering from XYZ University
Completed internships at ABC Company and gained hands-on experience in CAD software
Led a team project to design and build a prototype for a new cooling system
Continuously learning and staying updated on the latest industry trends and techn
I am joining this company because of its reputation for innovation and commitment to employee growth.
Opportunity to work on cutting-edge projects
Strong focus on professional development
Positive company culture and values
Potential for career advancement
Desire to contribute to a successful team
I have a strong background in mechanical engineering with hands-on experience in designing and implementing innovative solutions.
Extensive knowledge in mechanical engineering principles and practices
Proven track record of successfully completing projects on time and within budget
Strong problem-solving skills and ability to think creatively
Experience in using CAD software for design and analysis
Excellent communication a...
posted on 3 Apr 2021
I applied via Walk-in and was interviewed in Mar 2021. There was 1 interview round.
based on 2 interviews
Interview experience
based on 17 reviews
Rating in categories
Assistant Manager
3.1k
salaries
| ₹3.6 L/yr - ₹12.9 L/yr |
Junior Engineer
2.2k
salaries
| ₹2 L/yr - ₹5.5 L/yr |
Deputy Manager
1.7k
salaries
| ₹5.6 L/yr - ₹20 L/yr |
Manager
1.1k
salaries
| ₹7 L/yr - ₹22.6 L/yr |
Senior Engineer
1.1k
salaries
| ₹3 L/yr - ₹10.5 L/yr |
Tata Steel
Jindal Stainless
Jindal Saw
JSW Group