Add office photos
Filter interviews by
JSC Interview Questions and Answers
JSC Interview Experiences
2 interviews found
Selected
I applied via Hirect and was interviewed before Oct 2023. There were 3 interview rounds.
General Aptitude like scrambled words, missing image,etc
(2 Questions)
- Q1. Excel formula how to sum the given numbers
- Ans.
Use the SUM function in Excel to add up a range of numbers.
Enter =SUM( in a cell
Select the range of numbers you want to sum
Close the bracket and press Enter
Example: =SUM(A1:A5) will sum the numbers in cells A1 to A5
- Q2. Then manager srinivasan will take interview.
(2 Questions)
- Q1. He will ask salary expectations
- Q2. He will ask background of yours.
Interview Preparation Tips
They really act like God.
Documentation Engineer Interview Questions asked at other Companies
I applied via campus placement at Nettur Technical Training Foundation (NTTF) and was interviewed in Apr 2022. There were 3 interview rounds.
Normal Electrical and electronic Question Not that hard
(3 Questions)
- Q1. In an interview, they will ask about basic electronics, and electrical.
- Q2. How does the rectifier work?
- Ans.
Rectifier converts AC to DC by allowing current to flow in one direction only.
Rectifier uses diodes to convert AC to DC.
Diodes allow current to flow in one direction only.
Half-wave rectifier uses only one diode while full-wave rectifier uses four diodes.
Bridge rectifier is a type of full-wave rectifier.
Rectifier is used in power supplies and electronic devices.
Examples of rectifiers include Selenium rectifier, Silicon
- Q3. Working of induction motor?
- Ans.
Induction motor works on the principle of electromagnetic induction to convert electrical energy into mechanical energy.
The stator of the motor has a set of windings that are supplied with AC current, creating a rotating magnetic field.
This rotating magnetic field induces a current in the rotor windings, which in turn creates a magnetic field that interacts with the stator field.
The interaction between the two fields c...
Interview Preparation Tips
- Electricals
- Electronics
Diploma Electrical Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
Selected
I applied via Recruitment Consulltant and was interviewed in Dec 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What is the use of ACL?
- Ans.
ACL stands for Access Control List, which is used to control access to resources by specifying which users or systems are allowed to access them.
ACLs are commonly used in computer networking to control access to files, directories, and network resources.
They can be configured to allow or deny specific types of traffic based on criteria such as source IP address, destination IP address, port number, etc.
ACLs can be appl...
- Q2. What is office 365 and use ?
- Ans.
Office 365 is a cloud-based subscription service offered by Microsoft that includes access to various productivity tools and applications.
Includes applications like Word, Excel, PowerPoint, Outlook, and OneNote
Allows users to access their files and collaborate with others from anywhere with an internet connection
Offers features like email hosting, file storage, and video conferencing
Provides regular updates and securit
(2 Questions)
- Q1. Introduce your-self?
- Ans.
Experienced retail professional with strong leadership skills and a passion for customer service.
Over 5 years of experience in retail management
Proven track record of increasing sales and improving customer satisfaction
Strong communication and team-building skills
Passionate about delivering exceptional customer service
Bachelor's degree in Business Administration
- Q2. How many years of experience do you have?
- Ans.
I have 5 years of experience in management roles, including 2 years as an Assistant Manager.
5 years of overall management experience
2 years specifically as an Assistant Manager
Experience in leading teams and overseeing daily operations
Implemented successful strategies to improve efficiency and productivity
Interview Preparation Tips
Be strong physically and mentally.
Senior Territory Sales Management Executive Interview Questions & Answers
Walplast Products
Anonymous
posted on 13 Jan 2025
(1 Question)
- Q1. The only way I could do that
(2 Questions)
- Q1. Very cool and very well executed
- Q2. Good luck to all
Interview Preparation Tips
Rajkishore Majhi
Selected
I applied via Company Website and was interviewed in Oct 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Which machine used?
- Ans.
Various machines are used in engineering, depending on the specific task at hand.
Milling machines are used for cutting and shaping solid materials.
Lathe machines are used for shaping metal or wood by rotating the workpiece against a cutting tool.
Drilling machines are used for creating holes in materials.
Grinding machines are used for finishing workpieces by removing excess material.
CNC machines are computer-controlled
- Q2. What part manufacturers?
- Ans.
Part manufacturers are companies that produce components or parts used in various products.
Part manufacturers specialize in producing specific components or parts.
They often work with engineers to design and create custom parts.
Examples include companies that manufacture screws, gears, circuit boards, etc.
(2 Questions)
- Q1. Semiauto or robotic machine?
- Q2. Minimum and maximum tonnage machine how much?
- Ans.
The minimum and maximum tonnage of a machine depends on its type and purpose.
Minimum and maximum tonnage can vary greatly depending on the type of machine (e.g. hydraulic press, injection molding machine)
For example, a hydraulic press may have a minimum tonnage of 10 tons and a maximum tonnage of 500 tons
It is important to consider the intended use of the machine when determining the appropriate tonnage range
Selected
I applied via campus placement at Institute of Technology, Banaras Hindu University and was interviewed in Jul 2024. There were 3 interview rounds.
20 questions 40 minutes, 3 type of question easy, medium and hard each of 1, 3 and 5 points respectively, if you answer correct then you move above in difficulty else go down.
(2 Questions)
- Q1. 20 questions 40 minutes same pattern as apti. Questions mainly from power electronics, network theory, machines and analog electronics
- Q2. 2 coding question one easy, one medium. Doing 1 question only may work
(3 Questions)
- Q1. Picked question from my cv/ project. Complete analysis of boost converter, voltage at no load, saturation of inductor, parasitics etc and much more.
- Q2. Bjt as switch opams mosfet on off charecteristics etc, analog electronics.
- Q3. 2 easy coding problem of searching and sorting algos
- Ans.
Implementing binary search and bubble sort algorithms in Python
Binary search: Divide and conquer algorithm to find a target value in a sorted array
Bubble sort: Iteratively swap adjacent elements if they are in the wrong order
Example for binary search: def binary_search(arr, target):
Example for bubble sort: def bubble_sort(arr):
Interview Preparation Tips
- Power Electronics
- Analog Electronics
- Network analysis
- Coding
- Digital Electronics
Skills evaluated in this interview
Selected
I was interviewed in Aug 2024.
Over all experience was good
(4 Questions)
- Q1. Stress and strain
- Q2. Iron carbon diagram
- Ans.
Iron carbon diagram shows the phases of iron and carbon at different temperatures.
Iron carbon diagram is a graphical representation of the phases of iron and carbon at different temperatures.
It helps in understanding the microstructure of steel and cast iron.
The diagram shows the phases such as austenite, ferrite, cementite, and pearlite.
It is used in metallurgy to determine the properties of steel based on its composi
- Q3. Isometric to orthogonal representation
- Ans.
Isometric and orthogonal representations are two different ways to depict objects in engineering and design.
Isometric representation shows objects in a 3D perspective with all three dimensions equally foreshortened.
Orthogonal representation shows objects in a 2D format with each dimension shown separately and to scale.
Isometric drawings are often used in technical drawings to show a 3D view of an object, while orthogon...
- Q4. About metal and non metals
(2 Questions)
- Q1. Basic concept of design
- Q2. How can some one reduce the cost of the components
- Ans.
Reducing component costs can be achieved through various strategies such as bulk purchasing, negotiating with suppliers, and redesigning products.
Negotiate with suppliers for better pricing
Explore bulk purchasing options for discounts
Redesign products to use cheaper materials or components
Consider outsourcing production to lower-cost regions
Implement lean manufacturing practices to reduce waste and improve efficiency
(2 Questions)
- Q1. Basics different between torque and couple
- Q2. Some situational based questions
Skills evaluated in this interview
Business Development Manager Interview Questions & Answers
e-con Systems
Amir Khan
posted on 3 Dec 2024
I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.
(2 Questions)
- Q1. Self introduction
- Q2. They asked questions like electronic components and it's defination
Interview Preparation Tips
Technical Sales Engineer Interview Questions & Answers
Rostfrei Steels
Anonymous
posted on 3 Nov 2024
Selected
I applied via Company Website and was interviewed in Oct 2024. There was 1 interview round.
(2 Questions)
- Q1. Some basics questions regarding my graduation subjects.
- Q2. Want to check my problem solving abilities
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Sep 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Last company working experience
- Q2. Sap related working and T code
(2 Questions)
- Q1. What is your long term goal and short term also ?
- Q2. Explain about the working style ?
Interview Preparation Tips
JSC Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Team Lead Interview Questions
- Software Engineer Interview Questions
- Software Developer Interview Questions
- Senior Associate Interview Questions
- Sales Executive Interview Questions
- Consultant Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Java Developer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
Dhoot Transmission
Amphenol Interconnect
Ag Industries
Prama Hikvision India
Calculate your in-hand salary
- Home >
- Interviews >
- JSC Interview Questions
