Filter interviews by
Testing the reason of material involves analyzing its properties and characteristics to ensure it meets quality standards.
Conducting various tests such as tensile strength, hardness, and chemical composition analysis
Comparing test results with established specifications and standards
Identifying any deviations or defects in the material
Ensuring compliance with regulatory requirements
Implementing corrective actions ...
I will first analyze the root cause of the quality problem, create an action plan, implement corrective measures, and monitor the results.
Analyze the root cause of the quality problem
Create an action plan to address the issue
Implement corrective measures to improve quality
Monitor the results to ensure effectiveness
Communicate with stakeholders throughout the process
Identifying project risks and mitigation options based on different scenarios.
Identify potential risks such as budget overruns, delays in project timeline, resource constraints, etc.
Develop mitigation strategies for each identified risk, such as contingency planning, risk transfer, or risk acceptance.
Regularly monitor and assess the effectiveness of the mitigation strategies to ensure they are still relevant and e...
Distillation is a process used to separate components of a liquid mixture based on their boiling points.
Distillation involves heating a liquid mixture to create vapor, then cooling the vapor to collect the separated components.
Types of distillation include simple distillation, fractional distillation, and steam distillation.
Simple distillation is used for separating components with significantly different boiling ...
A pump is a mechanical device used to move fluids from one place to another. There are different types of pumps based on their working principle and application.
Pumps can be classified into two main types: positive displacement pumps and centrifugal pumps.
Positive displacement pumps move fluid by trapping a fixed amount and forcing it into a discharge pipe. Examples include piston pumps and diaphragm pumps.
Centrif...
DCS stands for Distributed Control System, used to control and monitor industrial processes.
DCS is a computerized control system used in manufacturing and industrial processes.
It is used to monitor and control various processes such as temperature, pressure, flow, and level.
DCS allows for remote monitoring and control of processes, improving efficiency and reducing downtime.
Examples of industries that use DCS incl...
The required pressures for any fire pump depend on various factors such as building size, fire protection system design, and local regulations.
The required pressures for fire pumps are typically determined by fire protection engineers during the design phase.
Factors that influence the required pressures include the size and height of the building, the type of fire protection system (sprinklers, standpipes, etc.), ...
Security refers to the measures taken to protect people, assets, and information from harm or unauthorized access.
Security involves identifying and assessing potential risks and vulnerabilities
It includes implementing measures to prevent or mitigate those risks
Security also involves monitoring and responding to incidents or breaches
Examples of security measures include access controls, encryption, and surveillance
...
Fire types include A, B, C, D, and K; 5S is a methodology for organizing and improving workplace efficiency.
Class A fires involve ordinary combustibles like wood and paper.
Class B fires involve flammable liquids such as gasoline and oil.
Class C fires involve electrical equipment and require non-conductive extinguishing agents.
Class D fires involve combustible metals like magnesium and titanium.
Class K fires are re...
STP is sewage treatment plant that treats wastewater to make it safe for disposal. Hooter is an alarm system used in STPs.
STP stands for sewage treatment plant
It treats wastewater to remove contaminants and make it safe for disposal
Hooter is an alarm system used in STPs to alert operators of any issues or malfunctions
Education requirements for STP operators vary by location and employer
Treating sewage water involv...
I appeared for an interview in May 2025, where I was asked the following questions.
Choosing between a star-delta starter and a VFD for induction motor starting depends on application needs and control requirements.
Star-delta starters reduce starting current and torque, suitable for fixed-speed applications.
VFDs provide variable speed control, energy savings, and soft starting, ideal for applications needing speed variation.
Example: A star-delta starter is often used in large pumps, while a VFD is pre...
A drop in power factor leads to increased losses and costs for a company due to inefficiencies in power usage.
Lower power factor means more reactive power, leading to higher energy costs.
Utilities may impose penalties for low power factor, increasing operational expenses.
Example: A factory with a power factor of 0.7 may pay more than one with a power factor of 0.9.
Improving power factor can reduce electricity bills and...
I appeared for an interview in Nov 2024.
I appeared for an interview in Mar 2025, where I was asked the following questions.
I appeared for an interview in Aug 2024.
Distillation is a process used to separate components of a liquid mixture based on their boiling points.
Distillation involves heating a liquid mixture to create vapor, then cooling the vapor to collect the separated components.
Types of distillation include simple distillation, fractional distillation, and steam distillation.
Simple distillation is used for separating components with significantly different boiling point...
Heat exchangers are devices used to transfer heat between two or more fluids.
Types of heat exchangers include shell and tube, plate, and finned tube.
Shell and tube heat exchangers are commonly used in industrial applications.
Plate heat exchangers are compact and efficient, often used in HVAC systems.
Finned tube heat exchangers are used when one fluid has a high heat transfer coefficient.
A pump is a mechanical device used to move fluids from one place to another. There are different types of pumps based on their working principle and application.
Pumps can be classified into two main types: positive displacement pumps and centrifugal pumps.
Positive displacement pumps move fluid by trapping a fixed amount and forcing it into a discharge pipe. Examples include piston pumps and diaphragm pumps.
Centrifugal ...
I am a passionate engineering graduate with hands-on experience in production processes and a keen interest in optimizing operations.
Educational Background: Completed my Bachelor's in Mechanical Engineering from XYZ University, where I excelled in production management courses.
Internship Experience: Completed a summer internship at ABC Manufacturing, where I assisted in streamlining assembly line processes, improving e...
posted on 14 May 2024
Identifying project risks and mitigation options based on different scenarios.
Identify potential risks such as budget overruns, delays in project timeline, resource constraints, etc.
Develop mitigation strategies for each identified risk, such as contingency planning, risk transfer, or risk acceptance.
Regularly monitor and assess the effectiveness of the mitigation strategies to ensure they are still relevant and effect...
I applied via Recruitment Consulltant and was interviewed in Nov 2023. There were 3 interview rounds.
Top trending discussions
Some of the top questions asked at the Johnson Matthey interview -
based on 40 interview experiences
Difficulty level
Duration
based on 423 reviews
Rating in categories
Assistant Manager
97
salaries
| ₹9.8 L/yr - ₹18 L/yr |
Deputy Manager
30
salaries
| ₹9.8 L/yr - ₹21.4 L/yr |
Senior Officer
21
salaries
| ₹7.8 L/yr - ₹14.1 L/yr |
Technician
17
salaries
| ₹2 L/yr - ₹8.5 L/yr |
Security Officer
16
salaries
| ₹2.2 L/yr - ₹8.2 L/yr |
Bajaj Motors
Knorr-Bremse
Delta Electronics
Gestamp