Upload Button Icon Add office photos

John Deere

Compare button icon Compare button icon Compare

Filter interviews by

John Deere Junior Mechanical Engineer Interview Questions and Answers

Updated 6 Jul 2017

John Deere Junior Mechanical Engineer Interview Experiences

2 interviews found

Interview Preparation Tips

Round: Resume Shortlist
Experience: Some people or admin of that company came out and call me for interview by using call or sms.
Tips: This is primary round.

Round: Test
Experience: I solving the aptitude problem by using logic.
Tips: Its secondary round and it's very important.
Duration: 1 hour
Total Questions: 30

College Name: Sanmati college of engineering washim

I appeared for an interview before Jul 2016.

Interview Questionnaire 

1 Question

  • Q1. Ask about the various types of engines and more

Interview Preparation Tips

Round: Resume Shortlist
Experience: My resume was shortlisted by that company and they call me and give some sms.
Tips: Its primary round

Round: Test
Experience: I'm start solving the question of that exam.
Tips: Its secondary round.
Duration: 1 hour
Total Questions: 30

Round: HR Interview
Experience: Nothing special but for me it's one of the toughest interview for me.
Tips: Its my final round and I'm selected in that comaony.

College Name: Sanmati college of engineering washim

Junior Mechanical Engineer Interview Questions Asked at Other Companies

asked in JSW Steel
Q1. Types of gearbox and which gearbox is maximum used in your plant?
Q2. How to improve cycle time and how to do rejection control
Q3. What are the steel plants in India What do you know about compres ... read more
Q4. Why does the air only contain water vapor and not other kinds of ... read more
Q5. What are the differences between the 304, 304L, and 316 stainless ... read more

Interview questions from similar companies

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.

I applied via Walk-in and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Sourcing and Vendor development related

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical of ZBC and Manufacturing process.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What is your highest qualification
  • Ans. 

    My highest qualification is a Master's degree in Electrical Engineering.

    • Master's degree in Electrical Engineering

    • Specialized in power systems

    • Thesis focused on renewable energy integration

    • Completed advanced courses in control systems

    • Published research papers in IEEE conferences

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. What is your role and responsibilities in the project quality?
  • Ans. 

    As a Senior Engineer, my role in project quality is to ensure that all deliverables meet the required standards and specifications.

    • Developing and implementing quality assurance processes and procedures

    • Conducting regular audits and inspections to identify any quality issues

    • Collaborating with cross-functional teams to address and resolve quality concerns

    • Creating and maintaining quality documentation, including test plans...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Case based question
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tell me about yourself ?
  • Q2. About your work experience?

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidence , good energy level
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Most interview question based on resume only. And related oil and gas industry.
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Topics to prepare for TechnipFMC Senior Engineer interview:
  • API 6A
  • Subsea
  • Pressure Handling
Interview preparation tips for other job seekers - Go with confidence
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Basic Geotechnical questions
  • Q2. Piling Design, Shallow Foundation Design, International Codes for subsea structure foundation designs.

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic Design knowledge should be must.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I appeared for an interview before Jun 2021.

Round 1 - Technical 

(2 Questions)

  • Q1. Input output list the digital and analog signals from field instruments to control room via the single core and multicore cables via the junction boxes.
  • Q2. What is dca an# plc
  • Ans. 

    DCA and PLC are commonly used acronyms in the field of engineering.

    • DCA stands for Direct Current Amplifier, which is a device used to amplify direct current signals.

    • PLC stands for Programmable Logic Controller, which is a digital computer used for automation of electromechanical processes.

    • DCA and PLC are essential components in various engineering applications such as industrial automation and control systems.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn hard and work hard

Skills evaluated in this interview

Tell us how to improve this page.

Interview Questions from Similar Companies

ABB Interview Questions
4.1
 • 241 Interviews
Cummins Interview Questions
4.3
 • 233 Interviews
Caterpillar Inc Interview Questions
4.2
 • 177 Interviews
KONE Interview Questions
4.1
 • 103 Interviews
Hitachi Interview Questions
4.0
 • 81 Interviews
Atlas Copco Interview Questions
4.2
 • 79 Interviews
TechnipFMC Interview Questions
4.0
 • 72 Interviews
TÜV SÜD Interview Questions
3.9
 • 64 Interviews
Hilti Interview Questions
3.5
 • 61 Interviews
View all

John Deere Junior Mechanical Engineer Reviews and Ratings

based on 2 reviews

4.9/5

Rating in categories

4.1

Skill development

4.0

Work-life balance

4.0

Salary

4.0

Job security

4.1

Company culture

3.9

Promotions

3.9

Work satisfaction

Explore 2 Reviews and Ratings
Senior Engineer
1.1k salaries
unlock blur

₹7.5 L/yr - ₹23 L/yr

Lead Engineer
730 salaries
unlock blur

₹13 L/yr - ₹31.3 L/yr

Technical Trainee
581 salaries
unlock blur

₹1.2 L/yr - ₹3.2 L/yr

Senior Software Engineer
402 salaries
unlock blur

₹8.5 L/yr - ₹22.5 L/yr

Assistant Technician
318 salaries
unlock blur

₹2 L/yr - ₹4.3 L/yr

Explore more salaries
Compare John Deere with

Cummins

4.3
Compare

ABB

4.1
Compare

Tractors and Farm Equipment

4.0
Compare

KONE

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview