i
Jio
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
I applied via Referral and was interviewed in Apr 2023. There were 3 interview rounds.
I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.
RF KPIs are key performance indicators used to measure the performance of radio frequency networks.
RF KPIs can include metrics such as signal strength, signal-to-noise ratio, throughput, latency, and coverage.
Examples of RF KPIs include RSRP (Reference Signal Received Power), RSRQ (Reference Signal Received Quality), SINR (Signal-to-Interference plus Noise Ratio), and throughput.
Monitoring RF KPIs helps in optimizing n...
I applied via Company Website and was interviewed in Dec 2024. There were 2 interview rounds.
What is aptitude test?
I was interviewed in Mar 2023.
VSAT link network issue
Check for any physical damage to the VSAT equipment
Ensure proper alignment of the VSAT dish
Check for any interference from nearby structures or equipment
Verify the configuration settings of the VSAT modem
I applied via Walk-in and was interviewed before Nov 2022. There were 2 interview rounds.
I applied via Approached by Company and was interviewed before Oct 2022. There were 2 interview rounds.
9ASR is a method used in project management to track progress and ensure goals are met.
9ASR stands for 9-Step Approach to Project Management
It involves defining project scope, objectives, and deliverables
Setting up a project plan, assigning tasks, and monitoring progress
Regularly reviewing and adjusting the plan as needed
Ensuring all stakeholders are informed and involved in the process
posted on 20 Jul 2020
I applied via Referral and was interviewed before Jul 2019. There was 1 interview round.
The type of transformer used in telecom tower sites is typically a step-down transformer.
Step-down transformers are used to reduce the high voltage from the power grid to a lower voltage suitable for telecom equipment.
These transformers are usually single-phase and have a power rating of a few kilovolt-amperes (kVA).
They are designed to provide a stable and reliable power supply to the telecom equipment at the tower si...
SMPS stands for Switched Mode Power Supply, which is an electronic power supply that uses a switching regulator to convert electrical power efficiently.
SMPS is commonly used in electronic devices such as computers, televisions, and mobile phones.
It uses a switching regulator to convert AC power to DC power.
SMPS is more efficient than traditional linear power supplies.
It can be designed to provide different output volta...
A rectifier is an electrical device that converts alternating current (AC) to direct current (DC).
Rectifiers are commonly used in power supplies and electronic devices.
They typically consist of diodes that allow current to flow in only one direction.
Rectifiers can be half-wave or full-wave, depending on the number of diodes used.
Examples of rectifiers include bridge rectifiers, vacuum tube rectifiers, and solid-state r
PAC stands for Programmable Automation Controller, a type of industrial control system used for automation and monitoring.
PACs are similar to PLCs but have more advanced capabilities such as data processing and communication.
They are used in various industries including manufacturing, energy, and transportation.
PACs can be programmed using various languages such as ladder logic, structured text, and C++.
Examples of PAC...
Coding decoding, lcm, hcf, speed, percentage, vector
The interviewer is asking for your name.
Provide your first and last name
Be clear and confident in your response
I applied via Walk-in and was interviewed before May 2022. There was 1 interview round.
To connect 12 batteries for required output, connect them in series or parallel depending on the battery output.
Check the voltage and current output of each battery
If the batteries have the same voltage output, connect them in parallel to increase the current output
If the batteries have different voltage output, connect them in series to increase the voltage output
Use a battery management system to ensure proper chargi
Yes
I am comfortable working offshore for extended periods of time.
I have experience working in remote locations and adapting to challenging environments.
I am physically and mentally prepared to handle the demands of offshore work.
I understand the importance of safety protocols and adhere to them diligently.
I am a team player and can maintain positive relationships with colleagues in isolated settings.
I applied via Referral and was interviewed in Feb 2021. There was 1 interview round.
VSWR stands for Voltage Standing Wave Ratio. It is a measure of how well the impedance of a transmission line matches the input/output impedance of the connected device.
VSWR is a ratio of the maximum voltage to the minimum voltage in a standing wave pattern along a transmission line.
It is used to measure the efficiency of power transfer between a device and a transmission line.
A VSWR of 1:1 indicates perfect impedance ...
RSL stands for Received Signal Level, which is a measure of the strength of a received radio signal.
RSL is commonly used in the telecommunications industry to measure the strength of a signal received by a device.
It is usually measured in decibels (dB) and can be used to determine the quality of a signal.
RSL can be affected by various factors such as distance, obstacles, and interference.
For example, a weak RSL may ind...
RRU stands for Remote Radio Unit, a component of a base station used in wireless communication networks.
RRU is responsible for transmitting and receiving radio signals to and from the antenna.
It is usually located at the top of a cell tower or on a rooftop.
RRUs are used in technologies such as 4G LTE and 5G.
They are designed to be compact and energy-efficient.
RRUs can be easily replaced or upgraded without affecting th...
ODU stands for Outdoor Unit. It is a component of a wireless communication system that is installed outside a building or structure.
ODU is responsible for transmitting and receiving signals between the indoor unit and the base station.
It is designed to withstand harsh weather conditions and is usually mounted on a rooftop or a pole.
ODUs are commonly used in microwave and satellite communication systems.
Examples of ODU ...
Yes, I am familiar with weblct login.
I have experience logging into weblct for various projects.
I am comfortable navigating the weblct interface.
I am able to troubleshoot any login issues that may arise.
No, I am not familiar with login TN.
I am not sure what login TN refers to.
Can you provide more context or information about login TN?
I am willing to learn and adapt to new technologies and systems.
based on 3 interviews
Interview experience
based on 13 reviews
Rating in categories
Assistant Manager
5.4k
salaries
| ₹1.2 L/yr - ₹10.5 L/yr |
Deputy Manager
3.4k
salaries
| ₹4.2 L/yr - ₹13.8 L/yr |
Manager
1.8k
salaries
| ₹6 L/yr - ₹22.4 L/yr |
Senior Executive
1.5k
salaries
| ₹1.7 L/yr - ₹8 L/yr |
Senior Manager
1.4k
salaries
| ₹10.3 L/yr - ₹30.6 L/yr |
Jio Platforms
Bharti Airtel
Vodafone Idea
Bharat Sanchar Nigam