Filter interviews by
I applied via Naukri.com and was interviewed before Jun 2023. There were 2 interview rounds.
LRSS is used for starting the high tension motor in a controlled manner.
LRSS stands for Line Reactor Soft Starter.
It is used to reduce the starting current and torque in high tension motors.
Helps in preventing mechanical shocks and electrical disturbances during motor start-up.
Improves the lifespan of the motor by providing a smooth start.
Example: LRSS is commonly used in industries where large motors are required to s
4 quadrant operation of VFD refers to the ability of a variable frequency drive to control the speed and direction of a motor in both forward and reverse directions.
Allows the VFD to control the motor speed and direction in all four quadrants of the speed-torque curve
Quadrant 1: Forward motoring
Quadrant 2: Reverse motoring
Quadrant 3: Regenerative braking
Quadrant 4: Regenerative braking in reverse direction
I applied via Referral and was interviewed before Aug 2022. There was 1 interview round.
I successfully negotiated pricing with a supplier by leveraging long-term partnership and volume commitments.
Established a strong relationship with the supplier based on trust and mutual benefit
Leveraged long-term partnership to negotiate better pricing or terms
Committed to volume purchases in exchange for cost savings
Used market research and competitive analysis to support negotiation points
I manage and track material usage and consumption through inventory management systems and regular audits.
Utilize inventory management software to track material usage in real-time
Conduct regular audits to reconcile physical inventory with recorded amounts
Implement barcode scanning or RFID technology for accurate tracking
Maintain detailed records of material receipts, usage, and waste
Utilize FIFO (First In, First Out) ...
I applied via Campus Placement and was interviewed before Apr 2023. There was 1 interview round.
Stainless steel is a corrosion-resistant alloy made of iron, chromium, nickel, and other elements.
Stainless steel is known for its resistance to corrosion, staining, and rust.
It is commonly used in kitchen appliances, cutlery, surgical instruments, and construction materials.
There are different grades of stainless steel, each with varying levels of corrosion resistance and strength.
Stainless steels are generally weldable, but certain grades may require preheating and post-weld heat treatment for optimal results.
Stainless steels are classified into three main groups: austenitic, ferritic, and martensitic.
Austenitic stainless steels (e.g. 304, 316) are the most commonly used and are generally considered highly weldable.
Ferritic stainless steels (e.g. 430) have lower weldability due to their high ca...
PREN number formula is used to calculate the pitting resistance equivalent number for stainless steels.
PREN = %Cr + 3.3(%Mo) + 16(%N)
PREN is used to predict the pitting corrosion resistance of stainless steels
Higher PREN values indicate better resistance to pitting corrosion
Sensitization of austenitic stainless steel refers to the loss of corrosion resistance due to the formation of chromium carbides at grain boundaries.
Sensitization occurs when austenitic stainless steel is exposed to temperatures between 450-850°C for an extended period of time.
This leads to the depletion of chromium at the grain boundaries, making them susceptible to corrosion.
Common examples of sensitization include T...
I applied via Naukri.com and was interviewed before Mar 2023. There were 2 interview rounds.
Jindal Stainless interview questions for designations
I applied via Recruitment Consultant and was interviewed in Feb 2021. There was 1 interview round.
Get interview-ready with Top Jindal Stainless Interview Questions
I applied via Other and was interviewed before May 2018. There were 4 interview rounds.
The tension on the sheet can be calculated by measuring the force applied by the pay off reel.
Tension can be calculated by measuring the force applied by the pay off reel
The force can be measured using load cells or tension sensors
The tension can be calculated using the formula: Tension = Force / Width of the sheet
Example: If the force applied by the pay off reel is 1000 N and the width of the sheet is 2 meters, the te
If there is leakage inside the De Oxo furnace of the galvanising line, it can lead to various consequences.
Leakage can result in the release of harmful gases or chemicals, posing a risk to the environment and workers' health.
It can disrupt the galvanising process, affecting the quality of the coated products.
Leakage may cause damage to the furnace equipment, leading to costly repairs or downtime.
Immediate action should...
The line I am working on is responsible for managing the production of widgets.
The line operates 24/7 and consists of multiple stations where different tasks are performed.
Each station has a specific role in the production process, such as assembly, quality control, and packaging.
The line is designed to maximize efficiency and minimize downtime by implementing lean manufacturing principles.
We use automated machines and...
Seeking new challenges and growth opportunities in a dynamic work environment.
Desire for career advancement
Seeking new challenges and learning opportunities
Looking for a more dynamic work environment
Interested in expanding skill set and experience
Top trending discussions
Some of the top questions asked at the Jindal Stainless Associate Manager interview -
The duration of Jindal Stainless Associate Manager interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 27 interviews
2 Interview rounds
based on 185 reviews
Rating in categories
Junior Engineer
1.2k
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Manager
1.1k
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive Engineer
691
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
646
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
411
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
ArcelorMittal Nippon Steel