Premium Employer

i

This company page is being actively managed by JGC Corporation Team. If you also belong to the team, you can get access from here

JGC Corporation Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

JGC Corporation Electrical GET Interview Questions, Process, and Tips for Freshers

Updated 6 Nov 2024

JGC Corporation Electrical GET Interview Experiences for Freshers

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Oct 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

Basic topics like India before covid and after covid, Global warming, Educational System in india

Round 2 - Technical 

(4 Questions)

  • Q1. What is transformer?
  • Ans. 

    A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Consists of two coils of wire, known as primary and secondary coils

    • Primary coil receives electrical energy and induces a magnetic field

    • Magnetic field then induces a voltage in the secondary coil

    • Used to step up or step down voltage levels in electrical systems

  • Answered by AI
  • Q2. What are the types of Rectifiers?
  • Ans. 

    Types of rectifiers include half-wave, full-wave, and bridge rectifiers.

    • Half-wave rectifier only allows one half of the AC input waveform to pass through

    • Full-wave rectifier allows both halves of the AC input waveform to pass through

    • Bridge rectifier uses four diodes to rectify the AC input waveform

    • Examples include diode rectifiers and semiconductor rectifiers

  • Answered by AI
  • Q3. Difference between Synchronous and induction motor
  • Ans. 

    Synchronous motors have constant speed and require external excitation, while induction motors have variable speed and are self-starting.

    • Synchronous motors have a constant speed determined by the frequency of the power supply.

    • Induction motors have variable speed depending on the load.

    • Synchronous motors require external excitation to generate a magnetic field, while induction motors are self-starting.

    • Synchronous motors ...

  • Answered by AI
  • Q4. What is Ohms law?
  • Ans. 

    Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it, and inversely proportional to the resistance of the conductor.

    • Ohm's law is represented by the formula: V = I * R, where V is voltage, I is current, and R is resistance.

    • It helps in calculating the relationship between voltage, current, and resistance in an electrical circuit.

    • For example, if a circuit has a vo...

  • Answered by AI
Round 3 - HR 

(3 Questions)

  • Q1. Will you ready to go to abroad after 5 years?
  • Ans. 

    Yes, I am open to the possibility of going abroad after 5 years for career advancement and new experiences.

    • I am open to exploring international opportunities for career growth.

    • I believe working abroad can provide valuable experiences and broaden my perspective.

    • I am willing to adapt to new cultures and environments for professional development.

  • Answered by AI
  • Q2. Why you have not choose higher education
  • Ans. 

    I chose to start working in the electrical field to gain practical experience and skills rather than pursuing higher education.

    • Prefer hands-on learning over theoretical education

    • Opportunity to gain real-world experience in the field

    • Financial constraints prevented pursuing higher education

    • Passionate about electrical work and wanted to start career sooner

  • Answered by AI
  • Q3. Family details and Occupation

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare basic interview and speak confidently

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Campus Placement and was interviewed before Jan 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

General aptitude and reasoning and technical questions. Technical you can practice from indiabix, examveda...

Round 2 - Group Discussion 

Be confident and get some insights of industry.

Round 3 - Technical 

(3 Questions)

  • Q1. What is starter of induction motor.
  • Ans. 

    A starter of an induction motor is a device used to control the starting current and torque of the motor.

    • The starter helps in reducing the high starting current drawn by the motor.

    • It provides a controlled start to the motor, preventing any damage to the motor windings.

    • There are different types of starters used for induction motors, such as direct-on-line (DOL) starters, star-delta starters, and auto-transformer starter...

  • Answered by AI
  • Q2. What is renewable energy
  • Ans. 

    Renewable energy is energy that is generated from natural resources that are constantly replenished, such as sunlight, wind, and water.

    • Renewable energy is derived from sources that are naturally replenished over a short period of time.

    • It is considered sustainable because it does not deplete finite resources.

    • Examples of renewable energy sources include solar power, wind power, hydropower, geothermal energy, and biomass.

    • ...

  • Answered by AI
  • Q3. How wind power is generated
  • Ans. 

    Wind power is generated by converting the kinetic energy of wind into electrical energy using wind turbines.

    • Wind turbines capture the energy from the wind and convert it into rotational motion.

    • The rotational motion is then used to spin a generator, which produces electricity.

    • Wind power is a renewable energy source that is clean and does not produce greenhouse gas emissions.

    • Wind farms consist of multiple wind turbines g...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Get the basic clear nothing complex here.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Not Selected

I applied via Approached by Company and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Basics of aptitude , english , and technical question

Round 2 - Technical 

(1 Question)

  • Q1. Basics of electrical engineering
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed in Jan 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

Just applied for approval to appear

Round 2 - Assignment 

Jst apply for appear in the assignment

Round 3 - Technical 

(4 Questions)

  • Q1. Just applied for the same in increasing
  • Q2. Cement classic for the same
  • Q3. Transportation and logistics in the market
  • Ans. 

    Transportation and logistics play a crucial role in the market by ensuring efficient movement of goods and services.

    • Transportation helps in connecting producers with consumers by moving goods from one place to another.

    • Logistics involves the coordination of resources and processes to ensure timely delivery of products.

    • Efficient transportation and logistics can lead to cost savings and improved customer satisfaction.

    • Exam...

  • Answered by AI
  • Q4. Strength of reinforcement of mild steel
  • Ans. 

    The strength of reinforcement of mild steel is determined by its yield strength and ultimate tensile strength.

    • The strength of reinforcement of mild steel is typically around 250 MPa to 600 MPa.

    • Yield strength is the point at which the material permanently deforms, while ultimate tensile strength is the maximum stress a material can withstand before breaking.

    • Reinforcement bars in construction are commonly made of mild st

  • Answered by AI
Round 4 - One-on-one 

(1 Question)

  • Q1. Just applied for the same in the assignment

Interview Preparation Tips

Interview preparation tips for other job seekers - Just applied for appear
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Campus Placement and was interviewed in Feb 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Moderate level aptitude

Round 2 - Technical 

(1 Question)

  • Q1. Basics on electronics and communication
Round 3 - HR 

(1 Question)

  • Q1. Behavior questions
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

General questions are asked.

Round 2 - Group Discussion 

Five people sit together in a group to discuss a particular topic.

Round 3 - Technical 

(3 Questions)

  • Q1. What are the core topics related to your profile?
  • Ans. 

    Core topics related to Electrical GET profile include power systems, control systems, electronics, and electrical machines.

    • Power systems: Study of generation, transmission, and distribution of electrical power.

    • Control systems: Analysis and design of systems that regulate or control other systems.

    • Electronics: Study of electronic components, circuits, and systems.

    • Electrical machines: Study of motors, generators, and tran

  • Answered by AI
  • Q2. Analysis part based on your core strength
  • Q3. Software technical question
Round 4 - HR 

(2 Questions)

  • Q1. Can you provide an overview of yourself?
  • Ans. 

    I am a recent graduate with a degree in Electrical Engineering, eager to learn and contribute in the field.

    • Recent graduate with a degree in Electrical Engineering

    • Passionate about learning and contributing in the field

    • Experience with circuit design and analysis

    • Familiar with programming languages like C++ and Python

  • Answered by AI
  • Q2. Hobbies and responsibility

I applied via Company Website and was interviewed in May 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. What is MPLS and flow of labels in MPLS
  • Ans. 

    MPLS is a protocol used for efficient packet forwarding. It uses labels to identify paths instead of IP addresses.

    • MPLS stands for Multiprotocol Label Switching

    • Labels are assigned to packets at the ingress router

    • Labels are used to identify the path a packet should take through the network

    • Labels are swapped at each MPLS router along the path

    • The last MPLS router removes the label and forwards the packet based on the IP ad...

  • Answered by AI
  • Q2. What is route reflector in BGP
  • Ans. 

    Route reflector is a BGP feature that allows a router to advertise routes to its clients without requiring full mesh connectivity.

    • Route reflector reduces the number of iBGP peerings required in a network.

    • It helps in scaling the network by reducing the number of updates and processing required.

    • Route reflector can be configured in a hierarchical manner to further reduce the number of iBGP peerings.

    • It is commonly used in ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for the role or profile for which you are applying. Brushup basics about all the topics for your role

Skills evaluated in this interview

I applied via Referral and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions relating to our job in deep. That's it

Interview Preparation Tips

Interview preparation tips for other job seekers - Whatever you know about say genuinely and be confident always. Don't hesitate at all.
Put your thoughts clearly.

I applied via Approached by Company and was interviewed in Oct 2018. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Baching plant Rmu Tamrock Shotcrete machine Grouting pumps Layout of project Crusher plant
  • Q2. Why you want to join Why you want to leave Why we hire you
  • Ans. 

    I want to join to further develop my skills, seeking new challenges. I am leaving for career growth opportunities. You should hire me for my experience and expertise.

    • Seeking new challenges and opportunities for skill development

    • Leaving for career growth and advancement

    • Experience and expertise in the field

    • Ability to contribute effectively to the team and projects

  • Answered by AI

Interview Preparation Tips

General Tips: Be positive
Be prepared
Be calm
Don't be stressed


Skills: Communication, Problem Solving, Leadership, Time Management
Duration: <1 week

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.

JGC Corporation Interview FAQs

How many rounds are there in JGC Corporation Electrical GET interview for freshers?
JGC Corporation interview process for freshers usually has 3 rounds. The most common rounds in the JGC Corporation interview process for freshers are Group Discussion, Technical and HR.
What are the top questions asked in JGC Corporation Electrical GET interview for freshers?

Some of the top questions asked at the JGC Corporation Electrical GET interview for freshers -

  1. what are the types of Rectifie...read more
  2. Difference between Synchronous and induction mo...read more
  3. what is transform...read more

Tell us how to improve this page.

JGC Corporation Electrical GET Interview Process for Freshers

based on 1 interview

Interview experience

4
  
Good
View more
Join JGC Corporation Enhancing Planetary Health

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 744 Interviews
Tata Projects Interview Questions
4.2
 • 426 Interviews
Adani Group Interview Questions
3.9
 • 187 Interviews
Saint-Gobain Interview Questions
4.0
 • 172 Interviews
AECOM Interview Questions
4.2
 • 115 Interviews
Worley Interview Questions
4.1
 • 111 Interviews
AtkinsRealis Interview Questions
4.0
 • 87 Interviews
View all
Piping Engineer
15 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Principal Engineer
14 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Designer
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Process Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Principal Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare JGC Corporation with

L&T Energy Hydrocarbon

3.8
Compare

TechnipFMC

4.0
Compare

Punj Lloyd

4.3
Compare

Essar Group

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview