Add office photos
i
Jayem Automotives
Compare
Filter interviews by
Jayem Automotives QA Engineer Interview Questions and Answers
Jayem Automotives QA Engineer Interview Experiences
1 interview found
I applied via Company Website and was interviewed before Mar 2021. There were 4 interview rounds.
(1 Question)
- Q1. Questions asked from your previous work experience
(1 Question)
- Q1. Why are you looking for a change?
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
QA Engineer Interview Questions & Answers
American Axle & Manufacturing
Anonymous
posted on 5 Oct 2021
I was interviewed before Oct 2020.
Interview Questionnaire
8 Questions
- Q1. What is Quality?
- Ans.
Quality is meeting or exceeding customer expectations and requirements.
Quality is a measure of how well a product or service meets customer needs.
It involves meeting or exceeding customer expectations and requirements.
Quality can be measured through various metrics such as defect rate, customer satisfaction, and reliability.
Quality is a continuous process that requires constant improvement and monitoring.
Examples of qu...
- Q2. Questions related to guages
- Q3. Difference between QA &QC
- Ans.
QA is the process of ensuring quality in the software development process, while QC is the process of ensuring quality in the final product.
QA is a proactive process that focuses on preventing defects from occurring in the first place.
QC is a reactive process that focuses on identifying defects in the final product.
QA involves activities such as requirement analysis, test planning, and test case development.
QC involves...
- Q4. How differential works?
- Ans.
Differential is a device that splits torque between two wheels while allowing them to rotate at different speeds.
Differential is found in the drivetrain of vehicles.
It allows the wheels to rotate at different speeds while still receiving power from the engine.
It consists of a ring gear, pinion gear, and side gears.
When a vehicle turns, the outside wheel travels a greater distance than the inside wheel, and the differen...
- Q5. PLM reading
- Q6. What is LPA?
- Ans.
LPA stands for Layered Process Audit, a quality control technique used in manufacturing.
LPA involves regular checks of critical processes to ensure they are being followed correctly.
It helps identify and correct issues before they become major problems.
LPA is often used in automotive and aerospace industries.
It involves a team of auditors who perform checks at different levels of the manufacturing process.
- Q7. SPC parameters
- Q8. What is Quality Policy?
- Ans.
Quality Policy is a statement that outlines an organization's commitment to quality and its approach to achieving it.
It is a formal document that defines an organization's quality objectives and goals.
It outlines the responsibilities of each employee in maintaining quality standards.
It is reviewed and updated regularly to ensure its relevance and effectiveness.
Examples of quality policies include 'We are committed to p...
Interview Preparation Tips
I applied via LinkedIn and was interviewed before Aug 2021. There were 2 interview rounds.
(1 Question)
- Q1. What is different between star and delta connection?
- Ans.
Star and delta connections are two types of three-phase circuits used in electrical engineering.
Star connection has a neutral point and three phases are connected to it, while in delta connection, three phases are connected in a closed loop.
Star connection is used for low voltage applications, while delta connection is used for high voltage applications.
Star connection provides better safety and flexibility, while delt...
Interview Preparation Tips
Selected
I applied via Referral and was interviewed in Jul 2024. There were 3 interview rounds.
(3 Questions)
- Q1. What are problem solving tools
- Ans.
Problem solving tools are techniques or methods used to identify, analyze, and solve problems in a systematic way.
Root cause analysis
Fishbone diagram
5 Whys technique
Pareto analysis
Brainstorming
SWOT analysis
- Q2. What do you know about CMM Inspection
- Ans.
CMM Inspection is a process used in manufacturing to measure the physical geometrical characteristics of an object.
CMM stands for Coordinate Measuring Machine
It is used to ensure the quality and accuracy of manufactured parts
CMM Inspection involves probing the surface of an object to collect data points for measurement
The data collected is compared to the design specifications to determine if the part meets requirement
- Q3. How alignment is done in CMM Program
- Ans.
Alignment in CMM program is done by calibrating the machine to ensure accurate measurements.
Alignment in CMM program involves calibrating the machine to a known standard or reference point.
This calibration process ensures that the machine is measuring accurately and consistently.
Alignment may involve adjusting the machine's axes to ensure they are perpendicular or parallel to each other.
Regular maintenance and calibrat...
(3 Questions)
- Q1. Where do you live
- Ans.
I live in a quiet neighborhood in the suburbs of the city.
I live in a house with a small backyard.
My neighborhood has a community park and walking trails.
I am located about 30 minutes away from the city center.
There are grocery stores and restaurants within walking distance.
- Q2. Can you work in shift
- Ans.
Yes, I am willing to work in shifts as required for the role of Sr. Engineer-QA.
I am flexible with my working hours and can adjust to different shifts
I have previous experience working in shifts in my previous roles
I understand the importance of round-the-clock QA support in a fast-paced environment
- Q3. Can you relocate for work
- Ans.
Yes, I am open to relocating for work if the opportunity aligns with my career goals.
I am open to relocating for the right job opportunity
I have relocated for work in the past and am willing to do so again
I understand the importance of being flexible and adaptable in the job market
Psychometric test according to situation
QA Engineer Interview Questions & Answers
American Axle & Manufacturing
Anonymous
posted on 5 Oct 2021
I was interviewed before Oct 2020.
Interview Questionnaire
8 Questions
- Q1. What is Quality?
- Ans.
Quality is meeting or exceeding customer expectations and requirements.
Quality is a measure of how well a product or service meets customer needs.
It involves meeting or exceeding customer expectations and requirements.
Quality can be measured through various metrics such as defect rate, customer satisfaction, and reliability.
Quality is a continuous process that requires constant improvement and monitoring.
Examples of qu...
- Q2. Questions related to guages
- Q3. Difference between QA &QC
- Ans.
QA is the process of ensuring quality in the software development process, while QC is the process of ensuring quality in the final product.
QA is a proactive process that focuses on preventing defects from occurring in the first place.
QC is a reactive process that focuses on identifying defects in the final product.
QA involves activities such as requirement analysis, test planning, and test case development.
QC involves...
- Q4. How differential works?
- Ans.
Differential is a device that splits torque between two wheels while allowing them to rotate at different speeds.
Differential is found in the drivetrain of vehicles.
It allows the wheels to rotate at different speeds while still receiving power from the engine.
It consists of a ring gear, pinion gear, and side gears.
When a vehicle turns, the outside wheel travels a greater distance than the inside wheel, and the differen...
- Q5. PLM reading
- Q6. What is LPA?
- Ans.
LPA stands for Layered Process Audit, a quality control technique used in manufacturing.
LPA involves regular checks of critical processes to ensure they are being followed correctly.
It helps identify and correct issues before they become major problems.
LPA is often used in automotive and aerospace industries.
It involves a team of auditors who perform checks at different levels of the manufacturing process.
- Q7. SPC parameters
- Q8. What is Quality Policy?
- Ans.
Quality Policy is a statement that outlines an organization's commitment to quality and its approach to achieving it.
It is a formal document that defines an organization's quality objectives and goals.
It outlines the responsibilities of each employee in maintaining quality standards.
It is reviewed and updated regularly to ensure its relevance and effectiveness.
Examples of quality policies include 'We are committed to p...
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed before Dec 2021. There were 2 interview rounds.
(2 Questions)
- Q1. Explain spc,msa and pdca
- Ans.
SPC (Statistical Process Control), MSA (Measurement System Analysis), and PDCA (Plan-Do-Check-Act) are quality management tools used to improve processes.
SPC involves monitoring and controlling a process to ensure it stays within acceptable limits
MSA is used to evaluate the measurement system's accuracy, precision, and stability
PDCA is a continuous improvement cycle that involves planning, executing, checking, and acti...
- Q2. Why you want to change the jlb
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Aug 2021. There was 1 interview round.
(2 Questions)
- Q1. Question were asked related to engineering base like from TOM,SOM, THERMODYNAMICS etc
- Q2. About project did in collage
Interview Preparation Tips
I applied via LinkedIn and was interviewed before Aug 2021. There were 2 interview rounds.
(1 Question)
- Q1. What is different between star and delta connection?
- Ans.
Star and delta connections are two types of three-phase circuits used in electrical engineering.
Star connection has a neutral point and three phases are connected to it, while in delta connection, three phases are connected in a closed loop.
Star connection is used for low voltage applications, while delta connection is used for high voltage applications.
Star connection provides better safety and flexibility, while delt...
Interview Preparation Tips
Jayem Automotives Interview FAQs
Tell us how to improve this page.
Jayem Automotives Interviews By Designations
Interview Questions for Popular Designations
- Senior QA Engineer Interview Questions
- Software QA Engineer Interview Questions
- Test Engineer Interview Questions
- QA Test Engineer Interview Questions
- Automation Test Engineer Interview Questions
- QA Automation Engineer Interview Questions
- Senior Test Engineer Interview Questions
- QA Trainee Interview Questions
- Show more
Interview Questions from Similar Companies
Jayem Automotives QA Engineer Reviews and Ratings
based on 3 reviews
Rating in categories
|
Vehicle Testing Engineer
33
salaries
|  ₹2.2 L/yr - ₹6.7 L/yr |
|
Engine Testing Engineer
28
salaries
| ₹1.8 L/yr - ₹5.2 L/yr |
|
Engineer
28
salaries
| ₹3 L/yr - ₹8.5 L/yr |
|
Test Engineer
26
salaries
| ₹1.5 L/yr - ₹7.6 L/yr |
|
Quality Engineer
24
salaries
| ₹1.5 L/yr - ₹6 L/yr |
Mahindra & Mahindra
Tata Motors
Ashok Leyland
Maruti Suzuki
- Home >
- Interviews >
- Jayem Automotives Interview Questions >
- Jayem Automotives QA Engineer Interview Questions
