Upload Button Icon Add office photos

ISMT

Compare button icon Compare button icon Compare

Filter interviews by

ISMT Production Engineer Interview Questions and Answers

Updated 8 Sep 2022

ISMT Production Engineer Interview Experiences

1 interview found

I applied via Referral and was interviewed in Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Types of Steel and their chemical composition.
  • Ans. 

    There are various types of steel with different chemical compositions, each with unique properties and uses.

    • Carbon Steel - primarily composed of iron and carbon

    • Alloy Steel - contains additional elements such as manganese, nickel, and chromium

    • Stainless Steel - contains at least 10.5% chromium and low carbon content

    • Tool Steel - high carbon content and additional elements such as tungsten and vanadium

    • High-Speed Steel - co...

  • Answered by AI
  • Q2. What is Heat treatment?
  • Ans. 

    Heat treatment is a process of heating and cooling metals to alter their physical and mechanical properties.

    • Heat treatment is used to improve the strength, hardness, toughness, and ductility of metals.

    • It involves heating the metal to a specific temperature and holding it there for a certain amount of time.

    • The metal is then cooled at a specific rate to achieve the desired properties.

    • Different types of heat treatment inc...

  • Answered by AI
  • Q3. Types of Heat treatment?
  • Ans. 

    Heat treatment is a process of heating and cooling metals to alter their physical and mechanical properties.

    • Annealing

    • Normalizing

    • Quenching

    • Tempering

    • Case hardening

    • Martempering

    • Austempering

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Worst working culture, don't join this company,

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. Fiast focus on basic knowledge, thous are you studying?
  • Q2. You mast be knowledge of computer & XL also a sap
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Shaft daimeter 40 mm wy bearings no
  • Q2. Ferro silicon melting point wy
  • Q3. Which composition is a ci casting
  • Ans. 

    CI casting refers to cast iron casting, which is made from a composition of iron, carbon, and silicon.

    • CI casting stands for cast iron casting.

    • It is made from a composition of iron, carbon, and silicon.

    • The carbon content in CI casting is typically between 2.1% and 4%.

    • The silicon content in CI casting is typically between 1% and 3%.

    • CI casting is known for its excellent castability, good machinability, and high wear resis

  • Answered by AI
  • Q4. High crome metal pouring temperature
  • Ans. 

    The pouring temperature of high chrome metal is typically between 1,600 to 1,800 degrees Celsius.

    • High chrome metal is commonly used in applications that require high temperature resistance and corrosion resistance.

    • The pouring temperature is crucial to ensure proper flow and solidification of the metal.

    • The specific pouring temperature may vary depending on the exact composition of the high chrome metal and the desired p...

  • Answered by AI
  • Q5. Maild steel campotion
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Introduce your self
  • Q2. What is the use of accumulator in tube mill
  • Ans. 

    Accumulator in tube mill is used to store and regulate the flow of strip during continuous production.

    • Accumulator helps in maintaining a constant speed of the tube mill by storing excess strip during high-speed operation and releasing it during low-speed operation.

    • It also helps in reducing the number of welds required in the production process by allowing continuous feeding of strip into the mill.

    • Accumulators can be of...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. 1. Least count of different scales like vernier calliper, micrometer etc
  • Ans. 

    The least count of vernier caliper is 0.02 mm and that of micrometer is 0.01 mm.

    • Least count of vernier caliper is 0.02 mm

    • Least count of micrometer is 0.01 mm

    • Least count is the smallest measurement that can be read on the scale

    • It is important to know the least count for accurate measurements

  • Answered by AI
  • Q2. What is metal? Types of metals and there chemical composition.
  • Ans. 

    Metals are elements that have high electrical conductivity, luster, and malleability.

    • Metals are typically solid at room temperature, except for mercury which is a liquid.

    • Common types of metals include iron, copper, aluminum, gold, silver, and zinc.

    • Metals can be classified as ferrous or non-ferrous based on their iron content.

    • The chemical composition of metals varies depending on the specific element, but they all have ...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Family details, previous experience if any, if fresher than what were the scores of qualifications

Interview Preparation Tips

Topics to prepare for APL Apollo Tubes Production Engineer interview:
  • Sheet Metal
  • Metallurgy
Interview preparation tips for other job seekers - Be always prepared about what is the company’s vision and what are the company’s main products. Always try to gain maximum knowledge of that product.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

General questions from graduation subjects & questions from Quantitative aptitude. Overall paper difficulty was at medium level.

Round 3 - Technical 

(6 Questions)

  • Q1. Introduce yourself. Different types of measuring instruments & their applications, least count.
  • Q2. Project details done in graduation last semester.
  • Q3. Applications of measuring instruments.
  • Ans. 

    Measuring instruments are used in various applications to accurately measure physical quantities.

    • Quality control in manufacturing processes

    • Monitoring and controlling environmental conditions

    • Testing and calibration of equipment

    • Research and development

    • Process optimization and efficiency improvement

    • Data collection and analysis

    • Safety and hazard detection

    • Medical diagnostics and patient monitoring

  • Answered by AI
  • Q4. Different types of castings & their uses.
  • Ans. 

    Different types of castings & their uses

    • Sand casting: used for large and complex shapes like engine blocks

    • Investment casting: used for intricate and detailed parts like jewelry

    • Die casting: used for high-volume production of small to medium-sized parts like car components

    • Centrifugal casting: used for cylindrical shapes like pipes and tubes

    • Continuous casting: used for producing long and continuous shapes like steel bille

  • Answered by AI
  • Q5. Manufacturing processes & their applications.
  • Ans. 

    Manufacturing processes are techniques used to transform raw materials into finished products.

    • Casting: pouring molten metal into a mold to create a solid object (e.g. automotive engine blocks)

    • Machining: removing material from a workpiece using cutting tools (e.g. CNC milling)

    • Forming: shaping materials through deformation (e.g. sheet metal bending)

    • Joining: combining multiple parts into a single entity (e.g. welding)

    • Addi...

  • Answered by AI
  • Q6. Difference between first and third angle projection in mechanical drawings.
  • Ans. 

    First angle projection and third angle projection are two different methods used in mechanical drawings to represent a 3D object on a 2D plane.

    • First angle projection is commonly used in Europe and Asia, while third angle projection is commonly used in North America.

    • In first angle projection, the object is placed in the first quadrant and the views are projected onto the planes surrounding the object.

    • In third angle proj...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Electrotherm Production Engineer interview:
  • Manufacturing processes
Interview preparation tips for other job seekers - Prepare for basic technical questions which can be used in written test & interview also.

I applied via Naukri.com and was interviewed in Jul 2022. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Kazan in the deppt. And Regular work maximum out put
  • Q2. Hard working. Falxable processing

Interview Preparation Tips

Interview preparation tips for other job seekers - Maximum out put. And semple of working.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Name and biodata
  • Ans. 

    My name is John Doe, a Production Engineer with 5 years of experience in manufacturing industry.

    • Name: John Doe

    • Experience: 5 years in manufacturing industry

    • Role: Production Engineer

  • Answered by AI
  • Q2. Technical and experience
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What is stainless steel ?
  • Ans. 

    Stainless steel is a corrosion-resistant alloy made of iron, chromium, nickel, and other elements.

    • Stainless steel is known for its resistance to corrosion, rust, and staining.

    • It is commonly used in various industries such as construction, automotive, and food processing.

    • There are different grades of stainless steel, each with varying levels of corrosion resistance and strength.

    • Examples of stainless steel applications i...

  • Answered by AI
  • Q2. Why annealing we needed?
  • Ans. 

    Annealing is needed to relieve internal stresses, improve ductility, and soften the material for further processing.

    • Annealing helps to remove internal stresses in the material, making it more ductile and less prone to cracking.

    • It also helps to soften the material, making it easier to shape or machine.

    • Annealing can improve the microstructure of the material, leading to better mechanical properties.

    • Examples of materials ...

  • Answered by AI
Round 2 - Group Discussion 

Discussed on my jobs profile

Interview Preparation Tips

Topics to prepare for Jindal Stainless Production Engineer interview:
  • Steel making and production plan
Interview preparation tips for other job seekers - CRM production engineer

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement and was interviewed before Jul 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Logical reasoning and general knowledge

Round 2 - Group Discussion 

Current affairs and general affairs

Round 3 - One-on-one 

(2 Questions)

  • Q1. Related to the core subject
  • Q2. Related to matarials

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident about your answers

ISMT Interview FAQs

How many rounds are there in ISMT Production Engineer interview?
ISMT interview process usually has 2 rounds. The most common rounds in the ISMT interview process are Resume Shortlist and Technical.
What are the top questions asked in ISMT Production Engineer interview?

Some of the top questions asked at the ISMT Production Engineer interview -

  1. Types of Steel and their chemical compositi...read more
  2. What is Heat treatme...read more
  3. Types of Heat treatme...read more

Tell us how to improve this page.

Fast track your campus placements

View all
ISMT Production Engineer Salary
based on 20 salaries
₹3.5 L/yr - ₹6 L/yr
24% more than the average Production Engineer Salary in India
View more details

ISMT Production Engineer Reviews and Ratings

based on 4 reviews

2.6/5

Rating in categories

3.0

Skill development

2.1

Work-life balance

2.4

Salary

3.5

Job security

2.4

Company culture

1.5

Promotions

2.4

Work satisfaction

Explore 4 Reviews and Ratings
Executive
81 salaries
unlock blur

₹2.4 L/yr - ₹6.5 L/yr

Executive Engineer
78 salaries
unlock blur

₹3 L/yr - ₹6.5 L/yr

Assistant Manager
25 salaries
unlock blur

₹5.1 L/yr - ₹10.7 L/yr

Junior Supervisor
24 salaries
unlock blur

₹1.7 L/yr - ₹3.2 L/yr

Production Engineer
20 salaries
unlock blur

₹3.5 L/yr - ₹6.1 L/yr

Explore more salaries
Compare ISMT with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Jindal Stainless

4.2
Compare

Jindal Saw

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview